Anton Hohenwarter

101 - 200 out of 215Page size: 100

Research output

  1. 2017
  2. Published

    Fatigue crack closure: a review of the physical phenomena

    Pippan, R. & Hohenwarter, A., 1 Apr 2017, In: Fatigue and Fracture of Engineering Materials and Structures. 40.2017, 4, p. 471-495 25 p.

    Research output: Contribution to journal › Review article › peer-review

  3. Published

    Fracture of severely plastically deformed Ta and Nb

    Hohenwarter, A., Wurster, S. & Völker, B., 1 Apr 2017, In: International Journal of Refractory Metals and Hard Materials. 64.2017, April, p. 143-150 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Fatigue crack growth anisotropy in ultrafine-grained iron

    Leitner, T., Hohenwarter, A., Ochensberger, W. & Pippan, R., 1 Mar 2017, In: Acta materialia. 126.2017, March, p. 154-165 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Phase stability of a TaTifHrZrNb high-entropy alloy

    Schuh, B., Hohenwarter, A., Völker, B., Todt, J. & Couzinié, J.-P., 1 Mar 2017.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Structural anisotropy in equal-channel angular extruded nickel revealed by dilatometric study of excess volume

    Kotzurek, J. A., Sprengel, W., Krystian, M., Simic, S., Pölt, P., Hohenwarter, A., Pippan, R. & Würschum, R., 31 Jan 2017, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 108.2017, 2, p. 81-88 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

    Völker, B., Jäger, N., Calin, M., Zehetbauer, M. J., Eckert, J. & Hohenwarter, A., 15 Jan 2017, In: Materials & design. 114.2017, 15 January, p. 40-46 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing

    Schuh, B., Völker, B., Maier-Kiener, V., Todt, J., LI, J. & Hohenwarter, A., 3 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 10 p., 1600674.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2017, Materials Structure and Micromechanics of Fracture VIII. Trans Tech Publications, Vol. 258 SSP. p. 265-268 4 p. (Solid State Phenomena; vol. 258 SSP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2016
  12. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 29 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II + III in niobium and titanium

    Vojtek, T., Hohenwarter, A., Pippan, R. & Pokluda, J., 1 Nov 2016, In: International Journal of Fatigue. 92.2016, Part 2, November, p. 470-477 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Prediction of effective mode II fatigue crack growth threshold for metallic materials

    Vojtek, T., Pippan, R., Hohenwarter, A. & Pokluda, J., 16 Sept 2016, In: Engineering Fracture Mechanics. 174.2017, 1 April, p. 117-126 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Ultra-strong and damage tolerant metallic bulk materials: A lesson from nanostructured pearlitic steel wires

    Hohenwarter, A., Völker, B., Kapp, M., Li, Y., Goto, S., Raabe, D. & Pippan, R., 14 Sept 2016, In: Scientific reports (London : Nature Publishing Group). 6.2016, 10 p., 33228.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Phase decomposition of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Todt, J., Hohenwarter, A., Maier-Kiener, V. & Li, J., 5 Aug 2016.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Direct measurement of vacancy relaxation by dilatometry

    Kotzurek, J. A., Steyskal, E.-M., Oberdorfer, B., Hohenwarter, A., Pippan, R., Sprengel, W. & Würschum, R., 14 Jul 2016, In: Applied physics letters. 109.2016, 2, 5 p., 021906.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The Influence of Grain Size on the Fatigue Crack Growth of Ultrafine-grained Metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 28 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    A comparison of the fatigue crack growth behavior of pure ultrafine-grained metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Near-threshold fatigue crack growth behavior of ultrafine-grained metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 3 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Microstructural and mechanical comparison of Ti and Ti-alloys after severe plastic deformation

    Völker, B., Jäger, N., Wurster, S., Hohenwarter, A. & Pippan, R., 2 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Der Risswiderstand von ultrafeinkörnigen Metallen unter zyklischer Belastung

    Leitner, T., Hohenwarter, A. & Pippan, R., 13 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    The importance of fracture toughness in ultrafine and nanocrystalline bulk materials

    Pippan, R. & Hohenwarter, A., 12 Apr 2016, In: Materials Research Letters [Elektronische Ressource]. 4.2016, 3, p. 127-136 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Revisiting Fatigue Crack Growth in UFG Ni and Fe

    Leitner, T., Hohenwarter, A. & Pippan, R., 22 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Mechanical properties of pure titanium and a Nb-containing titanium alloy: A comparative study

    Völker, B., Jäger, N., Wurster, S., Hohenwarter, A., Zehetbauer, M. J. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Revisiting Fatigue Crack Growth in UFG metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 17 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Microstrucural Investigations of a nanocrystalline CoCrNi alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Völker, B. & Maier-Kiener, V., 6 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion

    Dimić, I., Cvijović-Alagić, I., Völker, B., Hohenwarter, A., Pippan, R., Veljović, D., Rakin, M. & Bugarski, B., 5 Feb 2016, In: Materials & design. 91.2016, 5 February, p. 340-347 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

    Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P. & Ritchie, R. O., 2 Feb 2016, In: Nature Communications. 7.2016, 8 p., 10602.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel

    Kapp, M., Hohenwarter, A., Wurster, S., Yang, B. & Pippan, R., 21 Jan 2016, (E-pub ahead of print) In: Acta materialia. 106.2016, March, p. 239-248 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Deformation and fracture characteristics of ultrafine-grained vanadium

    Hohenwarter, A. & Wurster, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, p. 492-496 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Fracture of Severely Plastically Deformed Metals

    Hohenwarter, A., Pippan, R., Völker, B., Kapp, M. W., Kammerhofer, C. & Leitner, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Fracture of Severely Plastically Deformed Niobium and Tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Fracture of ultrafine-grained and nanocrystalline materials

    Hohenwarter, A., Völker, B., Leitner, T. & Kapp, M. W., 2016.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Mechanical properties of severely plastically deformed niobium and tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Microstructure and mechanical properties of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Li, J., Maier, V., Pippan, R. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    New advances in high pressure torsion processing

    Hohenwarter, A., Martin, R. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. 2015
  43. Published

    Tracking of Grain Boundary Movement Due to (Thermo-) Mechanical Deformation

    Wurster, S., Bigl, S., Renk, O., Cordill, M. J., Hohenwarter, A., Pippan, R. & Kiener, D., 24 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    Fatigue threshold of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    Revisiting fatigue crack growth in various grain size regimes of Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 294-305 12 p., 32705.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fracture behavior of high strength pearlitic steel wires

    Völker, B., Kapp, M. W., Pippan, R. & Hohenwarter, A., 5 Oct 2015.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 4 Oct 2015, In: International Journal of Fatigue. 89, p. 36-42 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Propagation of long fatigue cracks under remote modes II and III in ferritic-pearlitic steel

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 1 Oct 2015, In: Acta Physica Polonica A. 128, 4, p. 611-614 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    The influence of grain size on the fatigue crack growth of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 11 Aug 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Microstructure and chemistry evolution due to heat treatments after severe plastic deformation of a CrMnFeCoNi alloy

    Völker, B., Schuh, B. & Hohenwarter, A., 7 May 2015.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Einfluss der Korngröße auf des Rissfortschrittsverhalten von Nickel

    Leitner, T., Hohenwarter, A. & Pippan, R., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Microstructural investigations of a nanocrystalline high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H. & Pippan, R., 8 Apr 2015, p. 319.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Electron Backscatter Diffraction – How to read this information on polycrystalline films

    Wurster, S., Bigl, S., Renk, O., Gludovatz, B., Hohenwarter, A., Motz, C., Kiener, D. & Pippan, R., 22 Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  55. Published

    Fracture and fracture toughness of nanopolycrystalline metals produced by SPD

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  56. Published

    Fracture in severely plastically deformed metals - How toughness can be improved

    Hohenwarter, A., Völker, B., Leitner, T., Renk, O. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  57. Published

    Fracture resistance of pearlitic steels

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  58. Published

    Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

    Hohenwarter, A., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conference › Poster › Research

  61. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  62. 2014
  63. Published

    Fatigue crack growth behavior of ultrafine-grained nickel produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 30 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  64. Published

    Grain boundary excess volume and defect annealing of copper after high-pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E. M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 15 Apr 2014, In: Acta materialia. 68, p. 189-195 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Fatigue crack growth investigations on ultrafine-grained metals produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 5 Mar 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  66. Published

    3D morphology of fracture surfaces created by mixed-mode II+III fatigue loading in metallic materials

    Vojtek, T., Pokluda, J., Hohenwarter, A., Slamecka, K. & Pippan, R., 2014, In: Procedia Engineering. p. 74-77

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    A fracture resistant high-entropy alloy for cryogenic applications

    Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P. & Ritchie, R. O., 2014, In: Science. 345, p. 1153-1158

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear - first experimental results

    Kammerhofer, C., Hohenwarter, A. & Pippan, R., 2014, In: Wear. 316, p. 101-108

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Eine Legierung aus fünf Metallen

    Hohenwarter, A., 2014, In: Die Presse. p. x-x

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Fatigue crack growth behavior of ultrafine-grained nickel produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 2014, In: Procedia Materials Science. 3, p. 1044-1049

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Grain boundary excess volume and defect annelaing of copper after high pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E.-M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 2014, In: Acta materialia. 68, p. 189-195

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    High strength pearlitic nanocomposites

    Kapp, M., Hohenwarter, A., Wurster, S., Kammerhofer, C., Yang, B. & Pippan, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Influence of heat treatment on the microstructural evolution of Al-3 wt.% Cu during high-pressure torsion

    Hohenwarter, A., Faller, M., Rashkova, B. & Pippan, R., 2014, In: Philosophical magazine : Letters. 94, p. 342-350

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Innovatives Legierungskonzept mit außergewöhnlichen Eigenschaften: APA Science

    Hohenwarter, A., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  75. Published

    Investigation of the fatigue crack growth of ultrafine-grained and nanocrystalline Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Legierung mit einem hohen Potenzial: Kleine Zeitung - online

