Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

Research output: Contribution to journal › Article › Research › peer-review

Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

Research output: Contribution to journal › Article › Research › peer-review

Towards high-strength electrolyte-supported solid oxide fuel cells

Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

Research output: Contribution to journal › Article › Research › peer-review

Understanding the lower fracture resistance of cold sintered ceramics

Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

Research output: Contribution to journal › Article › Research › peer-review

20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

Research output: Contribution to journal › Article › Research › peer-review

Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy

Huang, Y., Chen, Z., Meindlhumer, M., Hahn, R., Holec, D., Leiner, T., Maier-Kiener, V., Zheng, Y., Zhang, Z., Hatzenbichler, L., Riedl, H., Mitterer, C. & Zhang, Z., 23 Jan 2025, In: Acta Materialia. 286.2025, 1 March, 15 p., 120774.

Research output: Contribution to journal › Article › Research › peer-review

Effects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument study

Schiester, M., Waldl, H., Rice, K. P., Hans, M., Primetzhofer, D., Schalk, N. & Tkadletz, M., 17 Jan 2025, In: Ultramicroscopy. 270.2025, April, 10 p., 114105.

Research output: Contribution to journal › Article › Research › peer-review

Ab-initio grain boundary thermodynamics beyond the dilute limit

Spitaler, T., Scheiber, D., Dösinger, C. A., Hodapp, M. & Romaner, L., 14 Jan 2025, In: Acta materialia. 286.2025, 1 March, 13 p., 120725.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural features and hydrogen diffusion in bcc FeCr alloys: A comparison between the Kelvin probe- and nanohardness based-methods

Rao, J., Sun, B., Ganapathi, A., Dong, X., Hohenwarter, A., Wu, C. H., Rohwerder, M., Dehm, G. & Duarte, M. J., 14 Jan 2025, In: International Journal of Hydrogen Energy. 102.2025, 10 February, p. 1103-1115 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

Research output: Contribution to journal › Article › Research › peer-review

Synergistic precipitation reactions in a novel high-temperature Ti-alloy

Farabi, E., He, X., Obersteiner, D., Musi, M., Neves, J., Klein, T. & Primig, S., 9 Jan 2025, In: Scripta materialia. 259.2025, 1 April, 7 p., 116543.

Research output: Contribution to journal › Article › Research › peer-review

Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

Research output: Contribution to journal › Article › Research › peer-review

Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitride

Nayak, G. K., Srinivasan, P., Todt, J., Daniel, R., Nicolini, P. & Holec, D., 6 Jan 2025, In: Computational materials science. 249.2025, 5 February, 11 p., 113629.

Research output: Contribution to journal › Article › Research › peer-review

Superhydrophilic Titania Coatings on Glass Substrates via the Hydrosol Approach

Theodorakopoulos, G. V., Arfanis, M., Mouti, N.-M., Kaidatzis, A., Mitterer, C., Giannakopoulos, K. & Falaras, P., 6 Jan 2025, In: Surfaces. 8.2025, 1, 16 p.

Research output: Contribution to journal › Article › Research › peer-review

Contact damage response of alumina-based layered architectures under different loading configurations

Schlacher, J. C., Stücklberger, F., Jabr, A. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 3, 8 p., 117037.

Research output: Contribution to journal › Article › Research › peer-review

Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

Najafzadehkhoee, A., Jabr, A., Talimian, A., Papsik, R., Drdlik, D., Maca, K., Galusek, D. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 4, 9 p., 117071.

Research output: Contribution to journal › Article › Research › peer-review

In Vivo Assessment on Freeze-Cast Calcium Phosphate-Based Scaffolds with a Selective Cell/Tissue Ingrowth

Pejchalová, L., Pejchal, J., Roleček, J., Vojníková, M., Chlup, Z., Mařák, V., González-Sánchez, M., Čížková, J. & Salamon, D., 2025, In: ACS Applied Materials and Interfaces. 16.2024, 43, p. 58326-58336 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Reliable Atom Probe Tomography of Cu Nanoparticles Through Tailored Encapsulation by an Electrodeposited Film

Cicek, A., Knabl, F., Schiester, M., Waldl, H., Rafailovic, L., Tkadletz, M. & Mitterer, C., 30 Dec 2024, In: Nanomaterials. 15.2025, 1, 13 p., 43.

