Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

401 - 500 out of 4,192Page size: 100

Research output

  1. 2022
  2. Published

    A Study on Over-Molded Copper-Based Flexible Electronic Circuits

    Bakr, M., Hubmann, M., Bossuyt, F. & Vanfleteren, J., 16 Oct 2022, In: Micromachines. 13.2022, 10, 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Mechanical flexible epoxy resins with 100% bio-basedcarbon content based on epoxidized vegetable oils

    Schwaiger, M. & Resch-Fauster, K., 6 Oct 2022, In: Journal of Applied Polymer Science. 139.2022, 48, 11 p., e53233.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Wanted: Höchste Qualität bei der Spritzgießsimulation

    Friesenbichler, W., 1 Oct 2022, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). 2022, 3, p. 14-15 2 p.

    Research output: Contribution to journal › Article › Research

  5. Published

    Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristics

    Stiller, T., Berer, M., Katta, A. D. K., Haar, B., Truszkiewicz, E., Kraschitzer, W., Stepanvosky, H., Pinter, G. G. & Lackner, J. M., Oct 2022, In: Additive Manufacturing. 58.2022, October, 14 p., 102987.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    3D Printing of Dual-Cure Networks Based on (Meth)acrylate/Bispropargyl Ether Building Blocks

    Sommer, K., Rieger, P., Müller, S. M., Schwarz, R., Trimmel, G., Feuchter, M. & Grießer, T., 29 Sept 2022, (E-pub ahead of print) In: Advanced engineering materials. 2022, 7 p., 2200901.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, (E-pub ahead of print) In: Steel research international. 2022, 11, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Anti-Adhesive Organosilane Coating Comprising Visibility on Demand

    Kern, W., Müller, M., Bandl, C., Krempl, N. & Kratzer, M., 24 Sept 2022, In: Polymers. 14.2022, 19, 20 p., 4006.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6

    Slapnik, J., Liu, Y., Kupfer, R., Lucyshyn, T., Nardin, B. & Pinter, G., 23 Sept 2022, In: Materials. 15.2022, 19, 14 p., 6600.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    A review of parameters affecting success of lower-limb prosthetic socket and liners and implementation of 3D printing technologies

    Varsavas, S. D., Riemelmoser, F., Arbeiter, F. & Faller, L. M., 22 Sept 2022, (E-pub ahead of print) In: Materials Today: Proceedings. 70.2022, p. 425-430 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Chalcones as sequential λ-orthogonal crosslinkers in dual-cure photopolymers

    Müller, S. M., Nelson, B., Schlögl, S. & Grießer, T., 21 Sept 2022.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Dry fiber filament winding - Fundamentals and challenges

    Neunkirchen, S. & Schledjewski, R., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  15. Published

    LightCycle: Upcycling of regenerates and injection moulding into high quality light weight components using a new technological approach

    Krempl, N. & Friesenbichler, W., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Material selection and mechanical characterization of 3D-printable polymers for medical applications

    Petersmann, S., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Temperature scanning stress relaxation (TSSR): a characterization opportunity for elastomeric crosslinked networks

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C. & Pilz, G., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Wear phenomena in injection molding – Novel wear testing device for detecting dissipation effects in wear of plastic mold steels

    Zidar, D., 15 Sept 2022, 30th Leoben-Conference on Polymer Engineering & Science Conference Proceeding. Chair of Polymer Processing (ed.). Department of Polymer Engineering and Science, Montanuniversität Leoben, p. 120-131 11 p. (Publication Series Polymer Engineering & Science Leoben; vol. 11).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    A Guide to Additive Manufacturing

    Godec, D. (Editor), Gonzalez-Gutierrez, J. (Editor), Nordin, A. (Editor), Pei, E. (Editor) & Alcázar, J. U. (Editor), 14 Sept 2022, 1 ed. 324 p. (Springer Tracts in Additive Manufacturing)

    Research output: Book/Report › Anthology › Research

  20. E-pub ahead of print

    Version 0.2 - CrackDect: Detecting crack densities in images of fiber-reinforced polymers

    Drvoderic, M., Bender, J. J., Pletz, M. & Schuecker, C., 9 Sept 2022, (E-pub ahead of print) In: SoftwareX. 19.2022, July, 2 p., 101198.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

    Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Assessment of Epoxy Functionalized Poly(dimethylsiloxane) Vitrimers Catalyzed with Covalently Attached Amines as Reversible Adhesives

    Wanghofer, F., Wolfberger, A., Oreski, G. & Schlögl, S., Sept 2022, In: Macromolecular materials and engineering. 307.2022, 9, 9 p., 2200237.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Developing a Feedstock for the Fused Filament Fabrication (FFF) of Aluminium

    Momeni, V., Shahroodi, Z., Kukla, C. & Holzer, C., Sept 2022, Conference: 2nd International Conference on Polymer Process Innovation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Spatially controlling the mechanical properties of 3D printed objects by dual-wavelength vat photopolymerization

    Cazin, I., Gleirscher, M. O., Fleisch, M., Berer, M., Sangermano, M. & Schlögl, S., Sept 2022, In: Additive Manufacturing. 57.2022, September, 9 p., 102977.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Compressibility and Relaxation Characteristics of Bindered Non-Crimp-Fabrics Under Temperature and Injection Fluid Influence

    Bender, M. & Fauster, E., 29 Aug 2022, Proceedings of the Munich Symposium on Lightweight Design 2021: Tagungsband zum Münchner Leichtbauseminar 2021. 1 ed. Heidelberg: Springer Vieweg, p. 44-58 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. E-pub ahead of print

    A new method for successful indirect bonding in relation to bond strength

    Wendl, T., Bandl, C., Kern, W., Wendl, B. & Proff, P., 24 Aug 2022, (E-pub ahead of print) In: Biomedical engineering = Biomedizinische Technik. 67.2022, 5, p. 403-410 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Messung der Materialdaten von zwei PA66 GF-Compounds

    Duretek, I., 19 Aug 2022, 6 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Rheotens-Messungen an verschiedenen PP-Compounds

    Duretek, I., 17 Aug 2022, 8 p.

    Research output: Book/Report › Commissioned report › Research

  29. Published

    How to accelerate natural weathering of polymeric photovoltaic backsheets – A comparison with standardized artificial aging

    Ottersböck, B., Oreski, G. & Pinter, G. G., 15 Aug 2022, In: Solar energy materials and solar cells. 244.2022, 15 August, 7 p., 111819.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Freeformer im OP: Projekt CAMed: Implementierung additiver Fertigung im klinischen Bereich.

    Hentschel, L., 1 Aug 2022, In: today. Das ARBURG Magazin. 2022, 80, p. 16-17 2 p.

    Research output: Contribution to journal › Article › Research

  31. Published

    Novel Additive Manufacturing Materials for Waste Heat Deduction

    Schuschnigg, S., Hufnagl, M., Holzer, C., Eder, F., Kroke, E., Schallmeiner, S., Regula, C., Hamedi, Y., Grosche, C., Morganti, E. & Seidler, K., 29 Jul 2022, In: Advanced engineering materials. 2022, 10 p., 22006714.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites

    Rossegger, E., Höller, R., Hrbinič, K., Sangermano, M., Griesser, T. & Schlögl, S., 26 Jul 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2022, 7, 9 p., 2200749.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation

    Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Ermüdungsverhalten von 3D-gedrucktem endlosfaserverstärktem Polylactid

    Petersmann, S., Primetzhofer, A., Habicher, M., Lammer, H., Leßlhumer, J. & Arbeiter, F., 21 Jul 2022, Book of Abstracts Verbund 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Mechanical flexible composites from renewable resources

    Schwaiger, M., Bender, M. & Resch-Fauster, K., 21 Jul 2022, Book of Abstracts - Verbund 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    A COMPARISON OF DIFFERENT NATURAL FIBER REINFORCED COMPOSITES USING RTM & VARI PROCESS

    Ravindran, B., Ekam, M., Kirschnick, U., Le Vély, G., Salzmann, M., Schledjewski, R. & Schmid, S., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Recycling GFRP composites: How to assess environmental performance?

