Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

Research output: Contribution to journal › Article › Research › peer-review

Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

Research output: Contribution to journal › Article › Research › peer-review

Towards high-strength electrolyte-supported solid oxide fuel cells

Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

Research output: Contribution to journal › Article › Research › peer-review

Understanding the lower fracture resistance of cold sintered ceramics

Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

Research output: Contribution to journal › Article › Research › peer-review

20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

Research output: Contribution to journal › Article › Research › peer-review

Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy

Huang, Y., Chen, Z., Meindlhumer, M., Hahn, R., Holec, D., Leiner, T., Maier-Kiener, V., Zheng, Y., Zhang, Z., Hatzenbichler, L., Riedl, H., Mitterer, C. & Zhang, Z., 23 Jan 2025, In: Acta Materialia. 286.2025, 1 March, 15 p., 120774.

Research output: Contribution to journal › Article › Research › peer-review

Effects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument study

Schiester, M., Waldl, H., Rice, K. P., Hans, M., Primetzhofer, D., Schalk, N. & Tkadletz, M., 17 Jan 2025, In: Ultramicroscopy. 270.2025, April, 10 p., 114105.

Research output: Contribution to journal › Article › Research › peer-review

Ab-initio grain boundary thermodynamics beyond the dilute limit

Spitaler, T., Scheiber, D., Dösinger, C. A., Hodapp, M. & Romaner, L., 14 Jan 2025, In: Acta materialia. 286.2025, 1 March, 13 p., 120725.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural features and hydrogen diffusion in bcc FeCr alloys: A comparison between the Kelvin probe- and nanohardness based-methods

Rao, J., Sun, B., Ganapathi, A., Dong, X., Hohenwarter, A., Wu, C. H., Rohwerder, M., Dehm, G. & Duarte, M. J., 14 Jan 2025, In: International Journal of Hydrogen Energy. 102.2025, 10 February, p. 1103-1115 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

Research output: Contribution to journal › Article › Research › peer-review

Synergistic precipitation reactions in a novel high-temperature Ti-alloy

Farabi, E., He, X., Obersteiner, D., Musi, M., Neves, J., Klein, T. & Primig, S., 9 Jan 2025, In: Scripta materialia. 259.2025, 1 April, 7 p., 116543.

Research output: Contribution to journal › Article › Research › peer-review

Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

Research output: Contribution to journal › Article › Research › peer-review

Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitride

Nayak, G. K., Srinivasan, P., Todt, J., Daniel, R., Nicolini, P. & Holec, D., 6 Jan 2025, In: Computational materials science. 249.2025, 5 February, 11 p., 113629.

Research output: Contribution to journal › Article › Research › peer-review

Superhydrophilic Titania Coatings on Glass Substrates via the Hydrosol Approach

Theodorakopoulos, G. V., Arfanis, M., Mouti, N.-M., Kaidatzis, A., Mitterer, C., Giannakopoulos, K. & Falaras, P., 6 Jan 2025, In: Surfaces. 8.2025, 1, 16 p.

Research output: Contribution to journal › Article › Research › peer-review

Contact damage response of alumina-based layered architectures under different loading configurations

Schlacher, J. C., Stücklberger, F., Jabr, A. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 3, 8 p., 117037.

Research output: Contribution to journal › Article › Research › peer-review

Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

Najafzadehkhoee, A., Jabr, A., Talimian, A., Papsik, R., Drdlik, D., Maca, K., Galusek, D. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 4, 9 p., 117071.

Research output: Contribution to journal › Article › Research › peer-review

In Vivo Assessment on Freeze-Cast Calcium Phosphate-Based Scaffolds with a Selective Cell/Tissue Ingrowth

Pejchalová, L., Pejchal, J., Roleček, J., Vojníková, M., Chlup, Z., Mařák, V., González-Sánchez, M., Čížková, J. & Salamon, D., 2025, In: ACS Applied Materials and Interfaces. 16.2024, 43, p. 58326-58336 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Reliable Atom Probe Tomography of Cu Nanoparticles Through Tailored Encapsulation by an Electrodeposited Film

Cicek, A., Knabl, F., Schiester, M., Waldl, H., Rafailovic, L., Tkadletz, M. & Mitterer, C., 30 Dec 2024, In: Nanomaterials. 15.2025, 1, 13 p., 43.

