Beata Oswald-Tranta

Research output

  1. 2024
  2. Published

    Automated surface crack detection with inductive thermography

    Oswald-Tranta, B., 1 Nov 2024, In: E-Journal of nondestructive testing. 29.2024, 11, 4 p., 30301.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Nondestructive Testing Handbook: Vol. 4, Thermal and Infrared Testing (IR), 4th ed.

    Oswald-Tranta, B., Nov 2024, NONDESTRUCTIVE TESTING HANDBOOK. USA, p. 443 - 455 part 8

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  4. Published

    Crack characterization in manganese steel using a µ-bolometer camera and an air-cooled inductor

    Tuschl, C., Oswald-Tranta, B., Dornig, P., Künstner, D., Pötz, M. & Eck, S., Jun 2024, Thermosense: Thermal Infrared Applications XLVI. Avdelidis, N. P. (ed.). SPIE, 8 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13047).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published
  6. Published

    A novel approach to the realisation of a rail specimen with defined surface cracks in work-hardening manganese steel for the calibration of inductive thermographic measurements

    Tuschl, C., Oswald-Tranta, B., Künstner, D. & Eck, S., 2024, 17th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published

    Automatic detection based on Deep Learning of small cracks in induction thermography using images from FEM Simulation Models

    Antero, O., Muniategui, A., Gorostegui-Colinas, E., Oswald-Tranta, B. & Westphal, P., 2024, 17th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Published

    Development of Active Thermography for NDT applications through Standardisation

    Ziegler, M., Maillard, S., Müller, D., Oswald-Tranta, B., Svantner, M., Bouteille, P., Huillery, R., Delemontez, J. & Cauiler, Y., 2024, 17th Quantitative Infrared Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Published

    Inductive Thermography – a non-destructive inspection technique

    Oswald-Tranta, B., 2024, 17th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Published

    Inspection of short surface cracks by inductive thermography and by computer tomography

    Oswald-Tranta, B., Hackl, A., Gorostegui-Colinas, E., Merino, A. M. & Westphal, P., 2024, Thermosense: Thermal Infrared Applications XLVI. Lopez, F., Avdelidis, N. P. & Ferrarini, G. (eds.). SPIE, 130470P. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13047).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. 2023
  12. Published

    Comparison of Inductive Thermography and Computer Tomography Results for Short Surface Cracks

    Oswald-Tranta, B., 14 Nov 2023, In: Engineering proceedings. 51.2023, 1, 5 p., 36.

    Research output: Contribution to journalArticleResearchpeer-review

  13. E-pub ahead of print

    Thermographic Estimation of the Area and Depth of Buried Heat Sources for Nondestructive Characterization of Horizontal Defects

    Mendioroz, A., Salazar, A., Lasserre, P., Oswald-Tranta, B. & Tuschl, C., 15 Oct 2023, (E-pub ahead of print) In: Journal of Nondestructive Evaluation. 42.2023, 4, 14 p., 91.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Scannende Detektion von Oberflächenfehlern in Weichenherzen mittels induktiver Thermografie

    Tuschl, C., Oswald-Tranta, B., Agathocleous, T., Eck, S. & Dornig, P., Oct 2023, DGZfP-Berichtsband BB 180. Vol. 180.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Published

    Scanning pulse phase thermography for surface defect detection in manganese steel turnout frogs

    Tuschl, C., Oswald-Tranta, B., Eck, S. & Dornig, P., Aug 2023, In: Research and review journal of nondestructive testing. 1.2023, 1, 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  16. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Scanning inductive pulse phase thermography with changing scanning speed for non-destructive testing

    Tuschl, C., Oswald-Tranta, B., Agathocleous, T. & Eck, S., 2 Feb 2023, In: Quantitative InfraRed Thermography Journal. 21.2024, 3, p. 156-171 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Comparison of hit/miss and ‘â versus a’ POD calculations for short surface cracks using inductive thermography

    Oswald-Tranta, B., de Uralde Olavera, P. L., Gorostegui-Colinas, E. & Westphal, P., 2023

    Research output: Non-textual formWeb publication/siteResearch

  19. Published

    Convolutional neural network for automated surface crack detection in inductive thermography

    Oswald-Tranta, B., de Uralde Olavera, L. P., Gorostegui-Colinas, E. & Westphal, P., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Published

