Alexander Vakhrushev

1 - 82 out of 82Page size: 100

Research output

  1. 2024
  2. Published

    A Coupled Magnetohydrodynamics (MHD) and Thermal Stress-Strain Model to Explore the Impact of Gas Cooling on Ingot Solidification Shrinkage in Vacuum Arc Remelting (VAR) Process

    Bohacek, J., Karimi Sibaki, E., Vakhrushev, A., Mraz, K., Hvozda, J., Wu, M. & Kharicha, A., 4 Sept 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, December, p. 4408-4417 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A numerical study on the solidification shrinkage of the ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M. & Bohacek, J., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  4. Published

    A numerical study on the solidification shrinkage of the ingot in vacuum arc remelting (VAR) process

    Mraz, K., Bohacek, J., Karimi Sibaki, E., Vakhrushev, A., Wu, M. & Kharicha, A., Sept 2024. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Magnetohydrodynamics phenomene in continuous casting process under applied electromagnetic braking (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  6. Published

    On Modelling Electromagnetic Braking in Thin Slab Continuous Casting: fundamentals, applications and outlooks

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Comment on “Numerical study with OpenFOAM on heat conduction problems in heterogeneous media” by K. Zhang, C.-A. Wang, J.-Y. Tan, International Journal of Heat and Mass Transfer, Vol. 124 (2018) 1156–1162

    Bohacek, J., Mraz, K., Hvozda, J., Lang, F., Karimi Sibaki, E., Vakhrushev, A. & Kharicha, A., 1 Aug 2024, In: International journal of heat and mass transfer. 227.2024, 1 August, 3 p., 125603.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    A numerical study on effects of current density distribution, turbulence, and magnetohydrodynamics (MHD) on electrolytic gas flow with application to alkaline water electrolysis (AWE)

    Karimi Sibaki, E., Vakhrushev, A., Wu, M., Bohacek, J. & Kharicha, A., 20 Jul 2024, In: Chemical Engineering Research and Design. 208.2024, August, p. 731-739 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Determination of transient heat transfer by cooling channel in high-pressure die casting using inverse method

    Bohacek, J., Mraz, K., Hvozda, J., Lang, F., Raudensky, M., Vakhrushev, A., Karimi Sibaki, E. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting mold under the applied electromagnetic brake

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting (TSC) mold under the applied electromagnetic brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    Case study on thermal management of planar elements with various polymeric heat exchangers: experiment and simulation

    Hvozda, J., Mraz, K., Raudensky, M., Vakhrushev, A., Karimi Sibaki, E. & Bohacek, J., 2 May 2024, In: Journal of Thermal Analysis and Calorimetry. 149.2024, June, p. 5229-5238 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Exploring Extreme Voltage Events in Hydrogen Arcs within Electric Arc Furnaces

    Al Nasser, M., Alrasheedi, N., Karimi Sibaki, E., Vakhrushev, A., Ahmadein, M., Ataya, S. & Kharicha, A., 28 Mar 2024, In: Sustainability. 16.2024, 7, 17 p., 2831.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Assessment of URANS-Type Turbulent Flow Modelling of a Single Port Submerged Entry Nozzle (SEN) for Thin Slab Continuous Casting (TSC) Process

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 26 Feb 2024, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, April, p. 891-904 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2023
  16. Published

    Experimental and Numerical Investigations into Heat Transfer Using a Jet Cooler in High-Pressure Die Casting

    Bohacek, J., Mraz, K., Krutis, V., Kana, V., Vakhrushev, A., Karimi Sibaki, E. & Kharicha, A., 28 Nov 2023, In: Journal of Manufacturing and Materials Processing. 7.2023, 6, 14 p., 212.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A multiphase model for exploring electrochemical Marangoni flow

    Karimi Sibaki, E., Vakhrushev, A., Kadylnykova, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 1 Sept 2023, In: Electrochemistry Communications. 155.2023, October, 6 p., 107567.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Transient Simulation of Diffusion-Limited Electrodeposition Using Volume of Fluid (VOF) Method

    Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 4 Jul 2023, In: Journal of the Electrochemical Society. 170.2023, 7, 7 p., 072501.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Kharicha, A., 21 Feb 2023, In: Metals : open access journal . 13.2023, 3, 21 p., 444.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Novel strategy to model deformation-induced strand contraction/dilatation during mechanical reduction

    Guan, R., Rodrigues, C. M. G., Ji, C., Zhu, M., Li, S., Wu, M., Kharicha, A., Vakhrushev, A. & Ludwig, A., Feb 2023, In: Applied Mathematical Modelling. 114.2023, February, p. 770-784 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    ASSESMENT OF VOLUME OF FLUID METHODS TO MODEL ELECTROMAGNETIC BRAKE IN CONTINOUS CASTING MOLD USING OPENFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023. 1 p.

