Andreas Ludwig

401 - 500 out of 533Page size: 100

Research output

  1. 2008
  2. Published

    Solidification and Particle Entrapment during Continuous Casting of Steel

    Pfeiler, C., Thomas, B. G., Wu, M., Ludwig, A. & Kharicha, A., 2008, In: Steel research international. 79, p. 599-607

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2007
  4. Published

    Determination of the solid-liquid interface energy in the Al-Cu-Ag system

    Bulla, A., Carreno-Bodensiek, C., Pustal, B., Berger, R., Bührig-Polaczek, A. & Ludwig, A., 1 Sept 2007, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38 A, 9, p. 1956-1964 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Using a three-phase deterministic model for the columnar-to-equiaxed transition

    Wu, M. & Ludwig, A., 1 Jul 2007, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38 A, 7, p. 1465-1475 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Lead-free bearing alloys for engine applications results of the ESA-MAP project MONOPHAS

    Ratke, L., Brück, S., Mathiesen, R., Ludwig, A., Gruber-Pretzler, M., Tonn, B., Gzovskyy, K., Gránásy, L., Tegze, G., Agren, J., Höglund, L., Arnberg, L., Gust, E., Anger, G., Lauer, M., Garen, R. & Reifenhäuser, B., 1 Apr 2007, In: Transactions of the Indian Institute of Metals. 60, 2-3, p. 103-111 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation. p. 130-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M., Tanzer, R. & Schützenhöfer, W., 2007, Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations. p. 493-496

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity

    Kharicha, A., Ludwig, A. & Wu, M., 2007, Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Experimental and Numerical Modelling of Cu-Sn Casting with Adjustable Solidification Front

    Eck, S., Ludwig, A., Mazumdar, D. & Evans, J. W., 2007, International Conference on Solidification Processing. p. 483-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Interaction between steel droplets and slag in the ESR process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Interaction between steel droplets and slag in the ESR process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Riedle, J. & Hofmann, U., 2007, Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation. p. 265-279

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Modeling Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, Xi'an International Symposium on Solidification (ISS07). p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Multiphase Modelling of the Slag Region in the ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Multiphase Modelling of the Slag Region in the ESR Process. p. 107-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys

    Gruber-Pretzler, M., Könözsy, L., Wu, M., Ludwig, A., Mathiesen, R. H., Schaffer, P. & Arnberg, L., 2007, Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys. p. 249-253

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel

    Mayer, F., Gruber-Pretzler, M., Wu, M. & Ludwig, A., 2007, Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel. p. 265-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot

    Könözsy, L., Mayer, F., Ishmurzin, A., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2007, Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Particle Entrapment in the Mushy Region of a Steel Continuous Caster

    Pfeiler, C., Thomas, B. G., Ludwig, A. & Wu, M., 2007, Particle Entrapment in the Mushy Region of a Steel Continuous Caster. p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Selected Numerical Investigations on ESR Process

    Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2007, The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling. p. 114-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2007, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38, p. 1465-1475

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2006
  27. Published

    A mixture two-phase model for predicting macrosegregations during solidification

    Tang, Y., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 283-290 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Control of interdendritic convection by the application of time-dependent magnetic fields during directional solidification of aluminium alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 317-324 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Modeling of macrosegregations in DC casting of Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Kuhn, H. A. & Riedle, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 799-806 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Multiphase flow simulation of the cooling channel rheocasting process of A356 alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 1071-1078 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Simulation of inclusion and bubble motion in a steel continuous caster

    Pfeiler, C., Wu, M., Ludwig, A., Chimani, C., Watzinger, J. & Dösinger, H., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 737-744 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Volume averaging concept for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 291-298 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Gravity-induced convection during directional solidification of hypermonotectic alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 1 Dec 2006, Solidification and Gravity IV - Proceedings of the 4th International Conference on Solidification and Gravity. p. 193-198 6 p. (Materials Science Forum; vol. 508).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    A three-phase model for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37.2006, 5, p. 1613-1631 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    A 3-Phase Model for Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37A, p. 1613-1631

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    About the formation of macrosegregations in continuous casting of Sn-Bronze

    Ludwig, A., Gruber-Pretzler, M., Wu, M., Kuhn, A. & Riedle, J., 2006, In: Fluid Dynamics and Materials Processing. 1, p. 285-300