Research output: Contribution to journal › Article › Research › peer-review

Crystallization of Fe₇₄Mo₄P₁₀C_7.5B_2.5Si₂ metallic glass: Insights from in-situ synchrotron diffraction and Flash DSC

Römer, F., Ramasamy, P., Steffny, I., Stoica, M., Lienert, U., Quick, C. R., Hegedüs, Z., Eckert, J. & Spieckermann, F., 27 Dec 2024, (E-pub ahead of print) In: Materials today advances. 25.2025, March, 7 p., 100550.

Research output: Contribution to journal › Article › Research › peer-review

Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloying

Moravcik, I., Alfreider, M., Wurster, S., Schretter, L., Zadera, A., Pernica, V., Čamek, L., Eckert, J. & Hohenwarter, A., 27 Dec 2024, (E-pub ahead of print) In: Materials Science and Engineering: A. 924.2025, February, 14 p., 147757.

Research output: Contribution to journal › Article › Research › peer-review

Unusual hardness and string-like structures relaxation of metallic glass investigated by in-situ synchrotron radiation

Zhang, N. Z., Spieckermann, F., Yuan, X. D., Şopu, D., Jin, X., Sun, K., Mendez, A., Yu, P., Wang, G. & Eckert, J., 25 Dec 2024, (E-pub ahead of print) In: Journal of alloys and compounds. 1010.2025, 5 January, 7 p., 178287.

Research output: Contribution to journal › Article › Research › peer-review

Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment

Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagram

Schrittwieser, D., Marin Morales, D., Pahr, H., Lumper-Wimler, L., Glushko, O. & Schnitzer, R., 18 Dec 2024, In: Welding in the world. ??? Stand: 4. Februar 2025, ??? Stand: 4. Februar 2025, 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced hydrogen evolution via nano-patterned Pt-based metallic glass and dynamic copper oxide foam formation

Cai, F.-F., Sarac, B., Akman, A., Londoño, J. J., Gümrükcü, S., Schweiger, L., Hantusch, M., Schroers, J., Blatter, A., Gebert, A., Spieckermann, F. & Eckert, J., 12 Dec 2024, In: Materials and Design. 249.2025, January, 11 p., 113530.

Research output: Contribution to journal › Article › Research › peer-review

On the impact of nitrogen and aluminum doping on silicon carbide polytype stability: Insights from first principle calculations

Rajabzadeh, Z., Hammer, R. & Romaner, L., 10 Dec 2024, In: Journal of the American Ceramic Society. 108.2024, 4, 9 p., e20284.

Research output: Contribution to journal › Article › Research › peer-review

Lead-free dielectric thin films: Synthesis of Ag(Nb1−xTax)O3 via reactive dc magnetron sputtering

Kölbl, L., Mehrabi, M., Griesser, T., Munnik, F. & Mitterer, C., 6 Dec 2024, In: Journal of vacuum science & technology / A (JVST). 43.2024, 1, 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterization

Tang, J., Renk, O. & Tkadletz, M., 6 Dec 2024, In: Materials characterization. 219.2025, January, 8 p., 114618.

Research output: Contribution to journal › Article › Research › peer-review

Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphology

Knabl, F., Gutnik, D., Patil, P., Bandl, C., Vermeij, T., Pichler, C. M., Putz, B. & Mitterer, C., Dec 2024, In: Vacuum. 230, 113724.

Research output: Contribution to journal › Article › Research › peer-review

Scaffold microstructure evolution via freeze-casting and hydrothermal phase transformation of calcium phosphate

Siddiqui, M. & Salamon, D., Dec 2024, In: Journal of the American Ceramic Society. 107, 12, p. 7994-8006 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Towards high strength SrTiO₃-based composites fabricated at room temperature

Jabr, A., Kuzmić, N., Škapin, S. D., Jantunen, H., Nelo, M., Spreitzer, M. & Bermejo, R., Dec 2024, In: Journal of the European Ceramic Society. 44, 15, 116782.

Research output: Contribution to journal › Article › Research › peer-review

Magnetic moments in CrN-based systems are robust: An ab initio study of alloys and superlattices

Matas, M., Mayrhofer, P. H. & Holec, D., 23 Nov 2024, In: Surface & coatings technology. 496.2025, 15 January, 8 p., 131540.