    Estimation of the area and depth of buried heat sources: an approach to characterize defects in inductive and ultrasound excited thermography

    Mendioroz, A., Salazar, A., Oswald-Tranta, B. & Tuschl, C., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360M. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    Scanning inductive thermography using a µ-bolometer and a visual camera

    Tuschl, C., Agathocleous, T., Oswald-Tranta, B. & Eck, S., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. 2022
  23. E-pub ahead of print

    Calculating probability of detection of short surface cracks using inductive thermography

    Oswald-Tranta, B., Hackl, A., Lopez de Uralde Olavera, P., Gorostegui-Colinas, E. & Rosell, A., 23 Dec 2022, (E-pub ahead of print) In: Quantitative InfraRed Thermography Journal. 21.2024, 2, p. 82-101 20 p.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published
  25. Published

    Scanning Inductive Thermographic Surface Defect Inspection of Long Flat or Curved Work-Pieces Using Rectification Targets

    Tuschl, C., Oswald-Tranta, B. & Eck, S., 8 Jun 2022, In: Applied Sciences : open access journal. 12.2022, 12, 14 p., 5851.

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Inline NDT for thermoplastic Automated Tape Layup

    Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.

    Research output: Contribution to conferencePosterResearch

  27. Published

    Probability of detection for short surface cracks using inductive thermography

    Oswald-Tranta, B., Hackl, A., Gorostegui-Colinas, E. & Rosell, A., 2022, 16th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  28. 2021
  29. E-pub ahead of print

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  30. E-pub ahead of print

    Detection and characterisation of short fatigue cracks by inductive thermography

    Oswald-Tranta, B., 28 Jul 2021, (E-pub ahead of print) In: Quantitative InfraRed Thermography Journal. 2021, 22 p.

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    The Detection and Characterization of Defects in Metal/Non-metal Sandwich Structures by Thermal NDT, and a Comparison of Areal Heating and Scanned Linear Heating by Optical and Inductive Methods

    Chulkov, A. O., Tuschl, C., Nesteruk, D. A., Oswald-Tranta, B., Vavilov, V. P. & Kuimova, M. V., 21 May 2021, In: Journal of Nondestructive Evaluation. 2021, 40, p. 44-56 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Inductive Thermography as Non-Destructive Testing for Railway Rails

    Tuschl, C., Oswald‐Tranta, B. & Eck, S., 22 Jan 2021, In: Applied Sciences : open access journal. 11.2021, 3, 17 p., 1003.

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Detection of subsurface cracks using inductive thermography

    Oswald-Tranta, B., Tuschl, C. & Hackl, A., 2021, Thermosense: Thermal Infrared Applications XLIII. Zalameda, J. N. (ed.). SPIE, The Internat. Soc. for Optical Engineering, Vol. 11743. 117430G. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11743).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. 2020
  35. Published

    Comparison of different inspection techniques for fatigue cracks

    Oswald-Tranta, B., Feistkorn, S., Rössler, G. & Scherrer, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, The Internat. Soc. for Optical Engineering, Vol. 11409. 114090C. (Proceedings of SPIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Published

    Detection of short fatigue cracks by inductive thermography

    Oswald-Tranta, B., Feistkorn, S., Rössler, G., Tuschl, C. & Scherrer, M. C., 2020, 15th Quantitative InfraRed Thermography Conference 6 – 10 July 2018, Porto, Portugal.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Published

    Online thermography inspection for automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Published

    Scanning thermal testing of subsurface defects in metal - coating structures

    Chulkov, A., Oswald-Tranta, B., Tuschl, C. & Vavilov, V. P., 2020, in Proc. of 15th QIRT Conf., 2020.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. 2019
  40. Published

    Lock-in inductive thermography for surface crack detection in different metals

    Oswald-Tranta, B., 24 Mar 2019, In: Quantitative InfraRed Thermography Journal. 2019, March, 25 p.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  42. Published

    Induction thermography - a non-destructive testing method

    Oswald-Tranta, B., 2019, QIRT KOnferenz Sammelband. Tokyo

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Published

    Schienenprüfung mittels induktiv angeregter Thermografie

    Tuschl, C., Oswald-Tranta, B., Künstner, D. & Eck, S., 2019.