Research output: Contribution to journal › Article › Research › peer-review

Crystallization of Fe₇₄Mo₄P₁₀C_7.5B_2.5Si₂ metallic glass: Insights from in-situ synchrotron diffraction and Flash DSC

Römer, F., Ramasamy, P., Steffny, I., Stoica, M., Lienert, U., Quick, C. R., Hegedüs, Z., Eckert, J. & Spieckermann, F., 27 Dec 2024, (E-pub ahead of print) In: Materials today advances. 25.2025, March, 7 p., 100550.

Research output: Contribution to journal › Article › Research › peer-review

Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloying

Moravcik, I., Alfreider, M., Wurster, S., Schretter, L., Zadera, A., Pernica, V., Čamek, L., Eckert, J. & Hohenwarter, A., 27 Dec 2024, (E-pub ahead of print) In: Materials Science and Engineering: A. 924.2025, February, 14 p., 147757.

Research output: Contribution to journal › Article › Research › peer-review

Unusual hardness and string-like structures relaxation of metallic glass investigated by in-situ synchrotron radiation

Zhang, N. Z., Spieckermann, F., Yuan, X. D., Şopu, D., Jin, X., Sun, K., Mendez, A., Yu, P., Wang, G. & Eckert, J., 25 Dec 2024, (E-pub ahead of print) In: Journal of alloys and compounds. 1010.2025, 5 January, 7 p., 178287.

Research output: Contribution to journal › Article › Research › peer-review

Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment

Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagram

Schrittwieser, D., Marin Morales, D., Pahr, H., Lumper-Wimler, L., Glushko, O. & Schnitzer, R., 18 Dec 2024, In: Welding in the world. ??? Stand: 4. Februar 2025, ??? Stand: 4. Februar 2025, 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced hydrogen evolution via nano-patterned Pt-based metallic glass and dynamic copper oxide foam formation

Cai, F.-F., Sarac, B., Akman, A., Londoño, J. J., Gümrükcü, S., Schweiger, L., Hantusch, M., Schroers, J., Blatter, A., Gebert, A., Spieckermann, F. & Eckert, J., 12 Dec 2024, In: Materials and Design. 249.2025, January, 11 p., 113530.

Research output: Contribution to journal › Article › Research › peer-review

On the impact of nitrogen and aluminum doping on silicon carbide polytype stability: Insights from first principle calculations

Rajabzadeh, Z., Hammer, R. & Romaner, L., 10 Dec 2024, In: Journal of the American Ceramic Society. 108.2024, 4, 9 p., e20284.

Research output: Contribution to journal › Article › Research › peer-review

Lead-free dielectric thin films: Synthesis of Ag(Nb1−xTax)O3 via reactive dc magnetron sputtering

Kölbl, L., Mehrabi, M., Griesser, T., Munnik, F. & Mitterer, C., 6 Dec 2024, In: Journal of vacuum science & technology / A (JVST). 43.2024, 1, 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterization

Tang, J., Renk, O. & Tkadletz, M., 6 Dec 2024, In: Materials characterization. 219.2025, January, 8 p., 114618.

Research output: Contribution to journal › Article › Research › peer-review

Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphology

Knabl, F., Gutnik, D., Patil, P., Bandl, C., Vermeij, T., Pichler, C. M., Putz, B. & Mitterer, C., Dec 2024, In: Vacuum. 230, 113724.

Research output: Contribution to journal › Article › Research › peer-review

Scaffold microstructure evolution via freeze-casting and hydrothermal phase transformation of calcium phosphate

Siddiqui, M. & Salamon, D., Dec 2024, In: Journal of the American Ceramic Society. 107, 12, p. 7994-8006 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Towards high strength SrTiO₃-based composites fabricated at room temperature

Jabr, A., Kuzmić, N., Škapin, S. D., Jantunen, H., Nelo, M., Spreitzer, M. & Bermejo, R., Dec 2024, In: Journal of the European Ceramic Society. 44, 15, 116782.