Research output: Contribution to journal › Article › Research › peer-review

Exploring the fracture toughness and fatigue crack growth behavior of MoRe alloys

Pillmeier, S., Žák, S., Pippan, R., Eckert, J. & Hohenwarter, A., 19 Nov 2024, In: International Journal of Refractory Metals and Hard Materials. 127.2025, February, 10 p., 106969.

Research output: Contribution to journal › Article › Research › peer-review

Descriptors based on the density of states for efficient machine learning of grain-boundary segregation energies

Dösinger, C. A., Hammerschmidt, T., Peil, O. E., Scheiber, D. & Romaner, L., 13 Nov 2024, In: Computational materials science. 247.2025, 31 January 2025, 10 p., 113493.

Research output: Contribution to journal › Article › Research › peer-review

Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

Research output: Contribution to journal › Article › Research › peer-review

Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysis

Shi, X., Misch, D., Skerbisch, L., Sachsenhofer, R. F., Žák, S., Cordill, M. & Kiener, D., Nov 2024, In: Marine and petroleum geology. 169.2024, November, 16 p., 107083.

Research output: Contribution to journal › Article › Research › peer-review

Perspective on pathways towards responsible surface engineering

Hans, M., Schneider, J. M., Matthews, A. & Mitterer, C., 21 Oct 2024, In: Surface & coatings technology. 494.2024, 30 October, Part 2, 14 p., 131486.

Research output: Contribution to journal › Article › Research › peer-review

Revealing the embrittlement phenomena after post-weld heat treatment of high-strength weld metal using high-resolution microscopy

Schrittwieser, D., Pahr, H., Musi, M., Landefeld, A., Glushko, O. & Schnitzer, R., 21 Oct 2024, In: Journal of Materials Research and Technology. 33.2024, November-December, p. 5289-5298 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Strong high-density composites from wheat straw

Neudecker, F., Veigel, S., Bodner, S., Keckes, J., Duchoslav, J., Stifter, D. & Gindl-Altmutter, W., 18 Oct 2024, In: Composites Part A: Applied Science and Manufacturing. 188.2025, January, 11 p., 108533.

Research output: Contribution to journal › Article › Research › peer-review

Nanoscale stress and microstructure gradients across a buckled Mo-Cu bilayer: Cu self-annealing triggered by interface delamination

Lassnig, A., Todt, J., Tkadletz, M., Žák, S., Mitterer, C., Medjahed, A. A., Burghammer, M., Keckes, J., Cordill, M. J. & Meindlhumer, M., 15 Oct 2024, In: Acta Materialia. 283.2025, 15 January, 15 p., 120465.

Research output: Contribution to journal › Article › Research › peer-review

Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

Edalati, K., Ahmed, A. Q., Akrami, S., Ameyama, K., Aptukov, V., Asfandiyarov, R. N., Ashida, M., Astanin, V., Bachmaier, A., Beloshenko, V. A., Bobruk, E. V., Bryła, K., Cabrera, J. M., Carvalho, A. P., Chinh, N. Q., Choi, I.-C., Chulist, R., Cubero-Sesin, J. M., Davidan, G. & Demirtas, M. & 102 others, Divinski, S., Durst, K., Dvorak, J., Edalati, P., Emura, S., Enikeev, N. A., Faraji, G., Figueiredo, R. B., Floriano, R., Fouladvind, M., Fruchart, D., Fuji, M., Fujiwara, H., Gajdics, M., Gheorghe, D., Gondek, L., González-Hernández, J. E., Gornakova, A., Grosdidier, T., Gubicza, J., Gunderov, D., He, L., Higuera, O. F., Hirosawa, S., Hohenwarter, A., Horita, Z., Horky, J., Huang, Y., Huot, J., Ikoma, Y., Ishihara, T., Ivanisenko, J., Jang, J.-I., Jorge Jr, A. M., Kawabata-Ota, M., Kawasaki, M., Khelfa, T., Kobayashi, J., Kommel, L., Korneva, A., Král, P., Kudriashova, N., Kuramoto, S., Langdon, T. G., Lee, D.-H., Levitas, V. I., Li, C., Li, H.-W., Li, Y., Li, Z., Lin, H.-J., Liss, K.-D., Liu, Y., Cardona, D. M., Matsuda, K., Mazilkin, A., Mine, Y., Miyamoto, H., Moon, S.-C., Müller, T., Munoz, J. A., Murashkin, M. Y., Naeem, M., Novelli, M., Olasz, D., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., de Rango, P., Renk, O., Retraint, D., Révész, Á., Roche, V., Rodriguez-Calvillo, P., Romero-Resendiz, L., Sauvage, X., Sawaguchi, T., Sena, H., Shahmir, H., Shi, X., Sklenicka, V., Skrotzki, W., Skryabina, N., Staab, F., Straumal, B. B., Sun, Z., Szczerba, M., Takizawa, Y., Tang, Y., Valiev, R. Z., Vozniak, A., Voznyak, A., Wang, B., Wang, J. T., Wilde, G., Zhang, F., Zhang, M., Zhang, P., Zhou, J., Zhu, X. & Zhu, Y. T., 15 Oct 2024, In: Journal of alloys and compounds. 1002.2024, 15 October, 150 p., 174667.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced thermomechanical fatigue resistance in W10Re alloys: Microstructural and surface engineering approaches