    Research output: Contribution to conference › Abstract

  22. Published

    Assessment of Volume of Fluid Methods to Model Electromagnetic Brake in Continuous Casting Mold Using OpenFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Fluid flow and heat transfer in a liquid metal film under applied transversal magnetic field

    Al Nasser, M., Vakhrushev, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Impact of external magnetic fields on the melt pool geometry in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M. & Ludwig, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Influence of the adjustable EMBr on the asymmetric flow in a thin slab caster with a misaligned SEN

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., 2023. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  26. Published

    Influence of the rotational component of a submerged entry nozzle jet on the free surface oscillations under the applied DC magnetic field

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 7 p., 012023.

    Research output: Contribution to journal › Conference article › peer-review

  28. 2022
  29. Published

    Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

    Karimi-Sibaki, E., Peyha, M., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J., Preiss, B. & Kharicha, A., Dec 2022, In: Scientific reports. 2022, 12, 14 p., 20405.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Tornados and cyclones driven by Magneto-hydrodynamic forces

    Kharicha, A., Al-Nasser, M., Barati, H., Karimi-Sibaki, E., Vakhrushev, A., Abdi, M., Ludwig, A. & Wu, M., 1 Jul 2022, In: European Journal of Mechanics - B/Fluids. 94.2022, July-August, p. 90-105 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Numerical modeling and experimental validation of the effect of arc distribution on the as-solidified Ti64 ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Abdi, M., Wu, M., Ludwig, A., Bohacek, J. & Preiß, B., 11 May 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 19.2022, July-August, p. 183-193 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Modeling Asymmetric Flow in the Thin-Slab Casting Mold Under Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., May 2022, In: Steel research international. 93.2022, 5, 11 p., 2200088.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Rodrigues, C. M. G., 23 Mar 2022, In: Journal of iron and steel research international. 29.2022, 1, p. 88-102 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    A Sequential Inverse Heat Conduction Problem in OpenFOAM

    Bohacek, J., Kominek, J., Vakhrushev, A., Karimi Sibaki, E. & Lee, T. W., 2022, In: Open Foam Journal. 1.2021, 1, p. 27-46 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2021
  36. Published

    Reverse flows and flattening of a submerged jet under the action of a transverse magnetic field

    Kharicha, A., Vakhrushev, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 9 Dec 2021, In: Physical review research. 6.2021, 12, 123701.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation of effect of electrode polarity on electrochemistry and magnetohydrodynamicsusing tertiary curent distribution in electroslag remelting process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 6 Dec 2021, In: Journal of iron and steel research international. 28.2021, December, p. 1551-1561 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Abdi, M., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., Oct 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 5, p. 3354-3362 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Bohacek, J., 31 Aug 2021, In: Metals. 11.2021, 9, 20 p., 1375.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Eckert, S., 6 Jul 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 3193-3207 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 57.2021, 4, p. 1697-1705 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Adsorption of Cholesterol by Carbon Nanotubes

    Vakhrushev, A. (Illustrator), 2021

    Research output: Book/Report › Book › Research

  43. Published

    Important Key Process Simulations in the Field of Steel Metallurgy

    Ludwig, A., Gomes Rodrigues, C., Zhang, Z., Zhang, H., Karimi Sibaki, E., Barati, H., Vakhrushev, A., Al Nasser, M., Wu, M. & Kharicha, A., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 1, p. 2-9 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2020
  45. Published

    Two-phase vicoplastic model for the simulation of twin roll casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 1 Dec 2020, In: Journal of materials processing technology. 286.2020, December, 9 p., 116814.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation

    Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  48. Published

    Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting

    Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  49. E-pub ahead of print

    A volume of fluid (VOF) method to model shape change during electrodeposition

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 31 Jan 2020, (E-pub ahead of print) In: Electrochemistry Communications. 112.2020, 106675.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2019
  51. Published

    On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

    Research output: Contribution to journal › Conference article › peer-review

  52. Published

    On the Modelling of Macrosegregation during Twin-Roll Casting

    Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 p., 012041.

    Research output: Contribution to journal › Conference article › peer-review

  53. Published

    A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 15 Jun 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1334-1350 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold

    Vakhrushev, A., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019.

    Research output: Contribution to conference › Paper › peer-review

  55. Published

    On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold.

    Vakhrushev, A., Kharicha, A., Ludwig, A., Tang, Y., Hackl, G., Watzinger, J. & Gomes Rodrigues, C., 2019.