Research output: Contribution to journal › Article › Research › peer-review

Magnetic moments in CrN-based systems are robust: An ab initio study of alloys and superlattices

Matas, M., Mayrhofer, P. H. & Holec, D., 23 Nov 2024, In: Surface & coatings technology. 496.2025, 15 January, 8 p., 131540.

Research output: Contribution to journal › Article › Research › peer-review

Exploring the fracture toughness and fatigue crack growth behavior of MoRe alloys

Pillmeier, S., Žák, S., Pippan, R., Eckert, J. & Hohenwarter, A., 19 Nov 2024, In: International Journal of Refractory Metals and Hard Materials. 127.2025, February, 10 p., 106969.

Research output: Contribution to journal › Article › Research › peer-review

Descriptors based on the density of states for efficient machine learning of grain-boundary segregation energies

Dösinger, C. A., Hammerschmidt, T., Peil, O. E., Scheiber, D. & Romaner, L., 13 Nov 2024, In: Computational materials science. 247.2025, 31 January 2025, 10 p., 113493.

Research output: Contribution to journal › Article › Research › peer-review

Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

Research output: Contribution to journal › Article › Research › peer-review

Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysis

Shi, X., Misch, D., Skerbisch, L., Sachsenhofer, R. F., Žák, S., Cordill, M. & Kiener, D., Nov 2024, In: Marine and petroleum geology. 169.2024, November, 16 p., 107083.

Research output: Contribution to journal › Article › Research › peer-review

Perspective on pathways towards responsible surface engineering

Hans, M., Schneider, J. M., Matthews, A. & Mitterer, C., 21 Oct 2024, In: Surface & coatings technology. 494.2024, 30 October, Part 2, 14 p., 131486.

Research output: Contribution to journal › Article › Research › peer-review

Revealing the embrittlement phenomena after post-weld heat treatment of high-strength weld metal using high-resolution microscopy

Schrittwieser, D., Pahr, H., Musi, M., Landefeld, A., Glushko, O. & Schnitzer, R., 21 Oct 2024, In: Journal of Materials Research and Technology. 33.2024, November-December, p. 5289-5298 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Strong high-density composites from wheat straw

Neudecker, F., Veigel, S., Bodner, S., Keckes, J., Duchoslav, J., Stifter, D. & Gindl-Altmutter, W., 18 Oct 2024, In: Composites Part A: Applied Science and Manufacturing. 188.2025, January, 11 p., 108533.

Research output: Contribution to journal › Article › Research › peer-review

Nanoscale stress and microstructure gradients across a buckled Mo-Cu bilayer: Cu self-annealing triggered by interface delamination

Lassnig, A., Todt, J., Tkadletz, M., Žák, S., Mitterer, C., Medjahed, A. A., Burghammer, M., Keckes, J., Cordill, M. J. & Meindlhumer, M., 15 Oct 2024, In: Acta Materialia. 283.2025, 15 January, 15 p., 120465.

