Albert Kneißl

1 - 50 out of 61Page size: 50

Research output

  1. 2012
  2. Published

    58. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor), Clemens, H. (Editor) & Kneißl, A. (Editor), 2012, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  3. Published

    Microstructural investigation of melt-spun NiTi based ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 544-555

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2011
  5. Published

    57. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  6. Published

    Characterization of oxidation resistance of stainless steels at high temperature by metallographic examinations and in-situ electrical resistance measurements

    Bruncko, M., Mehrabi, K., Rudolf, R., Kolar, D., Kneißl, A. & Anzel, I., 2011, Fortschritte in der Metallographie. p. 267-272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Electrochemical and microstructural study of Cu-Al-Ni shape memory alloy

    Gojic, M., Vrsalovic, L., Kozuh, S., Kneißl, A., Anzel, I., Gudic, S., Kosec, B. & Kliskic, M., 2011, In: Journal of alloys and compounds. 509, p. 9783-9790

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Microstructural Changes during Vacuum Carburizing of Steels

    Bruncko, M., Anzel, I. & Kneißl, A., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 398-407

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Microstructural investigation of melt-spun NiTi-based ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2011, Fortschritte in der Metallographie. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Tracing the growth rate changes during vertical directional solidification by electrical resistance measurements

    Bruncko, M., Kneißl, A. & Anzel, I., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 25-31

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2010
  12. Published

    56. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2010, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  13. Published

    Chemistry of corrosion products on Zn-Al-Mg alloy coated steel

    Schürz, S., Luckeneder, G. H., Fleischanderl, M., Mack, P., Gsaller, H., Kneißl, A. & Mori, G., 2010, In: Corrosion science. 52, p. 3271-3279

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Fortschritte in der Metallographie 42. 2010

    Kneißl, A. (Co-editor) & Clemens, H. (Co-editor), 2010, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  15. Published

    Microstructural changes during vacuum carburizing of steel

    Bruncko, M., Kneißl, A. & Anzel, I., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 303-308

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Microstructure of Melt Spun Ni-Ti Shape Memory Ribbons

    Mehrabi, K., Rudolf, R., Bruncko, M., Kneißl, A., Colic, M., Romcevic, N. & Anzel, I., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    The influence of alloying elements on the microstructure and properties of NiTi shape memory ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 63-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Thermal stability and recrystallization of cold deformed Au-0,5La alloy

    Kusic, B., Rudolf, R., Kneißl, A. & Anzel, I., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 51-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Titel: International journal of immunological studies

    Rudolf, R., Mehrabi, K., Kneißl, A., Bruncko, M., Anzel, I., Tomic, S., Dzopalic, T. & Colic, M., 2010, In: International journal of immunological studies. 1, 2, p. 214-228

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2009
  21. Published

    55. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2009, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  22. Published

    Characterization and properties of niTi(W) and cuAlNi shape memory alloys

    Kneißl, A., Mehrabi, K., Bruncko, M., McKay, B. & Uhlenhaut, D., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1038-1045

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Characterization of high-temperature oxidation of metallic materials by in-situ electrical resistance measurements

    Bruncko, M., Kneißl, A. & Anzel, I., 2009, Prakt. Met. Sonderband 41. p. 311-316

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Corrosion behaviour of Zn-Al-Mg coated steel sheet in sodium chloride-containing environment

    Schürz, S., Fleischanderl, M., Luckeneder, G. H., Preis, C., Haunschmied, T., Mori, G. & Kneißl, A., 2009, In: Corrosion science. p. 2355-2363

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of thermomechanical training on the transformation temperatures and properties of NiTi melt-spun ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2009, The 8th European Symposium on Martensitic Transformations. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Effect of Thermomechanical Training on the Transformation Temperatures and Properties of NiTi Melt-spun Ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Influence of Quenching Rates on Equiatomic NiTi Ribbons Fabricated by Melt-Spinning

    Mehrabi, K., Bruncko, M., McKay, B. & Kneißl, A., 2009, In: Journal of Materials Engineering and Performance. p. 475-479

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Internal oxidation of metastable metallic materials

    Anzel, I. & Kneißl, A., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1059-1065

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Low pressure vacuum carburizing of steels

    Bruncko, M., Kneißl, A. & Anzel, I., 2009, New Challenges in heat treatment and surface engineering. p. 171-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    The Properties of the shape memory alloys CuAlNi after continuous casting

    Gojic, M., Matkovic, P., Matkovic, T., Kneißl, A., Anzel, I., Lojen, G., Bizjak, M. & Kosec, B., 2009, 9th International Foundrymen Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Thermal Stability of a Rapidly Solidified Cu-Zr