Sommerauer, M., Seligmann, B., Gottlieb, H., Hohenwarter, A., You, J.-H., Bostrom, N., Pippan, R., Siller, M. & Maier-Kiener, V., 11 Oct 2024, In: Nuclear Materials and Energy. 41.2024, December, 11 p., 101769.

Research output: Contribution to journal › Article › Research › peer-review

Machine learning assisted calibration of PVT simulations for SiC crystal growth

Taucher, L., Ramadan, Z., Hammer, R., Obermüller, T., Auer, P. & Romaner, L., 10 Oct 2024, In: CrystEngComm. 44.2024, 26, p. 6322-6335 14 p.

Research output: Contribution to journal › Article › Research › peer-review

Unveiling the Effect of Grain Size on Biodegradation of Magnesium

Medeiros, M. P., Lopes, D. R., Carvalho, A. P., Hohenwarter, A., Kawasaki, M., Cupertino-Malheiros, L. & Figueiredo, R. B., 4 Oct 2024, In: Advanced Engineering Materials. 26.2024, 22, 9 p., 2401605.

Research output: Contribution to journal › Article › Research › peer-review

Hydrogen induced changes in the phase composition and micro-structure of downhole cements: Fundamental research within the context of underground hydrogen storage

Sammer, T., Kostoglou, N., Ravi, K. & Raith, J. G., 3 Oct 2024, In: International Journal of Hydrogen Energy. 89.2024, 4, p. 1166–1175 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Backside metallization affects residual stress and bending strength of the recast layer in laser-diced Si

Ziegelwanger, T., Reisinger, M., Matoy, K., Medjahed, A. A., Zalesak, J., Gruber, M., Meindlhumer, M. & Keckes, J., Oct 2024, In: Materials Science in Semiconductor Processing. 181, 108579.

Research output: Contribution to journal › Article › Research › peer-review

Editorial for the Special Issue on the Occasion of Reinhard Pippan's 70th Birthday: Celebrating a Legacy of Innovation and Excellence in Material Science

Kiener, D. & Hohenwarter, A., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 4 p., 2401772.

Research output: Contribution to journal › Editorial › peer-review

Fracture Toughness Investigations of an Ion-Irradiated Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

Moschetti, M., Hohenwarter, A., Alfreider, M., Couzinié, J.-P., Wei, T., Davis, J., Xu, A., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 9 p., 2400541.

Research output: Contribution to journal › Article › Research › peer-review

Investigation of Phase Transformations and Ordering Mechanisms in a Pd–Cu–Ag–Ru Alloy

Lumper, L., Fecher, J., Stark, A. & Maier-Kiener, V., Oct 2024, In: Advanced engineering materials. 26.2024, 19, 10 p., 2400255.

Research output: Contribution to journal › Article › Research › peer-review

Thermal shock resistant 3D-printed ceramic components through spatially tailored porosity

Schlacher, J., Bastos Mateus, L., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 25 Sept 2024, In: Additive Manufacturing. 96, 104582.

Research output: Contribution to journal › Article › Research › peer-review

Single-stack multilayer infrared mirrors with selectable higher-order interference peaks

Meisels, R., Kuchar, F., Manara, J., Arduini, M., Schulz, U., Peters, J. O., Gartner, T. M., Mitterer, C. & Paris, O., 20 Sept 2024, In: Applied Optics. 63.2024, 27, p. 7268-7277 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Understanding the origin of lithium dendrite branching in Li_6.5La₃Zr_1.5Ta_0.5O₁₂ solid-state electrolyte via microscopy measurements

Yildirim, C., Flatscher, F., Ganschow, S., Lassnig, A., Gammer, C., Todt, J., Keckes, J. & Rettenwander, D., 18 Sept 2024, (E-pub ahead of print) In: Nature Communications. 15.2024, 1, 8 p., 8207.