Research output: Contribution to journal › Article › Research › peer-review

Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

Edalati, K., Ahmed, A. Q., Akrami, S., Ameyama, K., Aptukov, V., Asfandiyarov, R. N., Ashida, M., Astanin, V., Bachmaier, A., Beloshenko, V. A., Bobruk, E. V., Bryła, K., Cabrera, J. M., Carvalho, A. P., Chinh, N. Q., Choi, I.-C., Chulist, R., Cubero-Sesin, J. M., Davidan, G. & Demirtas, M. & 102 others, Divinski, S., Durst, K., Dvorak, J., Edalati, P., Emura, S., Enikeev, N. A., Faraji, G., Figueiredo, R. B., Floriano, R., Fouladvind, M., Fruchart, D., Fuji, M., Fujiwara, H., Gajdics, M., Gheorghe, D., Gondek, L., González-Hernández, J. E., Gornakova, A., Grosdidier, T., Gubicza, J., Gunderov, D., He, L., Higuera, O. F., Hirosawa, S., Hohenwarter, A., Horita, Z., Horky, J., Huang, Y., Huot, J., Ikoma, Y., Ishihara, T., Ivanisenko, J., Jang, J.-I., Jorge Jr, A. M., Kawabata-Ota, M., Kawasaki, M., Khelfa, T., Kobayashi, J., Kommel, L., Korneva, A., Král, P., Kudriashova, N., Kuramoto, S., Langdon, T. G., Lee, D.-H., Levitas, V. I., Li, C., Li, H.-W., Li, Y., Li, Z., Lin, H.-J., Liss, K.-D., Liu, Y., Cardona, D. M., Matsuda, K., Mazilkin, A., Mine, Y., Miyamoto, H., Moon, S.-C., Müller, T., Munoz, J. A., Murashkin, M. Y., Naeem, M., Novelli, M., Olasz, D., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., de Rango, P., Renk, O., Retraint, D., Révész, Á., Roche, V., Rodriguez-Calvillo, P., Romero-Resendiz, L., Sauvage, X., Sawaguchi, T., Sena, H., Shahmir, H., Shi, X., Sklenicka, V., Skrotzki, W., Skryabina, N., Staab, F., Straumal, B. B., Sun, Z., Szczerba, M., Takizawa, Y., Tang, Y., Valiev, R. Z., Vozniak, A., Voznyak, A., Wang, B., Wang, J. T., Wilde, G., Zhang, F., Zhang, M., Zhang, P., Zhou, J., Zhu, X. & Zhu, Y. T., 15 Oct 2024, In: Journal of alloys and compounds. 1002.2024, 15 October, 150 p., 174667.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced thermomechanical fatigue resistance in W10Re alloys: Microstructural and surface engineering approaches

Sommerauer, M., Seligmann, B., Gottlieb, H., Hohenwarter, A., You, J.-H., Bostrom, N., Pippan, R., Siller, M. & Maier-Kiener, V., 11 Oct 2024, In: Nuclear Materials and Energy. 41.2024, December, 11 p., 101769.

Research output: Contribution to journal › Article › Research › peer-review

Machine learning assisted calibration of PVT simulations for SiC crystal growth

Taucher, L., Ramadan, Z., Hammer, R., Obermüller, T., Auer, P. & Romaner, L., 10 Oct 2024, In: CrystEngComm. 44.2024, 26, p. 6322-6335 14 p.

Research output: Contribution to journal › Article › Research › peer-review

Unveiling the Effect of Grain Size on Biodegradation of Magnesium

Medeiros, M. P., Lopes, D. R., Carvalho, A. P., Hohenwarter, A., Kawasaki, M., Cupertino-Malheiros, L. & Figueiredo, R. B., 4 Oct 2024, In: Advanced Engineering Materials. 26.2024, 22, 9 p., 2401605.

Research output: Contribution to journal › Article › Research › peer-review

Hydrogen induced changes in the phase composition and micro-structure of downhole cements: Fundamental research within the context of underground hydrogen storage

Sammer, T., Kostoglou, N., Ravi, K. & Raith, J. G., 3 Oct 2024, In: International Journal of Hydrogen Energy. 89.2024, 4, p. 1166–1175 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Backside metallization affects residual stress and bending strength of the recast layer in laser-diced Si

Ziegelwanger, T., Reisinger, M., Matoy, K., Medjahed, A. A., Zalesak, J., Gruber, M., Meindlhumer, M. & Keckes, J., Oct 2024, In: Materials Science in Semiconductor Processing. 181, 108579.

Research output: Contribution to journal › Article › Research › peer-review

Editorial for the Special Issue on the Occasion of Reinhard Pippan's 70th Birthday: Celebrating a Legacy of Innovation and Excellence in Material Science

Kiener, D. & Hohenwarter, A., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 4 p., 2401772.

Research output: Contribution to journal › Editorial › peer-review

Fracture Toughness Investigations of an Ion-Irradiated Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

Moschetti, M., Hohenwarter, A., Alfreider, M., Couzinié, J.-P., Wei, T., Davis, J., Xu, A., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 9 p., 2400541.

Research output: Contribution to journal › Article › Research › peer-review

Investigation of Phase Transformations and Ordering Mechanisms in a Pd–Cu–Ag–Ru Alloy

Lumper, L., Fecher, J., Stark, A. & Maier-Kiener, V., Oct 2024, In: Advanced engineering materials. 26.2024, 19, 10 p., 2400255.

Research output: Contribution to journal › Article › Research › peer-review