    Hohenwarter, A., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  77. Published

    Leobener Forscher finden neue Kältelegierung: ORF online

    Hohenwarter, A., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  78. Published

    Near-threshold behaviour of shear-mode fatigue cracks in metallic materials

    Pokluda, J., Pippan, R., Vojtek, T. & Hohenwarter, A., 2014, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 37, p. 232-254

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Neue Legierung wird bei tiefen Temperaturen zäher statt spröder: DerStandard-online

    Hohenwarter, A., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  80. 2013
  81. Published

    Enhanced fatigue endurance of metallic glasses through a staircase-like fracture mechanism

    Gludovatz, B., Demetriou, M. D., Floyd, M., Hohenwarter, A., Johnson, W. L. & Ritchie, R. O., 2013, In: Proceedings of the National Academy of Sciences of the United States of America (PNAS). 110, p. 18419-18424

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Fatigue crack growth investigations on ultrafine-grained metals produced by high pressure torsion

    Leitner, T., Hohenwarter, A. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms

    Hohenwarter, A. & Pippan, R., 2013, In: Acta materialia. 61, p. 2973-2983

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Influence of grain shape and orientation on the mechanical properties of high pressure deformed nickel

    Rathmayr, G. B., Hohenwarter, A. & Pippan, R., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 560, p. 224-231

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

    Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    In-situ microcompression experiments on a nanocrystalline pearlitic steel

    Kapp, M., Hohenwarter, A., Kammerhofer, C., Wurster, S. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  87. Published

    Near-threshold propagation of mode II and mode III fatigue cracks in ferrite and austenite

    Vojtek, T., Pippan, R., Hohenwarter, A., Holan, L. & Pokluda, J., 2013, In: Acta materialia. 61, p. 4625-4635

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Orientation sensitive in-situ testing of nanostructured pearlitic micropillars in a scanning electron microscope

    Kapp, M., Wurster, S., Hohenwarter, A., Kammerhofer, C. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Revealing local deformation mechanisms in the steady state regime of severely cold rolled copper

    Renk, O., Hohenwarter, A. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Revealing local deformation mechanisms in the steady state regime of severely cold rolled copper

    Renk, O., Hohenwarter, A. & Pippan, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Three-dimensional morphology of fracture surfaces generated by modes II and III fatigue loading in ferrite and austenite

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2013, In: Engineering Fracture Mechanics. 108, p. 285-293

    Research output: Contribution to journal › Article › Research › peer-review

  92. 2012
  93. Published

    A comprehensive study on the damage tolerance of ultrafine-grained copper

    Hohenwarter, A. & Pippan, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 540, p. 89-96

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Influence of grain shape and orientation on the mechanical properties of high pressure torsion deformed nickel

    Renk, O., Hohenwarter, A. & Pippan, R., 2012, In: Advanced engineering materials. 11, p. 948-954

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Influence of texture on the strength and fracture behavior of severely plastically deformed nickel

    Hohenwarter, A., Rathmayr, G. B. & Pippan, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  96. Published

    Near threshold fatigue crack propgation under mixed-mode II+III in armco iron

    Vojtek, T., Pokluda, J., Sandera, P., Hornikova, J., Slamecka, K., Hohenwarter, A. & Pippan, R., 2012, Proceedings of the European Conference on Fracture 19. p. 106-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. 2011
  98. Published

    An Overview on the Fracture Behavior of Metals Processed by High Pressure Torsion

    Hohenwarter, A. & Pippan, R., 2011, In: Materials Science Forum . 667-669, p. 671-676

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel

    Hohenwarter, A., Taylor, A., Stock, R. & Pippan, R., 2011, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42, p. 1609-1618

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Fracture toughness evaluation of ultrafine-grained nickel

    Hohenwarter, A. & Pippan, R., 2011, In: Scripta materialia. 64, p. 982-985

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Fracture toughness of SPD deformed rail steels

    Kammerhofer, C., Hohenwarter, A. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    The Effect of Severe Plastic Deformation on the Fatigue Behaviour of an Austenitic Stainless Steel

    Renk, O., Hohenwarter, A., Scheriau, S., Kleber, S. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  103. Published

    The effect of severe plastic deformation on the fatigue behaviour of an austenitic steel

    Renk, O., Hohenwarter, A., Scheriau, S., Kleber, S. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. 2010
  105. Published

    Anisotropic fracture behavior of ultrafine-grained iron

    Hohenwarter, A. & Pippan, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2649-2656

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Anisotropy of the fracture behavior of severely deformed iron and a pearlitic rail steel

    Hohenwarter, A. & Pippan, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. Published

    Fracture of ultrafine-grained metals produced by severe plastic deformation

    Hohenwarter, A., 2010

    Research output: Thesis › Doctoral Thesis

  108. Published

    Neue Werkstoffe aus plastischer Hochverformung Nanokristalline Metalle

    Pippan, R., Hohenwarter, A., Scheriau, S. & Bachmaier, A., 2010, In: Physik in unserer Zeit. p. 23-29

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (215)