Abdellah Kharicha

81 - 100 out of 305Page size: 20

Research output

  1. 2021
  2. Published

    Reverse flows and flattening of a submerged jet under the action of a transverse magnetic field

    Kharicha, A., Vakhrushev, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 9 Dec 2021, In: Physical review research. 6.2021, 12, 123701.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Investigation of effect of electrode polarity on electrochemistry and magnetohydrodynamicsusing tertiary curent distribution in electroslag remelting process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 6 Dec 2021, In: Journal of iron and steel research international. 28.2021, December, p. 1551-1561 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Mathematical Modeling of the Early Stage of Clogging of the SEN During Continuous Casting of Ti-ULC Steel

    Barati, H., Wu, M., Michelic, S., Ilie, S., Kharicha, A., Ludwig, A. & Kang, Y. B., 20 Oct 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 6, p. 4167-4178 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Abdi, M., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., Oct 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 5, p. 3354-3362 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Toward a Simplified Arc Impingement Model in a Direct-Current Electric Arc Furnace

    Al-Nasser, M., Kharicha, A., Barati, H., Pichler, C., Hackl, G., Gruber, M., Ishmurzin, A., Redl, C., Wu, M. & Ludwig, A., 17 Sept 2021, In: Metals. 11.2021, 9, 17 p., 1482.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Schumacher, P., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., Sept 2021, In: Applied Mathematical Modelling. 97.2021, September, p. 821-838 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Bohacek, J., 31 Aug 2021, In: Metals. 11.2021, 9, 20 p., 1375.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Bridging Capillary-Driven Fragmentation and Grain Transport with Mixed Columnar-EquiaxedSolidification

    Gomes Rodrigues, C., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 12 Aug 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, October, p. 4609–4622 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Eckert, S., 6 Jul 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 3193-3207 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., 10 May 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, July, p. 3007-3022 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 57.2021, 4, p. 1697-1705 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Important Key Process Simulations in the Field of Steel Metallurgy

    Ludwig, A., Gomes Rodrigues, C., Zhang, Z., Zhang, H., Karimi Sibaki, E., Barati, H., Vakhrushev, A., Al Nasser, M., Wu, M. & Kharicha, A., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 1, p. 2-9 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of Dross Build-up Induced Roughness on Flow Structures and Heat-Transfer of Sink Rolls in Hot-dip Galvanizing Lines

    Reiss, G., Stefan-Kharicha, M., Kharicha, A., Trasca, R. A. (Co-editor), Mugrauer, C., Unger, H. (Co-editor) & Goodwin, F., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS

    Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. 2020
  17. Published

    Two-phase vicoplastic model for the simulation of twin roll casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 1 Dec 2020, In: Journal of materials processing technology. 286.2020, December, 9 p., 116814.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Flow-solidification interaction: A numerical study on solidification of NH4Cl – 70 wt.%H2O solution in a water-cooled mould with a large sample thickness

    Wu, M., Stefan-Kharicha, M., Kharicha, A. & Ludwig, A., 15 Oct 2020, In: International journal of heat and mass transfer. 164.2021, January, 120566.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy

    Zhang, H., Wu, M., Tewari, S. N., Ludwig, A. & Kharicha, A., 24 Sept 2020, In: Journal of materials processing technology. 288.2021, February, 12 p., 116913.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Impact of hydrodynamics on growth and morphology of faceted crystals

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 1 Jul 2020, In: Journal of crystal growth. 541.2020, 1 July, 11 p., 125667.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...16 Next
View graph of relations

Contact

Phone: 3100

Latest Research Output

View more (305)