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006, A Mixture Two-Phase Model for Macrosegregation during Solidification. p. 283-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006, A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze. p. 799-806

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Continous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2006, Continous Casting. p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  42. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Johannes, D., Wu, M. & Ludwig, A., 2006, Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys. p. 317-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Ludwig, A., Eck, S. & Mogeritsch, J., 2006, In: Materials Science Forum . p. 157-162

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Eck, S., Ludwig, A. & Mogeritsch, J., 2006, Materials Science Forum Vol. 508. p. 157-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In: Materials Science Forum . 508-509, p. 193-198

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Modeling Macrosegregation with a Multiphase Approach: Examples and Applications

    Wu, M. & Ludwig, A., 2006, In: JOM. 58, p. 16-18

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Modeling of Macrosegregations in Continous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2006, Continous Casting. p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  50. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - II. Application of model

    Wang, T., Li, T., Jin, J., Cao, Z., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model

    Wang, T., Zhang, X., Jin, J., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, A., Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 2006, Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy. p. 1071-1078

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Performance Studie zu Parallelrechnungen (Shared Memory vs. Cluster) von metallurgischen Mehrphasensimulationen

    Mayer, F., Wu, M., Ludwig, A., Gruber-Pretzler, M., Pfeiler, C., Hainke, M. & Otto, K.-J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Simulation of Particle and Bubble Motion in a Steel Continuous Caster

    Pfeiler, C., Ludwig, A. & Wu, M., 2006, TMS Proceedings. p. 737-744

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique

    Ludwig, A., Kharicha, A., Schuetzenhoefer, W. & Reiter, G., 2006, Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique. p. 985-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)

    Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. 2005
  59. Published

    Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

    Ludwig, A. & Wu, M., 15 Dec 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Simulation of cooling channel rheocasting process of A356 aluminum alloy using three-phase volume averaging model

    Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 1 Apr 2005, In: Transactions of Nonferrous Metals Society of China (English Edition). 15, 2, p. 389-394 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    A 3D Three-Phase Eulerian Solidification Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking. p. 273-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 485-489

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Continuous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 115-120

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model

    Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 79-84

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Modeling of Macrosegregations in Continuous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model

    Wang, T., Wu, M., Ludwig, A., Abondano, M., Pustal, B. & Bührig-Polaczek, A., 2005, In: International journal of cast metals research. 18, p. 221-228

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Numerical Description of Particle and Bubble Motion in the Submerged Entry Nozzle Region during Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, STEELSIM 2005. p. 231-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Numerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed Solidification

    Wu, M., Ludwig, A. & Luo, J., 2005, In: Materials Science Forum . 475-479, p. 2725-2730

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    On Distortions and Gap Formation during Solidification and Subsequent Cooling of a Cylindrical Casting

    Ludwig, A., Kron, J., Bellet, M., Pustal, B., Fredrikson, H. & Wendt, J., 2005, In: International journal of cast metals research. p. 295-310

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    On the Impact of Macroscopic Phase Separation on Solidification Microstructures

    Wu, M., Ludwig, A., Pelzer, M. & Postl, U., 2005, In: Advanced engineering materials. 7-9, p. 846-851

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Simulation of Cooling Channel Rheocasting Process of A356 Aluminium Alloy Using a Three-Phase Volume Averaging Model

    Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2005, In: Transactions of Nonferrous Metals Society of China. 15, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Simulation of droplet formation during DC Electroslag-remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking”. p. 343-360

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations

    Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  78. 2004
  79. Published

    Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation

    Kron, J., Bellet, M., Ludwig, A., Pustal, B., Wendt, J. & Fredriksson, H., 31 Dec 2004, In: International journal of cast metals research. 17.2004, 5, p. 295-310 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    About the interactions between thermo-solutal convection, shrinkage flow and grain sedimentation

    Ludwig, A., Wu, M., Wang, T. & Bührig-Polaczek, A., 2004, Computational Modeling and Simulation of Materials, III, Part B.. p. 491-502

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Chapter 23: Grain Sedimentation and Melt Convection Phenomena during Globular Solidification

    Wu, M., Ludwig, A. & Bührig-Polaczek, A., 2004, Solidification and Crystallization. p. 204-212