    Kirschnick, U., Krempl, N. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. E-pub ahead of print

    Determination of Cyclic Load Limits for Plasma-Sprayed Copper Tracks on Material Extrusion-Based Printed Surfaces

    Stiller, T., Hausberger, A., Berer, M., Schwan, A. M., Hinterer, A., Spalt, S., Pinter, G. G. & Lackner, J. M., 19 Jul 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 7, 12 p., 2200567.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Adapting the optical reflectivity of carbon fiber reinforced polymers on the nano-scale: Matrix vs. fiber modification

    Haiden, L., Feuchter, M., Barbezat, M., Pansare, A., Brunner, A. J., Neunkirchen, S. & Pinter, G. G., Jul 2022, European Polymer Congress - Book of Abstracts. p. 282

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Biodegradability of polymers – Laboratory scale vs. field scale test

    Wild, N., Feuchter, M., Schindler, P., Poczi, A., Gebeshuber, I. C., Vasiljevic, M., MacQueen , M., Pamminger, H. & Brandstätter, A., Jul 2022, EPF European Polymer Congress - Book of Abstracts. p. 594 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Effect of a Dicycloaliphatic Epoxide on the Thermo-Mechanical Properties of Alkyl, Aryl Epoxide Monomers Cured via UV-Induced Cationic Frontal Polymerization

    Malik, M. S., Wolfahrt, M., Sangermano, M. & Schlögl, S., Jul 2022, In: Macromolecular materials and engineering. 307.2022, 7, 10 p., 2100976.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites

    Wiener, J., Arbeiter, F., Kolednik, O. & Pinter, G., Jul 2022, In: Materials and Design. 219.2022, July, 10 p., 110828.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Nano vs. recycling: a study of different fillers for thermosets

    Feuchter, M., Kern, W. & Sieberer, M., Jul 2022, EPF European Polymer Congress - Book of Abstracts. 1 ed. Prag, p. 272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Recycling of multilayer films containing PE, PA6 and EVOH and their new application

    Plevova, K., Feuchter, M., Wild, N. & Pichorner, H., Jul 2022, EPF European Polymer Congress - Book of Abstracts. p. 730 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A., Feuchter, M. & Pinter, G. G., Jul 2022, 4th International Conference on Materials Design and Applications, MDA 2022, Book of Abstracts. p. 127

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    ADAPTING THE OPTICAL REFLECTIVITY OF CARBON FIBER REINFORCED POLYMERS ON THE NANO-SCALE: MATRIXVS. FIBER MODIFICATION

    Haiden, L., 30 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  48. Published

    3D Printing of Propargyl Ether Derivatives Based on Dual-cure Chemistry

    Sommer, K., Grießer, T. & Müller, S. M., 28 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  49. E-pub ahead of print

    Recent Advances in Type I Photoinitiators for Visible Light Induced Photopolymerization

    Müller, S. M., Schlögl, S., Wiesner, T., Haas, M. & Grießer, T., 27 Jun 2022, (E-pub ahead of print) In: ChemPhotoChem . 6.2022, 11, 13 p., e202200091.

    Research output: Contribution to journal › Review article › peer-review

  50. Published

    Using Near-Infrared-Spectroscopy for quality inspection of prepregs before processing

    Salzmann, M., Schledjewski, R. & Teuchtmann, M., 27 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Consideration of orthotropic thermal properties of short fibre reinforced plastics

    Afsharnia, R., Stadler, G., Primetzhofer, A., Pinter, G. G. & Oswald-Tranta, B., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Influence of viscoelasticity on fatigue behaviour of short fibre reinforced polymers depending on mean stress and fibre orientation

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grün, F., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    TINTENZUSAMMENSETZUNG, KIT, VERFAHREN ZUR HERSTELLUNG EINES VERFORMBAREN LEITERS UNTER VERWENDUNG DER TINTENZUSAMMENSETZUNG, VERFORMBARER LEITER, ELEKTRONISCHE VORRICHTUNG MIT DEM VERFORMBAREN LEITER, VERFAHREN ZUR HERSTELLUNG EINES LEITERS, LEITER UND ELEKTRONISCHE VORRICHTUNG MIT DIESEM LEITER

    Griesser, T. (Inventor) & Krawczyk, K. K. (Inventor), 22 Jun 2022, IPC No. C09D 11/ 52 A I, Patent No. EP4013829, Priority date 10 Aug 2020, Priority No. WO2020EP72404

    Research output: Patent

  54. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jun 2022, 23. Symposium Verbundwerkstoffe und Werkstoffverbunde – Abstract Booklet. DGM, p. 28 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    On the slow crack growth process and associated structure–property relationships in polyamide 12 grades

    Messiha, M., Frank, A., Arbeiter, F. & Pinter, G., 20 Jun 2022, In: Journal of applied polymer science. 139.2022, 24, 15 p., 52357.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

    Shaukat, U., Rossegger, E. & Schlögl, S., 16 Jun 2022, In: Polymers. 14.2022, 12, 69 p., 2449.

