Andreas Ludwig

1 - 100 out of 533Page size: 100

Research output

  1. 2024
  2. Published

    Interplay of flow stratification, segregation channels, and crystal dynamics in a solidifying aqueous ammonium chloride solution

    Ludwig, A., Siyahatshayesteh, G., Stefan-Kharicha, M., Wu, M. & Kharicha, A., 27 Dec 2024, In: International journal of heat and mass transfer. 240.2025, 1 May, 8 p., 126638.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Modelling freckles and spurious grain formation in directionally solidified superalloy castings

    Zhang, H., Zhao, Y., Xiong, W., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 19 Oct 2024, In: Communications materials. 2024, 5, 12 p., 232.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Explanation for the linear solid/liquid interface recoil observed during directional solidification of a TRIS-NPG alloy under microgravity conditions

    Ludwig, A., Mogeritsch, J. P., Barati, H., Wu, M. & Kharicha, A., 23 Jul 2024, In: Journal of crystal growth. 644.2024, 15 October, 8 p., 127824.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    CFD modelling of slag fuming, with focus on freeze-lining formation

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., Jun 2024, p. 839-846. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  6. Published

    On the conditions for the occurrence of crystal avalanches during alloy solidification

    Siyahatshayesteh, G., Ludwig, A., Stefan-Kharicha, M., Wu, M. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  7. E-pub ahead of print

    Assessment of URANS-Type Turbulent Flow Modelling of a Single Port Submerged Entry Nozzle (SEN) for Thin Slab Continuous Casting (TSC) Process

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 26 Feb 2024, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, April, p. 891-904 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Numerical modeling of clog fragmentation during SEN clogging in steel continuous casting

    Barati, H., Wu, M., Ilie, S., Kharicha, A. & Ludwig, A., 1 Feb 2024, In: Powder Technology. 434.2024, 1 February, 14 p., 119307.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Effect of Marangoni flow during the solidification of a Fe- 0.82wt.%C steel alloy

    Sari, I., Wu, M., Ludwig, A. & Kharicha, A., 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  10. 2023
  11. Published

    Microgravity studies of solidification patterns in model transparent alloys onboard the International Space Station

    Akamatsu, S., Bottin-Rousseau, S., Witusiewicz, V., Hecht, U., Plapp, M., Ludwig, A., Mogeritsch, J. P., Serefoglu, M., Bergeon, N., Mota, F. L., Sturz, L., Zimmermann, G., McFadden, S. & Sillekens, W., 18 Oct 2023, In: npj Microgravity. 2023, 9, 12 p., 83.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Observations of the occurrence and disappearance of peritectic couple growth performed under microgravity conditions

    Ludwig, A. & Mogeritsch, J. P., 4 Oct 2023, (E-pub ahead of print) In: Scripta Materialia. 239.2024, 15 January, 6 p., 115802.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    A multiphase model for exploring electrochemical Marangoni flow

    Karimi Sibaki, E., Vakhrushev, A., Kadylnykova, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 1 Sept 2023, In: Electrochemistry Communications. 155.2023, October, 6 p., 107567.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Transient Simulation of Diffusion-Limited Electrodeposition Using Volume of Fluid (VOF) Method

    Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 4 Jul 2023, In: Journal of the Electrochemical Society. 170.2023, 7, 7 p., 072501.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Solidification Principle in Large Vertical Steel Casting Under the EMS Effect

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., 19 May 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, August, p. 1078-1085 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    In Situ Study of Peritectic Couple Growth Under Purely Diffusive Conditions

    Ludwig, A. & Mogeritsch, J. P., 26 Apr 2023, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 11 Mar 2023, In: International journal of heat and mass transfer. 280.2023, July, 15 p., 124050.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Kharicha, A., 21 Feb 2023, In: Metals : open access journal . 13.2023, 3, 21 p., 444.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 21 Feb 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, April, p. 880-894 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Hypo-peritectic TRIS–NPG in a stationary temperature gradient: Thermodynamics, grain boundary migration and phase identification

    Ludwig, A., Mogeritsch, J. P. & Witusiewicz, V. T., 15 Feb 2023, In: Journal of crystal growth. 604.2023, 15 February, 9 p., 127052.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Novel strategy to model deformation-induced strand contraction/dilatation during mechanical reduction

    Guan, R., Rodrigues, C. M. G., Ji, C., Zhu, M., Li, S., Wu, M., Kharicha, A., Vakhrushev, A. & Ludwig, A., Feb 2023, In: Applied Mathematical Modelling. 114.2023, February, p. 770-784 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Digital twin for directional solidification of a single-crystal turbine blade

    Zhang, H., Liu, X., Ma, D., Song, M., Ludwig, A., Kharicha, A. & Wu, M., 1 Jan 2023, In: Acta Materialia. 244.2023, 1 January, 15 p., 118579.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Potential eutectic accumulation in single crystal turbine blade due to geometry effect: a numerical study

    Zhang, H. J., Liu, X. S., Ma, D. X., Ludwig, A., Kharicha, A. & Wu, M. H., 1 Jan 2023, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    ASSESMENT OF VOLUME OF FLUID METHODS TO MODEL ELECTROMAGNETIC BRAKE IN CONTINOUS CASTING MOLD USING OPENFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023. 1 p.