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  82. Published

    Chapter 5: Modeling the Spatial Phase Separation Process in Hypermonotectic Alloys

    Wu, M., Ludwig, A. & Ratke, L., 2004, Solidification and Crystallization. p. 34-43

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  83. Published

    Consecutive process and microstructure modelling for aluminium sheet production

    Neumann, L., Kopp, R., Ludwig, A., Wu, M., Bührig-Polaczek, A., Schneider, M. & Gottstein, G., 2004, In: Modelling and simulation in materials science and engineering. 12, p. 19-31

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram

    Ludwig, A. & Leibbrandt, S., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 540-546

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Modeling Macroscopic phase separation phenomena during solidification with an Eulerian multiphase approach

    Wu, M. & Ludwig, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 239-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Modeling of Free Surface and Thermo-Solutal Convection by a Three-Phase Model

    Wang, T., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 181-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Non-Equilibrium Globular Microstructure suitable for Semi-Solid Casting of Light Metal Alloys by Rapid-Slug-Cooling-Technology (RSCT

    Ludwig, A., Bührig-Polaczek, A. & Sahm, P., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 651-655

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    On convection induced phase separation during solidification

    Ludwig, A. & Wu, M., 2004, Multiphase Phenomena in Materials Processing. p. 93-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    On the interaction between macrosegregation, shrinkage flow and grain movement

    Ludwig, A., Wu, M. & Eck, S., 2004, Solidification processes and microstructures: A Symposium in honour of Wilfried Kurz. p. 99-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Simulation von Transportphänomenen bei der Erstarrung von Gussteilen: Vorhersage von Makroseigerungen und Korngrößenverteilung

    Ludwig, A., Wu, M. & Schumacher, P., 2004, In: Gießerei-Rundschau. 51, p. 212-218

    Research output: Contribution to journal › Article › Research › peer-review

  92. 2003
  93. Published

    Modeling of marangoni-induced droplet motion and melt convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 1 Jan 2003, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 34, 12, p. 3009-3019 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Simulation of time-dependent pool shape during laser spot welding: Transient effects

    Ehlen, G., Ludwig, A. & Sahm, P. R., 1 Jan 2003, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 34, 12, p. 2947-2961 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Cooperation within MEBSP on the Subject of Air Gap Formation during a Casting Process

    Kron, J., Bellet, M., Ludwig, A., Wendt, J., Pustal, B. & Fredrikson, H., 2003, In: Advanced engineering materials. 5, p. 78-79

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Grain evolution and macrosegregation in Al-4.0wt.%Cu casting: simulation and experimental evaluation

    Wu, M., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 261-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Influence of Convection and Grain Movement on Globular Equiaxed Solidification

    Wu, M., Ludwig, A., Bührig-Polaczek, A., Fehlbier, M. & Sahm, P. R., 2003, In: International journal of heat and mass transfer. 46, p. 2819-2832

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Influence of Phase-Transport Phenomena on Macrosegregation and Structure Formation during Solidification

    Wu, M. & Ludwig, A., 2003, In: Advanced engineering materials. 5, p. 62-66

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Macro- and Microscopic Coupled Numerical Simulation of Microsegregation during Diffusion Controlled Solidification of Multi-Component Alloys

    Ludwig, A., Sahm, P. & Pustal, B., 2003, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. p. 411-419

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Microstructure Control by Solidification Processing – Outcome from a European Thematic Network

    Lacaze, J., Greer, L., Howe, A., Ludwig, A. & Fredrikson, H., 2003, In: Advanced engineering materials. 5, p. 11-16

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Modeling of Marangoni Convection during Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. p. 755-769

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Modeling of Marangoni induced droplet motion and convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 34, p. 3009-3019

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Modeling the decomposition and phase separation during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Modelling the solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. 11, p. 755-769

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Multiphase simulation of transport phenomena during solidification processes

    Ludwig, A. & Wu, M., 2003, Modellbildung und Simulation in der Werkstoff-Schweiß- und Umformtechnik. p. 11-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Split-Solid-Model to Simulation the Formation of Shrinkage Cavities and Macrosegregation in Steel Casting

    Ehlen, G., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (533)