Abdellah Kharicha

101 - 150 out of 305Page size: 50

Research output

  1. 2020
  2. Published

    Modeling mixed columnar-equiaxed solidification of Sn-10wt%Pb alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M., Zhang, H., Karimi-Sibaki, E., Ludwig, A. & Kharicha, A., 12 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 012024.

    Research output: Contribution to journal › Conference article › peer-review

  3. Published

    Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation

    Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  4. Published

    Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition

    Zhang, H., Wu, M. (Co-editor), Zhang, Z. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  5. Published

    Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M. (Co-editor), Zhang, H. (Co-editor), Karimi Sibaki, E. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng. . Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  6. Published

    Modelling of shear bands during solidification

    Ludwig, A., Gomes Rodrigues, C. (Co-editor), Wu, M. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci.Eng. . online, Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  7. Published

    Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting

    Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  8. Published

    A 2D Multiphase Model of Drop Behavior during Electroslag Remelting

    Chaulet, J., Kharicha, A., Charmond, S., Dussoubs, B., Hans, S., Wu, M., Ludwig, A. & Jardy, A., 8 Apr 2020, In: Metals. 10.2020, 4, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 1 Mar 2020, In: Materials Today Communications. 22.2020, March, 9 p., 100842.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    A Numerical Investigation on the Electrochemical Behavior of CaO and Al2O3 in the ESR Slags

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 20 Feb 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 3, p. 871-879 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    A volume of fluid (VOF) method to model shape change during electrodeposition

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 31 Jan 2020, (E-pub ahead of print) In: Electrochemistry Communications. 112.2020, 106675.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2019
  13. E-pub ahead of print

    A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 29 Oct 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 1, p. 222-235 p 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    A Dynamic Mesh Method to Model Shape Change during Electrodeposition

    Karimi-Sibaki, E., Kharicha, A., Abdi, M., Wu, M., Ludwig, A. & Bohacek, J., 31 Jul 2019, In: Journal of the Electrochemical Society. 166.2019, 12, p. D521-D529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet

    Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., Jul 2019.

    Research output: Contribution to conference › Paper

  16. Published

    Interaction between flow and faceted crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Wu, M., Ludwig, A., Mogeritsch, J., Reiss, G. & Eßl, W., 19 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  17. Published

    On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

    Research output: Contribution to journal › Conference article › peer-review

  18. Published

    On the Modelling of Macrosegregation during Twin-Roll Casting

    Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 p., 012041.

    Research output: Contribution to journal › Conference article › peer-review

  19. Published

    A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 15 Jun 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1334-1350 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    A GPU solver for symmetric positive-definite matrices vs. traditional codes

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Holzmann, T. & Karimi-Sibaki, E., 7 Mar 2019, (E-pub ahead of print) In: Computers and mathematics with applications. 79.2019, 9, p. 2933-2943 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification

    Wu, M., Ludwig, A. & Kharicha, A., Feb 2019, In: Metals : open access journal . 9.2019, 2, 229.

    Research output: Contribution to journal › Review article › peer-review

  22. Published

    Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1429-1443 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    DNS and Engineering Modeling of the Electroslag Remelting Process

    Chaulet, J., Kharicha, A., Dussoubs, B., Charmond, A., Jardy, A. & Hans, S., 2019, p. 107-116.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Investigations on Collective Motion of Cathode Spots in the VAR Process

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2019, p. 11-16.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Modeling Electrochemical Transport of Ions in the ESR Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2019, p. 131-138.

    Research output: Contribution to conference › Paper › peer-review

  26. Published

    Numerical Investigation of the Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Bohacek, J., Holzgruber, H., Ofner, B., Scheriau, A. & Kubin, M., 2019, p. 55-62.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold

    Vakhrushev, A., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold.

    Vakhrushev, A., Kharicha, A., Ludwig, A., Tang, Y., Hackl, G., Watzinger, J. & Gomes Rodrigues, C., 2019.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019, p. 615-619.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Using a numerical model to study the transient clogging phenomena in SEN during continuous casting of steel

    Wu, M., Barati, H., Kharicha, A. & Ludwig, A., 2019, p. 664-667.