    Research output: Contribution to conferencePaperpeer-review

  44. Published

    Untersuchung von CFK Proben mit induktiv angeregter Thermografie

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.

    Research output: Contribution to conferencePaperpeer-review

  45. Published

    Vergleich von Induktions- und Blitzthermografie

    Oswald-Tranta, B. & Tuschl, C., 2019, Thermografieforum Eugendorf.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. 2018
  47. Published

    Induction Thermography for Surface Crack Detection and Depth Determination

    Oswald-Tranta, B., Feb 2018, In: Applied Sciences : open access journal. 8, 2

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Temperature reconstruction of infrared images with motion deblurring

    Oswald-Tranta, B., 11 Jan 2018, In: Journal of Sensors and Sensor Systems. 7.2018, 1, p. 13-20 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Lock-in inductive thermography for surface crack detection

    Oswald-Tranta, B., 1 Jan 2018, Thermosense: Thermal Infrared Applications XL. SPIE, Vol. 10661. 106610U

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  50. Published

    Lock-in inductive thermography for surface crack detection in non-magnetic metals

    Oswald-Tranta, B. & Tuschl, C., 2018, 14th Quantitative InfraRed Thermography Conference: 25 – 29 June 2018, Berlin, Germany. Vol. 10.21611/qirt.2018.c. p. 243-252 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  51. 2017
  52. Published

    Comparative study of thermal contrast and contrast in thermal signal derivatives in pulse thermography

    Oswald-Tranta, B., 1 Oct 2017, In: NDT and E international. 91.2017, October, p. 36-46 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    Probability of detection analysis of round robin test results performed by flash thermography

    Rothbart, N., Maierhofer, C., Goldammer, M., Hohlstein, F., Koch, J., Kryukov, I., Mahler, G., Stotter, B., Walle, G., Oswald-Tranta, B. & Sengebusch, M., Jun 2017, In: Quantitative infra red thermography (QIRT Journal). 14.2017, 1, p. 1-23 23 p.

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Motion Deblurring of Infrared Images

    Oswald-Tranta, B., 2017, AMA Conferences 2017 - SENSOR 2017 and IRS² 2017.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Published

    Rissdetektion in nicht-magnetischen und magnetischen Materialien mit induktiver Thermographie

    Oswald-Tranta, B., 2017, Thermographie-Kolloquium 2017. Vol. 163.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  56. Published

    Surface crack detection in different materials with inductive thermography

    Oswald-Tranta, B., 2017, Thermosense: Thermal Infrared Applications XXXIX. SPIE, Vol. 10214. 102140W

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. Published

    Thermographic investigations of metal inclusions in 3D printed samples

    Oswald-Tranta, B., Schmidt, R. & Tuschl, C., 2017, Thermosense: Thermal Infrared Applications XXXIX. SPIE, Vol. 10214. 102140S

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Published

    Time and frequency behaviour in TSR and PPT evaluation for flash thermography

    Oswald-Tranta, B., 2017, In: Quantitative infra red thermography (QIRT Journal). 14.2017, 2, p. 164-184 21 p.

    Research output: Contribution to journalArticleResearchpeer-review

  59. 2016
  60. Published

    Blitztherografische Untersuchungen an CFK- und Kunststoffbauteilen

    Oswald-Tranta, B. & Grandl, T., 23 Sept 2016, Thermografieforum Eugendorf 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  61. Published

    Thermal (IR) and Other NDT Techniques for Improved Material Inspection

    Balageas, D., Maldague, X., Burleigh, D., Vavilov, V. P., Oswald-Tranta, B., Roche, J.-M., Pradere, C. & Carlomagno, G. M., 19 Jan 2016, In: Journal of Nondestructive Evaluation.