    Research output: Contribution to conference › Paper › peer-review

  56. Published

    Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019, p. 615-619.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Physical and Numerical Modeling of Exposed Slag Eye in Continuous Casting Mold using Euler-Euler Approach

    Liu, Z., Li, B., Vakhrushev, A., Wu, M. & Ludwig, A., 2019, In: Steel research international. 90.2019, 4, 10 p., 1800117.

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2018
  59. Published

    Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

    Liu, Z., Vakhrushev, A., Wu, M., Kharicha, A., Ludwig, A. & Li, B., 30 Oct 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 1, p. 543-554 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake

    Liu, Z., Vakhrushev, A., Wu, M., Karimi-Sibaki, E., Kharicha, A., Ludwig, A. & Li, B., 4 Aug 2018, In: Metals : open access journal . 8.2018, 8, 14 p., 609.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Numerical modeling of bubbly flow in continuous casting mold using two population balance approaches

    Liu, Z., Vakhrushev, A., Wu, M., Ludwig, A., Li, B. & Xu, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Numerical modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Liu, Z., Wu, M., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Numerical modeling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  64. Published

    Numerical Modelling of Bubbly Flow in Continuous Casting Mold using Two Population Balance Approaches

    Liu, Z., Vakhrushev, A., Wu, M., Ludwig, J., Li, B., Xu, G. & Ludwig, A., 2018, p. 1. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  65. 2017
  66. Published

    A Water Experiment Benchmark to Evaluate Numerical Models for the Motion of Particles in Continuous Casting Tundish

    Vakhrushev, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 2017, In: Steel research international. 88.2017, 1, 13 p., 1600276.

    Research output: Contribution to journal › Article › Research › peer-review

  67. 2016
  68. Published

    Influence of forced convection on solidification and remelting in the developing mushy zone

    Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  69. 2015
  70. Published

    Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones

    Ludwig, A., Vakhrushev, A., Wu, M., Holzmann, T. & Kharicha, A., 25 Sept 2015, In: Transactions of the Indian Institute of Metals. 68, 6, p. 1087-1094 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2014
  73. Published

    Numerical Investigation of Shell Formation in Thin Slab Casting of Funnel-Type Mold

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 20 Feb 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45.2014, 3, p. 1024-1037 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Advanced Process Simulation of Solidification and Melting

    Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.

    Research output: Contribution to journal › Article › Research

  75. Published

    Annual report of CD-Lab activity during 2014, Project progress and achievements.

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  76. Published

    "Experimental verification of the 3-phase continuous casting simulation using a water model"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2014, 8th European Continuous Casting Conf. on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. 2013
  78. Published

    "Discrete Phase Modelling for Continuous Casting: Model Verification and Application"

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2013, "Discrete Phase Modelling for Continuous Casting: Model Verification and Application".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Exploration of the double-diffusive convection during dendritic solidification with a combined volume-averaging and cellular-automaton model

    Stefan-Kharicha, M., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    "Minutes of the autumn meeting on project "Importance of Hydrodynamics In Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Minutes of the spring meeting on project "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Minutes of the winter meeting on project "Importance of Hydrodynamics in PEritectic Steek Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  83. Published

    Modeling of the flow-solidification interaction in thin slab casting

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    "Modelling and Simulation of Thin-Slap Casting"

    Vakhrushev, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Numerical investigation of shell formation in thin slab casting of funnel-type mould

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    "Simulation of the beam blank casting. A new SEN type for the thin slab casting"

    Vakhrushev, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Simulation results report "Simulation of the beam blank casting" for RHI "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"

    Vakhrushev, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer

  88. 2012
  89. Published

    Advanced Multiphase Modeling of Solidification with OpenFOAM®

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Hackl, G. & Nitzl, G., 2012, Open Source CFD International Conference 2012. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul I

    Vakhrushev, A., Wu, M. & Ludwig, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. 2011
  92. Published

    Coupling the turbulent flow with the solidification processes in OpenFOAM®

    Wu, M., Ludwig, A., Vakhrushev, A., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of Open Source CFD Int. Conf. 2011. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Modeling of Heat Transfer and Solidification Processes in Thin Slab Caster

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, European Continous Casting Conference ECCC 2011. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Modeling of nonmetallic inclusions and gas bubbles motion in continuous caster

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 17.1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. 2010
  96. Published

    Importance of Melt Flow in Solidifying Mushy Zone

    Wu, M., Vakhrushev, A., Nunner, G., Pfeiler, C., Kharicha, A. & Ludwig, A., 2010, In: The open transport phenomena journal . 5, 2, p. 16-23

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Modeling of Turbulent Melt Flow and Solidification Processes in Steel Continuous Caster with the Open Source Software Package OpenFOAM

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2010, Open Source CFD Int. Conf. 2010.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact

Phone: 3125

Latest Research Output

View more (82)