    Research output: Contribution to journal › Review article › peer-review

  57. E-pub ahead of print

    Asymmetric chiral and antichiral mechanical metamaterials with tunable Poisson's ratio

    Fleisch, M., Thalhamer, A., Meier, G., Fuchs, P. F., Pinter, G., Schlögl, S. & Berer, M., 7 Jun 2022, (E-pub ahead of print) In: APL Materials. 10.2022, 6, 17 p., 061105.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Anti-adhesive coating comprising visibility-on-demand: a smart approach for quality control

    Bandl, C., Müller, M., Kern, W. & Krempl, N., Jun 2022.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Efficient prediction of crack initiation from arbitrary 2D notches

    Rettl, M., Pletz, M. & Schuecker, C., Jun 2022, In: Theoretical and Applied Fracture Mechanics. 119.2022, June, 16 p., 103376.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Nano vs. recycling: a study of different fillers for thermosets

    Feuchter, M., Sieberer, M. & Kern, W., Jun 2022.

    Research output: Contribution to conference › Poster › Research

  61. Published

    Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

    Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Efficient Finite Element Modeling of Steel Cables in Reinforced Rubber

    Pletz, M., Frankl, S. M. & Schuecker, C., 24 May 2022, (E-pub ahead of print) In: Journal of composites science. 6.2022, 6, 20 p., 152.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Fatigue Analysis and Defect Size Evaluation of Filled NBR including Temperature Influence

    Schieppati, J., Schrittesser, B., Tagliabue, S., Andena, L., Holzner, A., Poduška, J. & Pinter, G. G., 24 May 2022, In: Materials. 15.2022, 11, 23 p., 3745.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Matrix–fiber interfacial debonding in soft composite materials: Cyclically behavior modeling and microstructural evolution

    Mansouri, M. R., Fuchs, P. F., Baghani, M. & Schuecker, C., 15 May 2022, In: Composites Part B: Engineering. 237.2022, 15 May, 12 p., 109853.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting

    Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 May 2022, In: Advanced engineering materials. 24.2022, 2200225.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    CARRIER ROLLER WITH SENSOR FOR SENSING SIGNALS BEING CHARACTERISTIC FOR TEMPERATURE AND STRAIN AT A ROLLER SHAFT

    Moser, P. (Inventor), Kern, W. (Inventor), Grießer, T. (Inventor) & Feiel, S. (Inventor), 11 May 2022, IPC No. G01B 7/ 16 A N, Patent No. EP3995418, Priority date 9 Nov 2020, Priority No. EP20200206481

    Research output: Patent

  67. Published

    ROCK ANCHOR WITH SENSOR FOR MEASURING A MECHANICAL TENSION

    Feiel, S. (Inventor), Kern, W. (Inventor), Griesser, T. (Inventor) & Moser, P. (Inventor), 5 May 2022, IPC No. F16B 31/ 02 A I, Patent No. US2022136389, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  68. Published

    Peeling of Flexible Laminates—Determination of Interlayer Adhesion of Backsheet Laminates Used for Photovoltaic Modules

    Oreski, G. & Pinter, G., 4 May 2022, In: Materials. 15.2022, 9, 11 p., 3294.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials

    Pletz, M. & Arbeiter, F. J., 3 May 2022, In: Materials. 15.2022, 9, 13 p., 3273.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Improved concept for iterative crack propagation using configurational forces for targeted angle correction

    Frankl, S. M., Pletz, M. & Schuecker, C., 1 May 2022, In: Engineering Fracture Mechanics. 266.2022, 1 May, 15 p., 108403.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery

    Eder, S., Wiltschko, L., Koutsamanis, I., Afonso Urich, J. A., Arbeiter, F., Roblegg, E. & Spoerk, M., May 2022, In: European Journal of Pharmaceutics and Biopharmaceutics. 174.2022, May, p. 77-89 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Hardness loss of plastic mold steels: Phenomenon in injection molding

    Zidar, D., 26 Apr 2022.