Research output: Contribution to journal › Article › Research › peer-review

Sputter deposited silver niobate thin films: Pathway towards phase purity

Kölbl, L., Kobald, A., Griesser, T., Munnik, F. & Mitterer, C., 15 Sept 2024, In: Thin solid films. 804.2024, 15 September, 9 p., 140505.

Research output: Contribution to journal › Article › Research › peer-review

Chemical vapor deposited TiCN/TiC multilayer coatings: On the interplay between coating architecture and mechanical properties

Kainz, C., Tkadletz, M., Maier-Kiener, V., Völker, B., Burtscher, M., Waldl, H., Schiester, M., Thurner, J., Czettl, C. & Schalk, N., 14 Sept 2024, In: International journal of refractory metals & hard materials. 125.2024, December, 6 p., 106890.

Research output: Contribution to journal › Article › Research › peer-review

Enhance hydrogen storage in lightweight solid-state systems based on Poly (vinylnaphthalene)

Sharifian, M., Kern, W., Rieß, G. & Kostoglou, N., 10 Sept 2024, In: International Journal of Hydrogen Energy . 87.2024, 18 October, p. 713-721 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Equiaxed microstructure design enables strength-ductility synergy in the eutectic high-entropy alloy

Zhang, Z., Huang, Y., Xu, Q., Fellner, S., Hohenwarter, A., Wurster, S., Song, K., Gammer, C. & Eckert, J., 10 Sept 2024, In: Journal of Materials Research and Technology. 33.2024, 6, p. 103-114 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Strain Field Around Individual Dislocations Controls Failure

Gammer, C., Issa, I., Minor, A. M., Ritchie, R. O. & Kiener, D., 6 Sept 2024, In: Small Methods. 8.2024, 12, 7 p., 2400654.

Research output: Contribution to journal › Article › Research › peer-review

Microscale manipulation of bond exchange reactions in photocurable vitrimers with a covalently attachable photoacid generator

Korotkov, R., Alabiso, W., Jelinek, A., Schmallegger, M., Li, Y., Schlögl, S. & Rossegger, E., 3 Sept 2024, In: Chemical science. 15.2024, 39, p. 16271-16280 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Biaxial bending strength testing of uniaxially curved thin plates using a modified ball on three balls test

Supancic, P., Maurer, F. & Danzer, R., 1 Sept 2024, In: Journal of non-crystalline solids. 639, 123067.

Research output: Contribution to journal › Article › Research › peer-review

Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallaby

Wilmers, J., Wurmshuber, M., Gescher, C., Graupp, C. M., Kiener, D. & Bargmann, S., 1 Sept 2024, In: Acta biomaterialia. 185.2024, 1 September, p. 254-265 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via Xolography

Sänger, J. C., König, N. F., De Marzi, A., Zocca, A., Franchin, G., Bermejo, R., Colombo, P. & Günster, J., Sept 2024, In: Open ceramics. 19, 100655.

Research output: Contribution to journal › Article › Research › peer-review

Tensile strength prediction of steel sheets: An insight into data-driven models, dimensionality reduction, and feature importance

Millner, G., Mücke, M., Romaner, L. & Scheiber, D., 24 Aug 2024, In: Modelling and simulation in materials science and engineering. 32.2024, 7, 23 p., 075004.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure evolution and mechanical properties of a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy processed by high-pressure torsion

Zhang, Z., Fellner, S., Hohenwarter, A., Renk, O., Huang, Y., Chen, Z., Song, K., Li, C., Gammer, C. & Eckert, J., 23 Aug 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 914.2024, November, 12 p., 147139.

Research output: Contribution to journal › Article › Research › peer-review

Novel Fe-Mo intermetallic composite synthesized via diffusional-displacive mixed-mode transformation

Varanasi, R. S., Srikakulapu, K., Utsumi, R., Saitoh, H., Schnitzer, R., Akiyama, E. & Koyama, M., 18 Aug 2024, In: Materials characterization. 216.2024, October, 10 p., 114287.