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published

    Comparison of time and frequency behavior in TSR and PPT evaluation

    Oswald-Tranta, B., 2016, TWELFTH INTERNATIONAL CONFERENCE ON QUALITY CONTROL BY ARTIFICIAL VISION. Vol. 9861.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Published

    Investigations for Determining Surface Crack Depth with Inductive Thermography

    Oswald-Tranta, B., 2016, Proceedings 19th World Conference on Non-Destructive Testing 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  64. 2015
  65. Published

    A Round Robin Test of Flash Thermography of CFRP and Metal Structures

    Rothbart, N., Maierhofer, C., Goldammer, M., Hohlstein, F., Koch, J., Kryukov, I., Mahler, G., Stotter, B., Walle, G., Oswald-Tranta, B. & Sengebusch, M., 19 Nov 2015, 7th International Symposium on NDT in Aerospace. Vol. 156.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  66. Published

    Detektion von Rissen und Bestimmung der Risstiefe mit induktiver Thermografie

    Oswald-Tranta, B., Schmidt, R. & Buchmayr, B., 13 May 2015, Berichtsband DACH-Jahrestagung 2015. Salzburg, Vol. 152.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  67. Published

    Untersuchungen zur Bestimmung der Risstiefe mit induktiver Thermografie

    Oswald-Tranta, B., 2015, Thermographie-Kolloquium 2015. Vol. 154. (Thermographie-Kolloquium 2015; vol. 154, no. 14).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  68. 2014
  69. Published

    Defect depth determination in a CFRP structure using TSR technique

    Oswald-Tranta, B., Maier, A. & Schledjewski, R., 2014

    Research output: Non-textual formWeb publication/siteResearch

  70. Published

    Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

    Maier, A., Schmidt, R., Oswald-Tranta, B. & Schledjewski, R., 2014, In: Materials. 7, p. 413-429

    Research output: Contribution to journalArticleResearchpeer-review

  71. Published

    Thermografische Messungen von Ventilgehäusen

    Oswald-Tranta, B. & Schmidt, R., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  72. Published

    Thermografische Messung von Bestrahlungsversuchen

    Oswald-Tranta, B. & Schmidt, R., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  73. Published

    Thermografische Oberflächenprüfung von Draht

    Oswald-Tranta, B. & Schmidt, R., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  74. Published

    Thermografische Prüfung von Gussteilen

    Oswald-Tranta, B. & Schmidt, R., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  75. Published

    Thermografische Prüfung von Verbundwerkstoffen

    Oswald-Tranta, B. & Schmidt, R., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  76. Published

    Thermografische Schweißnahtprüfung

    Oswald-Tranta, B. & Schmidt, R., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  77. Published

    Thermografische Untersuchungen von Glasfaserplatten

    Oswald-Tranta, B. & Schmidt, R., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  78. 2013
  79. Published

    Blitzlichtthermografie von faserverstärkten Verbundwerkstoffen

    Ritt, R. & Oswald-Tranta, B., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  80. Published

    Comparison of Pulse Phase and Thermographic Signal Reconstruction Processing Methods

    Oswald-Tranta, B. & Shepard, S. M., 2013, Proc. of SPIE Vol. 8705. p. 87050S-1-87050S-9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  81. Published

    Economic investigation of impact damage using non-destruction thermography analysis on structural automotive parts

    Maier, A., Schledjewski, R. & Oswald-Tranta, B., 2013, ICSAAM 2013. p. 1-18

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  82. Published

    Infrarotmessungen an Walzdraht mit 2 Kameras

    Oswald-Tranta, B., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  83. Published

    Sortierung von Aluminium-Recyclinggut

    Prettenthaler, P. & Oswald-Tranta, B., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  84. Published

    Thermografische Messung von gesinterten Proben im Labor

    Oswald-Tranta, B. & Schmidt, R., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  85. Published

    Thermo-induktive Prüfung von Gussteilen

    Oswald-Tranta, B. & Schmidt, R., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  86. 2012
  87. Published

    Automated thermographic non-destructive testing

    Oswald-Tranta, B., 2012

    Research output: ThesisHabilitation thesispeer-review

  88. Published

    Fusion of geometric and thermographic data for automated defect detection

    Oswald-Tranta, B. & O'Leary, P., 2012, In: Journal of electronic imaging. 21, p. 021108-1-8

    Research output: Contribution to journalArticleResearchpeer-review

  89. Published

    Messungen von Drahtproben im Labor

    Oswald-Tranta, B. & Schmidt, R., 2012

    Research output: Book/ReportCommissioned reportTransferpeer-review

  90. Published

    Scanning Pulse Phase Thermografie mit induktiver linearer Heizung

    Oswald-Tranta, B., 2012, DGZfP Berichtsband 136-CD, DACH Jahrestagung 2012.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  91. Published