    Research output: Contribution to conference › Presentation › Research

  73. Published

    Nanoindentation for Fast Investigation of PET Film Degradation

    Christöfl, P., Ottersböck, B., Czibula, C., Macher, A., Teichert, C., Pinter, G. G. & Oreski, G., 20 Apr 2022, In: JOM. 74.2022, 6, p. 2287-2294 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Fatigue behaviour of thermoplastic bulk materials under mixed mode loading conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 14 Apr 2022, 18th International Conference on Deformation, Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Loss of Steel Hardness in Injection Molding: Phenomenon -Analysis of Temperature, Polymer and Steel

    Zidar, D., 12 Apr 2022.

    Research output: Contribution to conference › Presentation › Research

  76. Published

    Effect of die temperature on the fatigue behaviour of PLA produced by means of fused filament fabrication

    Petersmann, S., Primetzhofer, A., Habicher, M., Leßlhumer, J., Lammer, H. & Arbeiter, F., 11 Apr 2022.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Effect of die temperature on the fatigue behaviour of PLA produced by means of fused filament fabrication

    Petersmann, S., Primetzhofer, A., Habicher, M., Leßlhumer, J., Lammer, H. & Arbeiter, F., 11 Apr 2022, Book of abstracts from 18th International Conference on Deformation, Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 11 Apr 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 6 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper

  80. Published

    Mechanical properties of additively manufactured polymeric implant materials in dependence of microstructure, temperature and strain-rate

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 5 Apr 2022, Abstract Book of 18th European Mechanics of Materials Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. E-pub ahead of print

    Characterization methods for strain-induced damage in polypropylene

    Wiener, J., Preissegger, F., Plank, B., Arbeiter, F., Kolednik, O. & Pinter, G., 4 Apr 2022, (E-pub ahead of print) In: Polymer Engineering and Science. 62.2022, 6, p. 1959-1973 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 4 Apr 2022.

    Research output: Contribution to conference › Paper › peer-review

  83. Published

    Ein zweites Leben für Haushaltsverpackungen: Ein Kooperationsprojekt des Kunststoff-Clusters aus der Sicht der Beteiligten

    Krempl, N., Lielacher, R., Nadherny-Borutin, S., Aschermayer, F., Baumann, A., Schuch, D. & Schlenz, E., Apr 2022, In: Chemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & Materialwissenschaften. 2022, 4, p. 33-35 3 p.

    Research output: Contribution to journal › Article › Research

  84. Published

    Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

    Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 23 Mar 2022, In: Polymer crystallization. 2022, 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    To Waste or Not to Waste Questioning Potential Health Risks of Micro- and Nanoplastics with a Focus on Their Ingestion and Potential Carcinogenicity

    Gruber, E. S., Stadlbauer, V., Pichler, V., Resch-Fauster, K., Todorovic, A., Meisel, T., Trawoeger, S., Hollóczki, O., Turner, S. D., Wadsak, W., Vethaak, A. D. & Kenner, L., 22 Mar 2022, (E-pub ahead of print) In: Exposure and health. 14.2022, March, 19 p.

    Research output: Contribution to journal › Review article › peer-review

  86. E-pub ahead of print

    A Review on Applicability, Limitations, and Improvements of Polymeric Materials in High-Pressure Hydrogen Gas Atmospheres

    Balasooriya, W., Clute, C., Schrittesser, B. C. & Pinter, G. G., 15 Mar 2022, (E-pub ahead of print) In: Polymer reviews. 62.2022, 1, p. 175-209 35 p.

