Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3901 - 4000 out of 4,192Page size: 100

Research output

  1. 2005
  2. Published

    Verfahren zur Oberflächenanalyse eines Materials

    Gruber, D. (Inventor), Buder-Stroisznigg, M. (Inventor) & Wallner, G. (Inventor), 20 Jun 2005, Patent No. A 1036/2005

    Research output: Patent

  3. Published

    Adaptierung der prüftechnischen Einrichtungen zur mechanischen Prüfung von Klebstoffverbindungen

    Lang, R., Pilz, G. & Wolfahrt, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil2 (DA Eder)"

    Wallner, G., Eder, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Aging mechanisms and delamination behaviour of polymeric multi-layer films for PV encapsulation

    Oreski, G. & Wallner, G., 2005, Proceedings of ISES 2005 Solar World Congress. p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Aging mechanisms of polymeric films for PV encapsulation

    Oreski, G. & Wallner, G., 2005, In: Solar energy. 76, p. 612-617

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Aging of polymeric films for transparent insulation wall applications

    Wallner, G. & Lang, R., 2005, In: Solar energy. 79, p. 603-611

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    ANALYSIS OF A NEW TEST METHOD FOR HIGH RATE LOADING OF POLYMERS

    Flaggl, E. P., 2005

    Research output: Thesis › Diploma Thesis

  9. Published

    A New Plasticating Model for Amorphous and Semi-crystalline Polymers in Single Screw Extruders

    Langecker, G. & Zitzenbacher, G., 2005, In: International polymer processing. 4, p. 360-368

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Anforderungsprofil für kalthärtende Klebstoffe im Flugzeuginnenraum

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Anwendung dere SIS/DSC-Methodik auf PE Werkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Applicability and limitations of various fracture mechanical testing concepts under static and cyclic loads

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C. & Friebe, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Basic Characterization of Polymeric Materials for Solar Collector Absorbers

    Kahlen, S., Wallner, G., Fischer, J., Meir, M. G. & Rekstad, J., 2005, NorthSun2005 – Electronic Proceedings. p. 8-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Bending tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Berechnung von Mischteilen für Schubschnecken

    Langecker, G., Wieczorek, A. & Gornik, C., 2005, In: Kunststoffe - Plast Europe. 95, p. 92-95

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Bestimmung der Bruchkraft von Kunststoffketten im monotonen Zugversuch

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Bestimmung der Glasübergangstemperatur mit dynamisch-mechanischer Analyse (DMA)

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Bestimmung der Zugeigenschaften von Folien aus Infusionsbeuteln (Phase 6)

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Blocker Door fretting fatigue test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Blocker Door fretting fatigue test - Karon B coating

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Brittle and ductile failure behavior of PE pipe grades

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Bruchmechanische Eigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Calculating Mixing Sections for Reciprocating Screws

    Langecker, G., Wieczorek, A. & Gornik, C., 2005, In: Kunststoffe - Plast Europe. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Characterisation of the compression behavior of engineering polymers

    Jerabek, M., Steinberger, R. & Major, Z., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Characterization of the failure behavior of elastomers by fracture mechanics methods

    Major, Z., Balika, W., Feichter, C., Steinberger, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Characterization of the tensile-compression fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Charakterisierung der Auswirkungen unterschiedlicher Laminatvorbehandlung (Sandstrahlen) auf die Oberflächenqualität und den GIC-Wert von verklebten Laminaten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Charakterisierung der Topographie organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroissnigg, M., Kicker, H., Wallner, G., Gruber, D., Strauss, B. & Jandel, L., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Charakterisierung der Topographie organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroissnigg, M., Kicker, H., Wallner, G., Gruber, D., Strauss, B. & Jandel, L., 2005, Forum für Metallurgie und Werkstofftechnik. p. 2-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Charakterisierung des Ermüdungsrisswachstums in PE mit CT Proben - Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Charakterisierung des Impactverhaltens von PE-Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Charakterisierung des spröden Risswachstums in Polyethylen-Rohrwerkstoffen mit beschleunigten Prüfmethoden

    Hiesch, T. J., 2005, 63 p.

    Research output: Thesis › Diploma Thesis

  34. Published

    Charakterisierung transparenter Formstoffe für Skier

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Charpy tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Comparison of thermomechanical properties and creep behaviour of HPM001 and HPM100

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Compression tests for pipe wall specimens

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Compression tests for pipe wall specimens, contacting and non-contacting deformation measurements

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Compression Tests on a Hobas CC-GRP Pipe Material

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Corridx

    Fink, J., 2005

    Research output: Non-textual form › Software › Transfer

  41. Published

    CorrIdx, Programmpaket zur Formatierung eines chemischen Index: Teil 2: Das Style File

    Fink, J., 2005

    Research output: Non-textual form › Software › Transfer

  42. Published

    Curing Process Control for Neat Resins by DSC, DMA and DEA

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Deformation behavior of polyolefins under monotonic loading - development and implementation of test methods

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Delamination behaviour of multi-layer films for PV encapsulation, Solar Energy Materials and Solar Cells

    Oreski, G. & Wallner, G., 2005, In: Solar energy. 89, p. 139-151

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Determination of "True Stress vs. True Strain" Data for Thin Molybdenum Sheets

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Development and implementation of a video extensometer system

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Development and implementation of new methods of fractionation and characterization for semi-crystalline polymers, especially polypropylene

    Aust, N., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components - Thermography

    Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Development of fatigue test methods for elastomers - Standard and complex methods

    Feichter, C., Major, Z. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Dielektrische Analyse (DEA) - Geräte und Leistungsmerkmale

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    DMA-Ringversuch

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Druckversuche an Composite-Proben - Compression strength and modulus measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Druckversuche an Flugzeugbauteil-Komponenten

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    Druckversuche an Kalibrierkörpern (Flugzeugbauteil-Komponenten)

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    DSC-Messungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Dynamic mechanical analysis for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Dynamisch-mechanische Analyse (DMA) von Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials

    Balika, W., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Einfluss der Härtungsbedingungen auf Reinharz-Schlüsseleigenschaften

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften eines Epoxidharz - Matrixwerkstoffes

    Wolfahrt, M., Pilz, G. & Lang, R., 2005, 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Entwicklung von Gießformen für die Reinharzhärtung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Ermittlung der Reibwerte von Kunststoffgütern

    Langecker, G., Schatzer, R. & Zitzenbacher, G., 2005, In: Kunststoffe - Plast Europe. 95, p. 43-47

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Ermüdungsrisswachstumsversuche an CT Proben aus PE bei 10 Hz

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Fatigue behavior of RTM laminates

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2005, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Fatigue crack growth in PE-HD pipe grades

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2005, In: Plastics, rubber and composites. 34, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Fatigue of Glass-Fiber Reinforced Plastics - Characterization Methods and Structure-Property-Relationsships

    Zahnt, B.-A. & Lang, R., 2005, Series on Advances in Experimental Mechanics Volume 9. p. 107-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Feuchteaufnahmeverhalten von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Fracture mechanical tests for HPM001

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Fracture mechanical tests for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Fracture surface anaylsis

    Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Guest Editoral

    Wallner, G. & Lang, R., 2005, In: Solar energy. p. 571-572

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Härtungscharakterisierung von Reinharzen mit dynamischer Differ-enzkalorimetrie (DSC)

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Impact bending tests (Charpy) for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Improvement of the long-term stability of ultra-high molecular weight polyethylene (UHMW-PE) for endoprostheses by stabilisation with [alpha]-tocopherol

    Wolf, C., 2005

    Research output: Thesis › Doctoral Thesis

  75. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation and experiments

    Feichter, C., Major, Z. & Lang, R., 2005, In: VLK-News. p. 6-12

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation experiments

    Feichter, C., Major, Z. & Lang, R., 2005, European Conference on Constitutive Models for Rubber IV (ECCMR 2005). Balkema, p. 89-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Instrumentierte Impactversuche an Rohren aus Polypropylen in Anlehnung an EN 744

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Interlaminare Scherfestigkeitsmessungen - Interlaminar sher strength (ILSS) measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Interlaminar shear tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005, Proceedings of the 2nd Annual European Rheology Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Investigations on a crack containing elastomer/metal component

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Konzept zur Nachweisführung für Nutzungsdauer und Sicherheit von PE-Druckrohren bei beliebiger Einbausituation

    Lang, R., Pinter, G. & Balika, W., 2005, In: 3 R international. 44, p. 33-41

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Kunststofftechnische Aspekte bei der Entwicklung organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroizsnigg, M., Wallner, G., Gruber, D., Strauss, B., Jandel, L. & Lang, R., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150, p. 293-300

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Kunststofftechnische Aspekte bei der Entwicklung organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroissnigg, M., Wallner, G., Gruber, D., Strauss, B. & Jandel, L., 2005, Forum für Metallurgie und Werkstofftechnik. p. 2-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Lichtemittierendes Bauelement

    Kern, W. (Inventor), 2005, Patent No. AT 413.925

    Research output: Patent

  87. Published

    Literature review on the field of elastomer fracture and fatigue

    Feichter, C. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Literatur- und Marktrecherche nach potentiell geeigneten Klebstoffsystemen für Flugzeuginnenanwendungen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Low Temperature Cure Adhesives for Aircraft Interior Applications with Phenolic Matrix Composites - Feasibility Study and Material Characterization

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Materialanalyse an spritzgegossenen Abdeckkappen für Solar-Wechselrichter

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Materialuntersuchung an Kunststoffschlägel

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Measurement and test system development. (A) Development of and optical crack length measurement system and (B) Measurement of the adiabatic and hysteretic heating by a thermography system

    Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Measurement of polymer melts’ viscosity at increased pressure levels with the consideration of the compression heat

    Rajganesh Jegadeesan, X., 2005, 98 p.

    Research output: Thesis › Master's Thesis

  94. Published

    Mechanical and thermal investigations on materials for head covers used in medium-voltage applications

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Mechanische Eigenschaften kohlenfaserverstärkter RTM-Laminate bei monotoner und zyklischer Zugbelastung

    Ladstätter, E., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Mechanische und thermo-kalorimetrische Charakterisierung von kalt-härtenden Klebstoffen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Methodikentwicklung für die Klebstoffcharakterisierung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Methodikentwicklung für eine Klebstoffspezifikation

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Methodikentwicklung zur Reinharzoptimierung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Moderne Berechnungsmethoden zur Auslegung von Schnecken und Extrusionswerkzeugen

    Langecker, G. & Fertschej, A., 2005, In: Österreichische Kunststoff-Zeitschrift. p. 192-195

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Non-contact full-field strain analysis

    Steinberger, R., Feichter, C. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...36 37 38 39 40 41 42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301