    Scanning Pulse Phase Thermography with inductive line source

    Oswald-Tranta, B. & Sorger, M., 2012, 11th International Conference on Quantitative Infrared Thermography. p. 264-1-264-10

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Published

    Scanning pulse phase thermography with line heating

    Oswald-Tranta, B. & Sorger, M., 2012, In: Quantitative infra red thermography (QIRT Journal). 9, p. 103-122

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Thermografie - Zerstörungsfreie Prüfung

    Oswald-Tranta, B. & Sorger, M., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  94. Published

    Thermografische Rissprüfung von Metallteilen, Zwischenbericht

    Oswald-Tranta, B. & Sorger, M., 2012

    Research output: Book/ReportCommissioned reportTransferpeer-review

  95. Published

    Thermo-induktive Prüfung von Turbogehäusen, Ergebnisse

    Oswald-Tranta, B., Schmidt, R. & Probst, G., 2012

    Research output: Book/ReportCommissioned reportTransferpeer-review

  96. 2011
  97. Published

    THERMOGRAFISCHE PRÜFVORRICHTUNG

    Oswald-Tranta, B. (Inventor), O'Leary, P. (Inventor) & Wally, G. (Inventor), 15 Nov 2011, IPC No. G01N 25/ 72 A I, Patent No. AT530897T, Priority date 30 Jun 2008, Priority No. EP20080011811

    Research output: Patent

  98. Published

    Detection of subsurface defects in aluminium with thermoinductive inspection

    Oswald-Tranta, B. & Sorger, M., 2011, Proceedings Vol. 8013. p. 00-00

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  99. Published

    Fusion of geometric and thermographic data for the automatic inspection of forging and castings

    Oswald-Tranta, B. & O'Leary, P., 2011, Proc. of SPIE 8000. p. 80000G-1-80000G-9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  100. Published

    Infrarotmessungen an Walzdraht

    Oswald-Tranta, B. & Sorger, M., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  101. Published
  102. Published

    Thermografische Rissprüfung von Metallteilen

    Oswald-Tranta, B. & Sorger, M., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  103. Published

    Thermo-induktive Prüfung von Turbogehäusen

    Oswald-Tranta, B. & Sorger, M., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  104. Published

    Untersuchung der Tropfengröße einer Wasserdüse

    Oswald-Tranta, B. & Sorger, M., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  105. 2010
  106. Published
  107. Published

    Automatic defect classification in inductive thermo-graphical testing

    Oswald-Tranta, B. & Sorger, M., 2010, QIRT 2010, Proceedings. p. 511-517

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  108. Published

    Motion deblurring of infrared images from a microbolometer camera

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2010, In: Infrared Physics & Technology. 53, p. 274-279

    Research output: Contribution to journalArticleResearchpeer-review

  109. Published
  110. Published

    Thermographic crack detection and failure classification

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2010, In: Journal of electronic imaging. 19, p. 031204-1-031204-7

    Research output: Contribution to journalArticleResearchpeer-review

  111. Published

    Vergleich von 10kW-und 30kW-Generator sowie von Spulen mit 5 bzw. 70 Windungen

    Oswald-Tranta, B. & Sorger, M., 2010

    Research output: Book/ReportCommissioned reportTransferpeer-review

  112. 2009
  113. Published

    SYSTEM AND METHOD FOR THE DEFECT ANALYSIS OF WORKPIECES

    O'Leary, P. (Inventor) & Oswald-Tranta, B. (Inventor), 23 Sept 2009, IPC No. G01B11/04, Priority date 12 Dec 2006

    Research output: Patent

  114. Published

    Object processing System, Thermographische Rissfindung von einzelnen Metallteilen

    Oswald-Tranta, B. (Inventor) & O'Leary, P. (Inventor), 24 Jun 2009, IPC No. EP2073002 (A1), Patent No. EP 07024827.3., Priority date 20 Dec 2007

    Research output: Patent

  115. Published

    Thermografische Rissdetektion auf glühendem Walzdraht - Status

    Brebric, C. & Oswald-Tranta, B., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  116. Published

    Thermografische Rissdetektion auf glühendem Walzdraht - Status 2

    Brebric, C., Sorger, M. & Oswald-Tranta, B., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

Previous 1 2 Next