Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

241 - 260 out of 4,192Page size: 20

Research output

  1. 2023
  2. Published

    Measurement of thermal conductivity and specific volume for four pharmaceutical formulations

    Duretek, I., 28 Jul 2023, 13 p.

    Research output: Book/Report › Commissioned report › Research

  3. E-pub ahead of print

    Tactile friction and perception of UV-curable coatings and their relation to physical surface parameters and contact mechanic simulation

    Ules, T., Grießer, M., Hausberger, A., Schipfer, C., Mansouri, M., Fuchs, P., Schlögl, S. & Gruber, D. P., 28 Jul 2023, (E-pub ahead of print) In: Journal of coatings technology and research. 20.2023, 6, p. 1803-1814 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Inferring material properties from FRP processes via sim-to-real learning

    Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

    Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Concepts towards bio-inspired multilayered polymer-composites

    Wiener, J., Arbeiter, F. & Pinter, G. G., 21 Jul 2023, (E-pub ahead of print) In: Procedia Structural Integrity. 2023, 47, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules

    Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L. & Schlögl, S., 20 Jul 2023, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 126.2023, August, 10 p., 103454.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Review of in-process defect monitoring for automated tape laying

    Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Computational modelling of the separation of molten polymer blends by a centrifugal technique

    Medvid, V., Steiner, H., Irrenfried, C., Feuchter, M. & Brenn, G., 17 Jul 2023, In: Journal of polymer research. 30.2023, 8, 308.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Vitrimeric shape memory polymer-based fingertips for adaptive grasping

    Kashef Tabrizian, S., Alabiso, W., Shaukat, U., Terryn, S., Rossegger, E., Brancart, J., Legrand, J., Schlögl, S. & Vanderborght, B., 12 Jul 2023, In: Frontiers in robotics and AI. 10.2023, 1206579.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Study of a novel curved single lap joint concept with non-uniform adhesive thickness: Master thesis in Mechanical Engineering

    Pires, V. D. C., 5 Jul 2023

    Research output: Thesis › Doctoral Thesis

  14. Published

    Fatigue Behavior of Elastomeric Components: A Review of the Key Factors of Rubber Formulation, Manufacturing, and Service Conditions

    Gehling, T., Schieppati, J., Balasooriya, W., Kerschbaumer, R. C. & Pinter, G. G., 3 Jul 2023, In: Polymer reviews. 63.2023, 3, p. 763-804 42 p.

    Research output: Contribution to journal › Review article › peer-review

  15. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124.2023, July, 10 p., 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media—From Intrinsic Activity to the Effects of Surface Oxidation

    Neumüller, D., Rafailović, L. D., Jovanović, A. Z., Skorodumova, N. V., Pašti, I. A., Lassnig, A., Grießer, T., Gammer, C. & Eckert, J., Jul 2023, In: Nanomaterials. 13.2023, 14, 18 p., 2085.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    3D Printing of Covalent Adaptable Networks: Overview, Applications and Future Prospects

    Bijalwan, V., Rana, S., Singh, H. K., Yun, G. J., Jamil, M. & Schlögl, S., 30 Jun 2023, (E-pub ahead of print) In: Polymer reviews. 64.2024, 1, p. 36-79 44 p.

    Research output: Contribution to journal › Review article › peer-review

  18. Published

    Additive Printing of Thermally Cured Two-Component Epoxy: A Route to Mesoscale Structuring for Improved Ductility

    Krawczyk, K., Wheeldon, A., Kamble, M., Popovic, K., Patter, P., Postl, M., Belegratis, M., Sieberer, M., Bandl, C., Kern, W., Constantinescu, D. M., Baciu, F., Stochioiu, C., Apostol, D. A. & Picu, C. R., 30 Jun 2023, In: ACS applied polymer materials. 5.2023, 7, p. 4859-4867 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Surface-Initiated Polymerizations Mediated by Novel Germanium-Based Photoinitiators

    Müller, M., Drusgala, M., Fischer, R. C., Torvisco, A., Kern, W., Haas, M. & Bandl, C., 23 Jun 2023, In: ACS Applied Materials and Interfaces. 15.2023, 26, p. 31836-31848 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes

    Trávníček, L., Poduška, J., Messiha, M., Arbeiter, F., Pinter, G. G., Náhlík, L. & Hutař, P., 14 Jun 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 289.2023, 1 September, 18 p., 109423.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 9 Jun 2023, (E-pub ahead of print) In: RSC Advances. 13.2023, 26, p. 17536-17544 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...9 10 11 12 13 14 15 16 ...210 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301