    Research output: Contribution to journal › Review article › peer-review

  87. Published

    Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent bases

    Reisinger, D., Dietliker, K., Sangermano, M. & Schlögl, S., 7 Mar 2022, In: Polymer Chemistry. 13.2022, 9, p. 1169-1176 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Ink composition, kit, method of manufacturing a deformable conductor utilizing the ink composition, deformable conductor, electronic device comprising the deformable conductor, method of manufacturing a conductor, conductor and electronic device comprising the conductor

    Griesser, T. (Inventor) & Krawczyk, K. K. (Inventor), 3 Mar 2022, IPC No. C09D 11/ 52 A I, Patent No. AU2020328846, Priority date 10 Aug 2020, Priority No. WO2020EP72404

    Research output: Patent

  89. Published

    Hybrid In Situ Reinforcement of EPDM Rubber Compounds Based on Phenolic Novolac Resin and Ionic Coagent

    Strohmeier, L., Balasooriya, W., Schrittesser, B., van Duin, M. & Schlögl, S., 25 Feb 2022, In: Applied Sciences : open access journal. 12.2022, 5, 17 p., 2432.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Multimaterial Extrusion-Based Additive Manufacturing of Compliant Crack Arrester: Influence of Interlayer Length, Thickness, and Applied Strain Rate

    Waly, C., Petersmann, S. & Arbeiter, F., 23 Feb 2022, In: Advanced engineering materials. 2022, 11 p., 2101703.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Correction: Synthesis and characterization of diacylgermanes: persistent derivatives with superior photoreactivity

    Püschmann, S. D., Frühwirt, P., Müller, S. M., Wagner, S. H., Torvisco, A., Fischer, R. C., Kelterer, A. M., Grießer, T., Gescheidt, G. & Haas, M., 21 Feb 2022, In: Dalton transactions. 51, 7, p. 2975 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  92. Published

    Surface-Immobilized Photoinitiators for Light Induced Polymerization and Coupling Reactions

    Müller, M., Bandl, C. & Kern, W., 4 Feb 2022, In: Polymers. 14.2022, 3, 49 p., 608.

    Research output: Contribution to journal › Review article › peer-review

  93. Published

    Evaluation and consideration of local specimen material properties in lifetime prediction of short fiber-reinforced PA6T/6I

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2022, In: Fatigue and Fracture of Engineering Materials and Structures. 45.2022, 4, p. 980-990 11 p., 13634.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

    Van de Voorde, B., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J. M., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Pyl, L. & Van Vlierberghe, S., Feb 2022, In: Additive Manufacturing. 50.2022, February, 14 p., 102518.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Mechanisms of rapid fracture in PA12 grades

    Messiha, M., Frank, A., Heimink, J., Arbeiter, F. & Pinter, G., Feb 2022, In: Theoretical and Applied Fracture Mechanics. 117.2022, February, 11 p., 103145.

    Research output: Contribution to journal › Article › Research › peer-review

  96. E-pub ahead of print

    Assessing Failure in Steel Cable-Reinforced Rubber Belts Using Multi-Scale FEM Modelling

    Frankl, S. M., Pletz, M., Wondracek, A. & Schuecker, C., 20 Jan 2022, (E-pub ahead of print) In: Journal of composites science. 6.2022, 2, 13 p., 34.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    How hydrogen bonds influence the slow crack growth resistance of polyamide 12

    Messiha, M., Frank, A., Arbeiter, F. & Pinter, G., 17 Jan 2022, In: Polymer. 239.2022, 17 January, 10 p., 124437.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    In-line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 5 Jan 2022, In: Polymer Composites. 43.2022, 3, p. 1590-1602 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    High-performance composite with 100% bio-based carbon content produced from epoxidized linseed oil, citric acid and flax fiber reinforcement

    Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., Jan 2022, In: Composites Part A: Applied Science and Manufacturing. 152.2022, January, 9 p., 106666.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Influence of morphology and chemical surface composition on electrical conductivity of SiC microspheres

    Pleșa, I., Radl, S., Schichler, U., Ramsauer, F., Ladstätter, W., Bergmann, I., Kern, W. & Schlögl, S., Jan 2022, In: Surface Science. 715.2022, January, 11 p., 121942.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Investigating thermomechanical recycling of poly(ethylene terephthalate) containing phosphorus flame retardants

    Bascucci, C., Duretek, I., Lehner, S., Holzer, C., Gaan, S., Hufenus, R. & Gooneie, A., Jan 2022, In: Polymer Degradation and Stability. 195.2022, January, 11 p., 109783.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301