Research output: Contribution to journal › Article › Research › peer-review

Coupling structural, chemical composition and stress fluctuations with relaxation dynamics in metallic glasses

Şopu, D., Yuan, X., Spieckermann, F. & Eckert, J., 15 Aug 2024, In: Acta Materialia. 275.2024, 15 August, 7 p., 120033.

Research output: Contribution to journal › Article › Research › peer-review

Mapping the composite nature of clay matrix in mudstones: integrated micromechanics profiling by high-throughput nanoindentation and data analysis

Shi, X., Misch, D., Žák, S., Cordill, M. & Kiener, D., 14 Aug 2024, In: Geomechanics and geophysics for geo-energy and geo-resources. 10.2024, 25 p., 139.

Research output: Contribution to journal › Article › Research › peer-review

Insight into Carbon Black and Silica Fume as Cement Additives for Geoenergy Wells: Linking Mineralogy to Mechanical and Physical Properties

Sammer, T., Nasiri, A., Kostoglou, N., Ravi, K. & Raith, J., 8 Aug 2024, In: C – journal of carbon research. 10.2024, 3, 22 p., 71.

Research output: Contribution to journal › Article › Research › peer-review

Fatigue Crack Propagation Across the Multiple Length Scales of Technically Relevant Metallic Materials

Hohenwarter, A., Leitner, T. & Pippan, R., 5 Aug 2024, In: Annual review of materials research. 54.2024, p. 223-246 24 p.

Research output: Contribution to journal › Review article › peer-review

Glass and nanocrystalline phase formation in CuZrAg alloys: Insights from combinatorial thin film libraries studied by mapping synchrotron X-ray diffraction

Putz, B., Milkovič, O., Mohanty, G., Ipach, R., Pethö, L., Milkovičová, J., Saksl, K. & Michler, J., Aug 2024, In: Materials and Design. 244, 113144.

Research output: Contribution to journal › Article › Research › peer-review

On the fatigue crack growth behavior of nanocrystalline CrMnFeCoNi

Pillmeier, S., Burtscher, M., Laplanche, G., Pippan, R., Eckert, J. & Hohenwarter, A., 31 Jul 2024, In: International Journal of Fatigue. 188.2024, November, 11 p., 108530.

Research output: Contribution to journal › Article › Research › peer-review

Grain boundary segregation for the Fe-P system: Insights from atomistic modeling and Bayesian inference

Reichmann, A., Tuchinda, N., Dösinger, C. A., Scheiber, D., Razumovskiy, V. I., Peil, O. E., Matson, T. P., Schuh, C. A. & Romaner, L., 26 Jul 2024, In: Acta materialia. 279.2024, 15 October, 11 p., 120215.

Research output: Contribution to journal › Article › Research › peer-review

State-of-the-art and future directions of fs-laser assisted specimen preparation techniques for atom probe tomography measurements

Tkadletz, M., Schiester, M., Renk, O. & Schalk, N., 24 Jul 2024, In: Microscopy and microanalysis. 30.2024, Supplement 1, p. 89-90 2 p.

Research output: Contribution to journal › Article › Research › peer-review

Hydrogen penetration into the NiTi superelastic alloy investigated in-situ by synchrotron diffraction experiments

Weiser, A., Todt, J., Holcova, J., Zalezak, T., Paulik, A., Holec, D., Jary, M., Zobac, O., Mrazek, J., Frenzel, J., Keckes, J. & Dlouhý, A., 23 Jul 2024, In: Acta materialia. 277.2024, 15 September, 11 p., 120217.

Research output: Contribution to journal › Article › Research › peer-review

Ab initio framework for deciphering trade-off relationships in multicomponent alloys

Moitzi, F., Romaner, L., Ruban, A. V., Hodapp, M. & Peil, O. E., 16 Jul 2024, In: npj computational materials. 2024, 10, 16 p., 152.

Research output: Contribution to journal › Article › Research › peer-review

Optimizing methane plasma pyrolysis for instant hydrogen and high-quality carbon production

Daghagheleh, O., Schenk, J., Zheng, H., Zarl, M. A., Farkas, M., Ernst, D., Kieush, L., Lehner, M., Kostoglou, N. & Obenaus-Emler, R., 14 Jul 2024, In: International Journal of Hydrogen Energy . 79.2024, 19 August, p. 1406-1417 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloys

Willenshofer, P., Santa Rosa Coradini, D., Renk, O., Uggowitzer, P., Tunes, M. A. & Pogatscher, S., 11 Jul 2024, (E-pub ahead of print) In: Materials characterization. 215.2024, September, 8 p., 114154.

