Andreas Ludwig

101 - 150 out of 533Page size: 50

Research output

  1. 2019
  2. Published

    Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019, p. 615-619.

    Research output: Contribution to conference › Paper › peer-review

  3. Published

    Physical and Numerical Modeling of Exposed Slag Eye in Continuous Casting Mold using Euler-Euler Approach

    Liu, Z., Li, B., Vakhrushev, A., Wu, M. & Ludwig, A., 2019, In: Steel research international. 90.2019, 4, 10 p., 1800117.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Using a numerical model to study the transient clogging phenomena in SEN during continuous casting of steel

    Wu, M., Barati, H., Kharicha, A. & Ludwig, A., 2019, p. 664-667.

    Research output: Contribution to conference › Paper › peer-review

  5. 2018
  6. Published

    Numerical Investigation of Collective Motion of Cathode Spots

    Kharicha, A., Karimi-Sibaki, E., Ludwig, A. & Wu, M., 15 Nov 2018, 28th International Symposium on Discharges and Electrical Insulation in Vacuum: ISDEIV. Institute of Electrical and Electronics Engineers, Vol. 2. p. 467-469 3 p. (International Symposium on Discharges and Elevtrical Insultaion in Vacuum, ISDEIV).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

    Liu, Z., Vakhrushev, A., Wu, M., Kharicha, A., Ludwig, A. & Li, B., 30 Oct 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 1, p. 543-554 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Macrosegregation Formation in an Al–Si Casting Sample with Cross-sectional Change During Directional Solidification

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 6 Oct 2018, In: Transactions of the Indian Institute of Metals. 71.2018, 11, p. 2639–2643 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Electro-vortical MHD Interface Instabilities

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., Oct 2018.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Modeling of the Twin-Roll Casting Process: Transition from Casting to Rolling

    Rodrigues, C., Ludwig, A., Kharicha, A. & Wu, M., 29 Sept 2018, In: Transactions of the Indian Institute of Metals. 71.2018, November, p. 2645-2649 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Contribution of an Electro-Vortex Flow to Primary, Secondary, and Tertiary Electric Current Distribution in an Electrolyte

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 7 Sept 2018, In: Journal of the Electrochemical Society. 165.2018, 11, p. E604-E615 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Investigation on the Binary Organic Components TRIS-NPG as Suitable Model Substances for Metal-Like Solidification

    Mogeritsch, J. & Ludwig, A., 2 Sept 2018, p. 330-335. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  13. Published

    Investigation on the Liquid Flow ahead of the Solidification Front During the Formation of Peritectic Layered Solidification Structure

    Mogeritsch, J., Pfeifer, T., Stefan-Kharicha, M. & Ludwig, A., 2 Sept 2018, p. 319-324. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake

    Liu, Z., Vakhrushev, A., Wu, M., Karimi-Sibaki, E., Kharicha, A., Ludwig, A. & Li, B., 4 Aug 2018, In: Metals : open access journal . 8.2018, 8, 14 p., 609.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment

    Zheng, Y., Wu, M., Karimi-Sibaki, E., Kharicha, A. & Ludwig, A., 1 Jul 2018, In: International journal of heat and mass transfer. 122.2018, July, p. 939-953 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Review of amonium chloride properties

    Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., 6 Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 63.2018, 9, p. 3170-3183 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Review of Ammonium Chloride–Water Solution Properties

    Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 2018, 9

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Premature melt solidification during mold filling and its influence on the as-cast structure

    Wu, M., Ahmadein, M. & Ludwig, A., 18 May 2018, In: Frontiers of Mechanical Engineering. 13.2018, March, p. 53-65 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M. & Karimi-Sibaki, E., 12 Mar 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 49.2018, 3, p. 1421-1433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Investigation on Peritectic Layered Structures by Using the Binary Organic Components TRIS-NPG as Model Substances for Metal-Like Solidification

    Mogeritsch, J. & Ludwig, A., 26 Feb 2018, In: Research & Development in Material Science. 4.2018, 1, p. 1-3 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification

    Stefan-Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 14 Feb 2018, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 5, p. 1708-1724 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    A transient model for nozzle clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2 Feb 2018, In: Powder Technology. 329.2018, 15 April, p. 181-198 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Simulation of Non-metallic Inclusion Deposition and Clogging of Nozzle

    Barati, H., Wu, M., Holzmann, T., Kharicha, A. & Ludwig, A., 13 Jan 2018, TMS 2018: CFD Modeling and Simulation in Materials Processing 2018 . p. 149-158 10 p. (Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Yield Strength Prediction in 3D During Local Heat Treatment of Structural A356 Alloy Components in Combination with Thermal-Stress Analysis

    Holzmann, T., Ludwig, A. & Raninger, P., 10 Jan 2018, TMS 2018: Materials Processing Fundamentals 2018. p. 77-85 9 p. (Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Numerical modeling of bubbly flow in continuous casting mold using two population balance approaches

    Liu, Z., Vakhrushev, A., Wu, M., Ludwig, A., Li, B. & Xu, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Liu, Z., Wu, M., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Review on Modeling and Simulation of Electroslag Remelting

    Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2018, In: Steel research international. 89.2018, 1, 20 p., 1700100.