    Research output: Contribution to conference › Abstract

  25. Published

    Assessment of Volume of Fluid Methods to Model Electromagnetic Brake in Continuous Casting Mold Using OpenFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Continuum mixture solidification model for simulation of freeze lining in smelting furnace

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 2023. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Flow-enhanced remelting of settling/floating globular crystals during mixed columnar-equiaxed solidification

    Wu, M., Zhang, Z., Ludwig, A. & Kharicha, A., 2023. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Impact of external magnetic fields on the melt pool geometry in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M. & Ludwig, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Influence of external magnetic field on 3D electro vortex flow inside conducting liquids

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Influence of the adjustable EMBr on the asymmetric flow in a thin slab caster with a misaligned SEN

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., 2023. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    Influence of the rotational component of a submerged entry nozzle jet on the free surface oscillations under the applied DC magnetic field

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Modelling 3D Electro vortex Flow inside liquid metal and Effect of External Magnetic Fields on Flow Pattern

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Numerical study on the formation of spurious grains and freckles during the directional solidification of superalloys

    Zhang, Z., Wu, M., Liu, X., Song, M., Ludwig, A. & Kharicha, A., 2023. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  34. Published

    Observation of pertitectic couple growth for a hyper-peritectic alloy under microgravity conditions

    Ludwig, A. & Mogeritsch, J. P., 2023, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Conference article › peer-review

  35. Published

    On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 7 p., 012023.

    Research output: Contribution to journal › Conference article › peer-review

  36. Published

    Potential etutectic accumulation in single crytal turbine blade due to geometry effect: a numerical study

    Zhang, H., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 2023, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Conference article › peer-review

  37. Published

    Simulations of 3D Hydrogen Electric Arc and Effect of External Magnetic Field on Arc Flow Dynamics

    Al Nasser, M., Barati, H., Redl, H., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Transient simulation of melt flow, clogging, and clog fragmentation inside SEN during steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2023. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  39. 2022
  40. Published

    Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

    Karimi-Sibaki, E., Peyha, M., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J., Preiss, B. & Kharicha, A., Dec 2022, In: Scientific reports. 2022, 12, 14 p., 20405.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Dendrite fragmentation mechanism under forced convection condition by rotating magnetic field during unidirectional solidification of AlSi7 alloy

    Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., 28 Sept 2022, (E-pub ahead of print) In: Acta Materialia. 241.2022, December, 14 p., 118391.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Experimental Evaluation of MHD Modeling of EMS During Continuous Casting

    Zhang, H., Wu, M., Zhang, Z., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., Aug 2022, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 53.2022, 4, p. 2166-2181 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Tornados and cyclones driven by Magneto-hydrodynamic forces

    Kharicha, A., Al-Nasser, M., Barati, H., Karimi-Sibaki, E., Vakhrushev, A., Abdi, M., Ludwig, A. & Wu, M., 1 Jul 2022, In: European Journal of Mechanics - B/Fluids. 94.2022, July-August, p. 90-105 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    The Role of Mold Electromagnetic Stirring in the Dissipation of Superheat during the Continuous Casting of Billets

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 29 Jun 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 10, 14 p., 2200065.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Validation of a capillary-driven fragmentation model during mixed columnar-equiaxed solidification with melt convection and grain transport

    Rodrigues, C. M. G., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., Jun 2022, In: Materialia. 23.2022, June, 12 p., 101462.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Numerical modeling and experimental validation of the effect of arc distribution on the as-solidified Ti64 ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Abdi, M., Wu, M., Ludwig, A., Bohacek, J. & Preiß, B., 11 May 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 19.2022, July-August, p. 183-193 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Modeling Asymmetric Flow in the Thin-Slab Casting Mold Under Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., May 2022, In: Steel research international. 93.2022, 5, 11 p., 2200088.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Rodrigues, C. M. G., 23 Mar 2022, In: Journal of iron and steel research international. 29.2022, 1, p. 88-102 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    On/off directional solidification of near peritectic TRIS-NPG with a planar but tilted solid/liquid interface under microgravity conditions.