    Research output: Contribution to conference › Paper › peer-review

  31. 2018
  32. Published

    Numerical Investigation of Collective Motion of Cathode Spots

    Kharicha, A., Karimi-Sibaki, E., Ludwig, A. & Wu, M., 15 Nov 2018, 28th International Symposium on Discharges and Electrical Insulation in Vacuum: ISDEIV. Institute of Electrical and Electronics Engineers, Vol. 2. p. 467-469 3 p. (International Symposium on Discharges and Elevtrical Insultaion in Vacuum, ISDEIV).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

    Liu, Z., Vakhrushev, A., Wu, M., Kharicha, A., Ludwig, A. & Li, B., 30 Oct 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 1, p. 543-554 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Macrosegregation Formation in an Al–Si Casting Sample with Cross-sectional Change During Directional Solidification

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 6 Oct 2018, In: Transactions of the Indian Institute of Metals. 71.2018, 11, p. 2639–2643 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Electro-vortical MHD Interface Instabilities

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., Oct 2018.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Modeling of the Twin-Roll Casting Process: Transition from Casting to Rolling

    Rodrigues, C., Ludwig, A., Kharicha, A. & Wu, M., 29 Sept 2018, In: Transactions of the Indian Institute of Metals. 71.2018, November, p. 2645-2649 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Contribution of an Electro-Vortex Flow to Primary, Secondary, and Tertiary Electric Current Distribution in an Electrolyte

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 7 Sept 2018, In: Journal of the Electrochemical Society. 165.2018, 11, p. E604-E615 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake

    Liu, Z., Vakhrushev, A., Wu, M., Karimi-Sibaki, E., Kharicha, A., Ludwig, A. & Li, B., 4 Aug 2018, In: Metals : open access journal . 8.2018, 8, 14 p., 609.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment

    Zheng, Y., Wu, M., Karimi-Sibaki, E., Kharicha, A. & Ludwig, A., 1 Jul 2018, In: International journal of heat and mass transfer. 122.2018, July, p. 939-953 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Review of amonium chloride properties

    Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., 6 Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 63.2018, 9, p. 3170-3183 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Review of Ammonium Chloride–Water Solution Properties

    Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 2018, 9

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M. & Karimi-Sibaki, E., 12 Mar 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 49.2018, 3, p. 1421-1433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification

    Stefan-Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 14 Feb 2018, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 5, p. 1708-1724 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A transient model for nozzle clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2 Feb 2018, In: Powder Technology. 329.2018, 15 April, p. 181-198 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Simulation of Non-metallic Inclusion Deposition and Clogging of Nozzle

    Barati, H., Wu, M., Holzmann, T., Kharicha, A. & Ludwig, A., 13 Jan 2018, TMS 2018: CFD Modeling and Simulation in Materials Processing 2018 . p. 149-158 10 p. (Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Numerical modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Liu, Z., Wu, M., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Review on Modeling and Simulation of Electroslag Remelting

    Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2018, In: Steel research international. 89.2018, 1, 20 p., 1700100.

    Research output: Contribution to journal › Review article › peer-review

  48. Published

    Simulation in metallurgy: Past achievements and future challenges

    Bohacek, J., Koutna, N., Ludwig, A., Rodrigues, C., Karimi-Sibaki, E. & Kharicha, A., 1 Jan 2018, 27th International Conference on Metallurgy and Materials, METAL 2018. p. 28-33 6 p. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Simulation of As-Cast Steel Ingots

    Wu, M., Ludwig, A. & Kharicha, A., 1 Jan 2018, In: Steel research international. 89.2018, 1, 14 p., 1700037.

    Research output: Contribution to journal › Review article › peer-review

  50. Published

    Concept of semi-continuous castin (SCC) for large steel strand: a numerical study.

    Wu, M., Zheng, Y., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  51. Published

    Discussion on possible solidification during SEN clogging in steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  52. Published

    "Influence of nucleation and drednrite fragmentation on as-cast structure of Sn-10.0wt.Pb benchmark.

    Zheng, Y., Kharicha, A. & Ludwig, A., 2018, p. 226. 231 p.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Investigation on Mesh Sensitivity of a Transiet Model for Nozzle Clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018, p. 62. 66 p.

    Research output: Contribution to conference › Paper › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Contact

Phone: 3100

Latest Research Output

View more (305)