Andreas Ludwig

401 - 450 out of 528Page size: 50

Research output

  1. 2007
  2. Published

    Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M., Tanzer, R. & Schützenhöfer, W., 2007, Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations. p. 493-496

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity

    Kharicha, A., Ludwig, A. & Wu, M., 2007, Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Experimental and Numerical Modelling of Cu-Sn Casting with Adjustable Solidification Front

    Eck, S., Ludwig, A., Mazumdar, D. & Evans, J. W., 2007, International Conference on Solidification Processing. p. 483-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Interaction between steel droplets and slag in the ESR process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Interaction between steel droplets and slag in the ESR process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Riedle, J. & Hofmann, U., 2007, Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation. p. 265-279

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Modeling Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, Xi'an International Symposium on Solidification (ISS07). p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Multiphase Modelling of the Slag Region in the ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Multiphase Modelling of the Slag Region in the ESR Process. p. 107-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys

    Gruber-Pretzler, M., Könözsy, L., Wu, M., Ludwig, A., Mathiesen, R. H., Schaffer, P. & Arnberg, L., 2007, Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys. p. 249-253

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel

    Mayer, F., Gruber-Pretzler, M., Wu, M. & Ludwig, A., 2007, Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel. p. 265-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot

    Könözsy, L., Mayer, F., Ishmurzin, A., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2007, Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Particle Entrapment in the Mushy Region of a Steel Continuous Caster

    Pfeiler, C., Thomas, B. G., Ludwig, A. & Wu, M., 2007, Particle Entrapment in the Mushy Region of a Steel Continuous Caster. p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Selected Numerical Investigations on ESR Process

    Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2007, The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling. p. 114-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2007, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38, p. 1465-1475

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2006
  21. Published

    A mixture two-phase model for predicting macrosegregations during solidification

    Tang, Y., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 283-290 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Control of interdendritic convection by the application of time-dependent magnetic fields during directional solidification of aluminium alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 317-324 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Modeling of macrosegregations in DC casting of Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Kuhn, H. A. & Riedle, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 799-806 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Multiphase flow simulation of the cooling channel rheocasting process of A356 alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 1071-1078 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Simulation of inclusion and bubble motion in a steel continuous caster

    Pfeiler, C., Wu, M., Ludwig, A., Chimani, C., Watzinger, J. & Dösinger, H., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 737-744 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Volume averaging concept for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 291-298 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Gravity-induced convection during directional solidification of hypermonotectic alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 1 Dec 2006, Solidification and Gravity IV - Proceedings of the 4th International Conference on Solidification and Gravity. p. 193-198 6 p. (Materials Science Forum; vol. 508).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    A three-phase model for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37.2006, 5, p. 1613-1631 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A 3-Phase Model for Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37A, p. 1613-1631

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006, A Mixture Two-Phase Model for Macrosegregation during Solidification. p. 283-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006, A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze. p. 799-806

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    About the formation of macrosegregations in continuous casting of Sn-Bronze

    Ludwig, A., Gruber-Pretzler, M., Wu, M., Kuhn, A. & Riedle, J., 2006, In: Fluid Dynamics and Materials Processing. 1, p. 285-300

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Continous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2006, Continous Casting. p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Johannes, D., Wu, M. & Ludwig, A., 2006, Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys. p. 317-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Ludwig, A., Eck, S. & Mogeritsch, J., 2006, In: Materials Science Forum . p. 157-162

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Eck, S., Ludwig, A. & Mogeritsch, J., 2006, Materials Science Forum Vol. 508. p. 157-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In: Materials Science Forum . 508-509, p. 193-198

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Modeling Macrosegregation with a Multiphase Approach: Examples and Applications

    Wu, M. & Ludwig, A., 2006, In: JOM. 58, p. 16-18

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Modeling of Macrosegregations in Continous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2006, Continous Casting. p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model

    Wang, TM., Zhang, XG., Jin, JZ., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - II. Application of model

    Wang, TM., Li, TJ., Jin, JZ., Cao, ZQ., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy

    Wang, TM., Pustal, B., Wu, M., Bührig-Polaczek, A., Ludwig, A., Yao, S., Hao, H., Li, TJ., Cao, ZQ., Zhang, XG. & Jin, JZ., 2006, Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy. p. 1071-1078

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Performance Studie zu Parallelrechnungen (Shared Memory vs. Cluster) von metallurgischen Mehrphasensimulationen

    Mayer, F., Wu, M., Ludwig, A., Gruber-Pretzler, M., Pfeiler, C., Hainke, M. & Otto, K-J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Simulation of Particle and Bubble Motion in a Steel Continuous Caster

    Pfeiler, C., Ludwig, A. & Wu, M., 2006, TMS Proceedings. p. 737-744

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique

    Ludwig, A., Kharicha, A., Schuetzenhoefer, W. & Reiter, G., 2006, Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique. p. 985-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)

    Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2005
  53. Published

    Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

    Ludwig, A. & Wu, M., 15 Dec 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...5 6 7 8 9 10 11 Next
View graph of relations

Latest Research Output

View more (528)