    Ludwig, A., Mogeritsch, J. & Rettenmayr, M., 22 Mar 2022, (E-pub ahead of print) In: Scripta materialia. 214.2022, June, 6 p., 114683.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., Mar 2022, In: Journal of materials processing technology. 301.2022, March, 15 p., 117434.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Hydrodynamically driven facet kinetics in crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 31 Jan 2022, (E-pub ahead of print) In: Journal of crystal growth. 584.2022, 15 April, 8 p., 126557.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    In Situ Observation of Coupled Growth Morphologies in Organic Peritectics Under Pure Diffusion Conditions

    Mogeritsch, J. P., Sillekens, W. & Ludwig, A., 2022, TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. 2021
  54. Published

    Reverse flows and flattening of a submerged jet under the action of a transverse magnetic field

    Kharicha, A., Vakhrushev, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 9 Dec 2021, In: Physical review research. 6.2021, 12, 123701.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Investigation of effect of electrode polarity on electrochemistry and magnetohydrodynamicsusing tertiary curent distribution in electroslag remelting process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 6 Dec 2021, In: Journal of iron and steel research international. 28.2021, December, p. 1551-1561 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Mathematical Modeling of the Early Stage of Clogging of the SEN During Continuous Casting of Ti-ULC Steel

    Barati, H., Wu, M., Michelic, S., Ilie, S., Kharicha, A., Ludwig, A. & Kang, Y. B., 20 Oct 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 6, p. 4167-4178 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Abdi, M., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., Oct 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 5, p. 3354-3362 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Toward a Simplified Arc Impingement Model in a Direct-Current Electric Arc Furnace

    Al-Nasser, M., Kharicha, A., Barati, H., Pichler, C., Hackl, G., Gruber, M., Ishmurzin, A., Redl, C., Wu, M. & Ludwig, A., 17 Sept 2021, In: Metals. 11.2021, 9, 17 p., 1482.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Schumacher, P., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., Sept 2021, In: Applied Mathematical Modelling. 97.2021, September, p. 821-838 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Bohacek, J., 31 Aug 2021, In: Metals. 11.2021, 9, 20 p., 1375.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Bridging Capillary-Driven Fragmentation and Grain Transport with Mixed Columnar-EquiaxedSolidification

    Gomes Rodrigues, C., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 12 Aug 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, October, p. 4609–4622 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Eckert, S., 6 Jul 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 3193-3207 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., 10 May 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, July, p. 3007-3022 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 57.2021, 4, p. 1697-1705 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Important Key Process Simulations in the Field of Steel Metallurgy

    Ludwig, A., Gomes Rodrigues, C., Zhang, Z., Zhang, H., Karimi Sibaki, E., Barati, H., Vakhrushev, A., Al Nasser, M., Wu, M. & Kharicha, A., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 1, p. 2-9 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS

    Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. 2020
  68. Published

    Two-phase vicoplastic model for the simulation of twin roll casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 1 Dec 2020, In: Journal of materials processing technology. 286.2020, December, 9 p., 116814.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Flow-solidification interaction: A numerical study on solidification of NH4Cl – 70 wt.%H2O solution in a water-cooled mould with a large sample thickness

    Wu, M., Stefan-Kharicha, M., Kharicha, A. & Ludwig, A., 15 Oct 2020, In: International journal of heat and mass transfer. 164.2021, January, 120566.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Numerical Simulation of Heat Treatment of Ti-6AI-4V by using a Phase-Field Method Based Software.

    Mogeritsch, J., Panzl, G., Watzl, A. & Ludwig, A., 2 Oct 2020. 11 p.

    Research output: Contribution to conference › Paper

  71. Published

    Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy

    Zhang, H., Wu, M., Tewari, S. N., Ludwig, A. & Kharicha, A., 24 Sept 2020, In: Journal of materials processing technology. 288.2021, February, 12 p., 116913.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Impact of hydrodynamics on growth and morphology of faceted crystals

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 1 Jul 2020, In: Journal of crystal growth. 541.2020, 1 July, 11 p., 125667.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Modeling mixed columnar-equiaxed solidification of Sn-10wt%Pb alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M., Zhang, H., Karimi-Sibaki, E., Ludwig, A. & Kharicha, A., 12 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 012024.