    Research output: Contribution to journal › Review article › peer-review

  28. Published

    Simulation in metallurgy: Past achievements and future challenges

    Bohacek, J., Koutna, N., Ludwig, A., Rodrigues, C., Karimi-Sibaki, E. & Kharicha, A., 1 Jan 2018, 27th International Conference on Metallurgy and Materials, METAL 2018. p. 28-33 6 p. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Simulation of As-Cast Steel Ingots

    Wu, M., Ludwig, A. & Kharicha, A., 1 Jan 2018, In: Steel research international. 89.2018, 1, 14 p., 1700037.

    Research output: Contribution to journal › Review article › peer-review

  30. Published

    Concept of semi-continuous castin (SCC) for large steel strand: a numerical study.

    Wu, M., Zheng, Y., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    Discussion on possible solidification during SEN clogging in steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    "Influence of nucleation and drednrite fragmentation on as-cast structure of Sn-10.0wt.Pb benchmark.

    Zheng, Y., Kharicha, A. & Ludwig, A., 2018, p. 226. 231 p.

    Research output: Contribution to conference › Paper › peer-review

  33. Published

    Investigation on Mesh Sensitivity of a Transiet Model for Nozzle Clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018, p. 62. 66 p.

    Research output: Contribution to conference › Paper › peer-review

  34. Published

    Numerical modeling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  35. Published

    Numerical Modelling of Bubbly Flow in Continuous Casting Mold using Two Population Balance Approaches

    Liu, Z., Vakhrushev, A., Wu, M., Ludwig, J., Li, B., Xu, G. & Ludwig, A., 2018, p. 1. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Numerical simulation of fluid flow in the mushy zone under rotation magnetic field: Influence of Permeability

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  37. 2017
  38. E-pub ahead of print

    Incorporation of fragmentation into a volume average solidification model

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 5 Dec 2017, (E-pub ahead of print) In: Modelling and simulation in materials science and engineering. 26.2018, 1, 18 p., 015004.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A (non-)hydrostatic free-surface numerical model for two-layer flows

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Karimi-Sibaki, E., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 18 Apr 2017, In: Applied Mathematics and Computation. 319.2018, 15 February, p. 301-317 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Discussion on Modeling Capability for Macrosegregation

    Wu, M., Kharicha, A. & Ludwig, A., 15 Apr 2017, In: High temperature material processes. 36.2017, 5, p. 531-539 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Massive Formation of Equiaxed Crystals by Avalanches of Mushy Zone Segments

    Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 16 Mar 2017, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, p. 2927-2931 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In-situ observation of coupled peritectic growth in a binary organic model alloy

    Ludwig, A., Mogeritsch, J. & Pfeifer, T., 1 Mar 2017, In: Acta Materialia. 126.2017, March, p. 329-335 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Phase-field modelling of ternary eutetic solidification in hot dip galvanization

    Mogeritsch, J. P., Ludwig, A., Böttger, B., Angeli, G., Riener, C. K. & Ebner, R., 1 Jan 2017, Proceedings of the 7th International Conference on Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2017. Vol. 2017-January. p. 1171-1182 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”

    Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017

    Research output: Other contribution › Research

  45. Published

    A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot

    Wu, M., Ludwig, A. & Kharicha, A., 2017, In: Applied Mathematical Modelling. 41.2017, January, p. 102-120 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A Water Experiment Benchmark to Evaluate Numerical Models for the Motion of Particles in Continuous Casting Tundish

    Vakhrushev, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 2017, In: Steel research international. 88.2017, 1, 13 p., 1600276.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 503-507. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization

    Mogeritsch, J. & Ludwig, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization

    Mogeritsch, J. & Ludwig, A., 2017, International Center for Numerical Methods in Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Role of fragmentation in as-cast structure: numerical study and experimental validation

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, In: China Foundry. 14.2017, 5, p. 321-326 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, In: Steel research international. 88.2017, 5, 8 p., 170001.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 312-16. 6 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next
View graph of relations

Latest Research Output

View more (533)