    Anzel, I., Kneißl, A., Rudolf, R. & Krizman, A., 2009, In: Practical metallography = Praktische Metallographie. 46, p. 657-669

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermomechanical training and microstructure of NiTi melt-spun ribbons

    Mehrabi, K., Bruncko, M., Härtel, M. & Kneißl, A., 2009, Prakt. Met. Sonderband 41. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. 2008
  34. Published

    54. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2008, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  35. Published

    Influence of chemical composition and manufacturing conditions on properties of NiTi shape memory alloys

    Mehrabi, K., Bahmanpour, H., Shokuhfar, A. & Kneißl, A., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, p. 693-696

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    In-situ monitoring of vacuum carburizing

    Bruncko, M., Kneißl, A. & Anzel, I., 2008, Material and Technology. p. 26-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Microstructures and properties of NiTi ribbons in different conditions of melt-spinning process

    Mehrabi, K., Bruncko, M., McKay, B. & Kneißl, A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Microstrucutre and properties of NiTi and CuAlNi shape memory alloys

    Kneißl, A., Unterweger, E., Bruncko, M., Lojen, G., Mehrabi, K. & Scherngell, H., 2008, In: Metalurgija = Journal of metallurgy. p. 90-100

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Microstrukture and properties of rapidly solidified NiTi shape memory alloys

    Mehrabi, K., Bruncko, M., McKay, B., Uhlenhaut, D. & Kneißl, A., 2008, Sonderbände der Praktischen Metallographie. p. 209-214

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Rapidly solidified Copper alloys ribbons

    Suler, M., Kosec, B., Kneißl, A., Bizjak, M., Raic, K., Bruncko, M. & Anzel, I., 2008, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 1, p. 67-74

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Thermal Stability of a rapidly solidified Cu-Zr Alloy

    Anzel, I., Kneißl, A., Rudolf, R. & Krizman, A., 2008, Sonderbände der praktischen Metallographie. p. 233-240

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. 2007
  43. Published

    53. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2007, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  44. Published

    Characterization of Cu-Al-Ni melt-spun ribbons using a focussed ion beam (FIB)

    Zupanic, F., Unterweger, E., Kneißl, A., Anzel, I. & Lojen, G., 2007, In: Materials and geoenvironment. 54, p. 319-329

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    CuAlNi Shape Memory Alloys

    Lojen, G., Kneißl, A. & Anzel, I., 2007, In: IRT 3000. 6, p. 81-86

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Gefügeänderungen während der inneren Oxidation einer Ag-Sn-Legierung

    Bruncko, M., Kneißl, A. & Anzel, I., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 464-475

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Identification of liquid/solid transformations in eutectic Pb-Sn-alloy

    Bruncko, M., Kneißl, A., Kosec, B., Lojen, G. & Anzel, I., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 112-116

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    In-situ monitoring of intenal oxidation of dilute alloys

    Bruncko, M., Anzel, I. & Kneißl, A., 2007, In: Corrosion science. 49, p. 1228-1244

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Internal oxidation of Cu thin surface layer

    Anzel, I., Kneißl, A. & Rudolf, R., 2007, Sonderbände der Praktischen Metallographie 39. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2006
  51. Published

    52. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2006, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  52. Published

    Application of FIB for Metallographic Preparation of Cu-Al-Ni Melt-Spun Ribbons

    Zupanic, F., Unterweger, E., Kneißl, A., Anzel, I. & Lojen, G., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 161-168

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Ätztechniken für die Phasencharakterisierung von niedriglegierten Dual-Phasen- und TRIP-Stählen

    Angeli, J., Füreder, E., Panholzer, M. & Kneißl, A., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 489-504

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Characterisation of Cu-Al-Ni Melt-Spun Ribbons after different thermal and mechanical treatments

    Unterweger, E., Lojen, G., Kneißl, A., Anzel, I., Kosec, B. & Bizjak, M., 2006, International Conference on Shape Memory and Superelastic Technologies. ASM, p. 345-350

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Controlling the Internal Oxidation Process by Electrical Resistance Measurements

    Bruncko, M., Anzel, I. & Kneißl, A., 2006, International Federation for Heat Treatment and Surface Engineering Congress 2006. ASMET, p. 66-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Fortschritte in der Metallographie 38

    Kneißl, A. (Editor), 2006, Frankfurt: Werkstoff-Informationsges.

    Research output: Book/Report › Anthology › Research

  57. Published

    Functional Properties of Wires and Thin Ribbons of Several Shape Memory Alloys

    Kneißl, A., Unterweger, E. & Lojen, G., 2006, In: Advanced engineering materials. 8, p. 1113-1118

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (61)