    Research output: Contribution to journal › Conference article › peer-review

  76. Published

    Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation

    Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  77. Published

    Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition

    Zhang, H., Wu, M. (Co-editor), Zhang, Z. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  78. Published

    Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M. (Co-editor), Zhang, H. (Co-editor), Karimi Sibaki, E. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng. . Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  79. Published

    Modelling of shear bands during solidification

    Ludwig, A., Gomes Rodrigues, C. (Co-editor), Wu, M. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci.Eng. . online, Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  80. Published

    Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting

    Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  81. Published

    A 2D Multiphase Model of Drop Behavior during Electroslag Remelting

    Chaulet, J., Kharicha, A., Charmond, S., Dussoubs, B., Hans, S., Wu, M., Ludwig, A. & Jardy, A., 8 Apr 2020, In: Metals. 10.2020, 4, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 1 Mar 2020, In: Materials Today Communications. 22.2020, March, 9 p., 100842.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Investigation of Peritectic Solidification Morphologies by Using the Binary Organic Model System TRIS-NPG

    Mogeritsch, J., Abdi, M. & Ludwig, A., 21 Feb 2020, In: Materials. 13.2020, 4, 16 p., 966.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    A Numerical Investigation on the Electrochemical Behavior of CaO and Al2O3 in the ESR Slags

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 20 Feb 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 3, p. 871-879 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    A volume of fluid (VOF) method to model shape change during electrodeposition

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 31 Jan 2020, (E-pub ahead of print) In: Electrochemistry Communications. 112.2020, 106675.

    Research output: Contribution to journal › Article › Research › peer-review

  86. 2019
  87. E-pub ahead of print

    A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 29 Oct 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 1, p. 222-235 p 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    A Dynamic Mesh Method to Model Shape Change during Electrodeposition

    Karimi-Sibaki, E., Kharicha, A., Abdi, M., Wu, M., Ludwig, A. & Bohacek, J., 31 Jul 2019, In: Journal of the Electrochemical Society. 166.2019, 12, p. D521-D529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Calibration of Numerical and Determination of Physical Parameters for the Organic Model System TRIS-NPG

    Mogeritsch, J., Böttger, B. & Ludwig, A., 23 Jul 2019, p. 2-7.

    Research output: Contribution to conference › Paper

  90. Published

    Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet

    Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., Jul 2019.

    Research output: Contribution to conference › Paper

  91. Published

    Formation of micro-plumes at a planar solid/liquid interface in a temperature gradient

    Mogeritsch, J., Pfeifer, T. & Ludwig, A., 19 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  92. Published

    Interaction between flow and faceted crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Wu, M., Ludwig, A., Mogeritsch, J., Reiss, G. & Eßl, W., 19 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  93. Published

    Efficient model for the prediction of dendritic grain growth using the lattice Boltzmann method coupled with a cellular automaton algorithm

    Jäger, S. & Ludwig, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012028.

    Research output: Contribution to journal › Conference article › peer-review

  94. Published

    On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

    Research output: Contribution to journal › Conference article › peer-review

  95. Published

    On the Modelling of Macrosegregation during Twin-Roll Casting

    Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 p., 012041.

    Research output: Contribution to journal › Conference article › peer-review

  96. Published

    A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 15 Jun 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1334-1350 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. E-pub ahead of print

    A GPU solver for symmetric positive-definite matrices vs. traditional codes

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Holzmann, T. & Karimi-Sibaki, E., 7 Mar 2019, (E-pub ahead of print) In: Computers and mathematics with applications. 79.2019, 9, p. 2933-2943 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification

    Wu, M., Ludwig, A. & Kharicha, A., Feb 2019, In: Metals : open access journal . 9.2019, 2, 229.

    Research output: Contribution to journal › Review article › peer-review

  99. Published

    An Experimental Benchmark of Non-metallic Inclusion Distribution Inside a Heavy Continuous-Casting Slab

    Liu, Z., Li, B., Wu, M., Xu, G., Ruan, X. & Ludwig, A., 2 Jan 2019, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 3, p. 1370-1379 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1429-1443 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Formation of micro-plumes at a planar solid liquid interface in a temperature gradient

    Mogeritsch, J., Pfeifer, T. & Ludwig, A., 2019.

    Research output: Contribution to conference › Paper

  102. Published

    Investigations on Collective Motion of Cathode Spots in the VAR Process

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2019, p. 11-16.

    Research output: Contribution to conference › Paper › peer-review

  103. Published

    Modeling Electrochemical Transport of Ions in the ESR Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2019, p. 131-138.

    Research output: Contribution to conference › Paper › peer-review

  104. Published

    Numerical Investigation of the Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Bohacek, J., Holzgruber, H., Ofner, B., Scheriau, A. & Kubin, M., 2019, p. 55-62.

    Research output: Contribution to conference › Paper › peer-review

  105. Published

    On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold

    Vakhrushev, A., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019.

    Research output: Contribution to conference › Paper › peer-review

  106. Published

    On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold.

    Vakhrushev, A., Kharicha, A., Ludwig, A., Tang, Y., Hackl, G., Watzinger, J. & Gomes Rodrigues, C., 2019.

    Research output: Contribution to conference › Paper › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (533)