Research output: Contribution to journal › Article › Research › peer-review

How to catch a shear band and explain plasticity of metallic glasses with continuum mechanics

Glushko, O., Pippan, R., Şopu, D., Mitterer, C. & Eckert, J., 3 Jul 2024, In: Nature Communications. 2024, 15, 11 p., 5601.

Research output: Contribution to journal › Article › Research › peer-review

Possible charge ordering and anomalous transport in graphene/graphene quantum dot heterostructure

Roy, R., Holec, D., Michal, L., Hemzal, D., Sarkar, S., Kumar, G. S., Nečas, D., Dhankhar, M., Kaushik, P., Gómez, I. J. & Zajíčková, L., 3 Jul 2024, In: Journal of physics (Condensed matter). 2024, 36, 12 p., 265601.

Research output: Contribution to journal › Article › Research › peer-review

Unveiling the mechanism of deformation‑induced supersaturation

Kormout, K. S., Romaner, L., Scheiber, D., Zeiler, S., Pippan, R. & Bachmaier, A., 2 Jul 2024, In: Scientific reports (e-only). 2024, 14, 7 p., 15247.

Research output: Contribution to journal › Article › Research › peer-review

Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process

Schimbäck, D., Kaserer, L., Mair, P., Mohebbi, M. S., Staron, P., Maier-Kiener, V., Letofsky-Papst, I., Kremmer, T., Palm, F., Montes, I., Höppel, H. W., Leichtfried, G. J. & Pogatscher, S., Jul 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 905.2024, July, 10 p., 146102.

Research output: Contribution to journal › Article › Research › peer-review

Automatic and time-resolved determination of fracture characteristics from in situ experiments

Schmuck, K. S., Antenreiter, M., Alfreider, M. & Kiener, D., Jul 2024, In: Materials & design. 243.2024, July, 12 p., 113038.

Research output: Contribution to journal › Article › Research › peer-review

Refined cyclic R-curve determination through residual crack tip stress reduction by annealing

Walch, L., Klünsner, T., Ressel, G., Marsoner, S. M., Pippan, R., Hackl, A., Leitner, H. & Hohenwarter, A., 27 Jun 2024, In: International Journal of Fatigue. 187.2024, October, 108480.

Research output: Contribution to journal › Article › Research › peer-review

Plasma-Treated Cobalt-Doped Nanoporous Graphene for Advanced Electrochemical Applications

Knabl, F., Kostoglou, N., Gupta, R. K., Tarat, A., Hinder, S. J., Baker, M., Rebholz, C. & Mitterer, C., 26 Jun 2024, In: C – journal of carbon research. 10.2024, 2, 12 p., 31.

Research output: Contribution to journal › Article › Research › peer-review

High-Throughput First-Principles Calculations and Machine Learning of Grain Boundary Segregation in Metals

Scheiber, D., Razumovskiy, V. I., Peil, O. E. & Romaner, L., 21 Jun 2024, In: Advanced engineering materials. 26.2024, 19, 18 p., 2400269.

Research output: Contribution to journal › Article › Research › peer-review

A new approach for in situ electrochemical nanoindentation: Side charging as a promising alternative

Zeiler, S., Jelinek, A., Terziyska, V., Schwaiger, R., Mitterer, C., Brinckmann, S. & Maier-Kiener, V., 14 Jun 2024, (E-pub ahead of print) In: Acta materialia. 276.2024, 1 September, 9 p., 120113.

Research output: Contribution to journal › Article › Research › peer-review

Saturation of grain fragmentation upon severe plastic Deformation: Fact or fiction?

Renk, O., Hohenwarter, A., Edalati, K. & Kapp, M. W., 14 Jun 2024, In: Advanced engineering materials. 26.2024, 19, 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical processing and thermal stability of the equiatomic high entropy alloy TiVZrNbHf under vacuum and hydrogen pressure

Schweiger, L., Römer, F., Gizer, G., Burtscher, M., Kiener, D., Pistidda, C., Schökel, A., Spieckermann, F. & Eckert, J., 10 Jun 2024, In: Applied physics letters. 124.2024, 24, 241903.

Research output: Contribution to journal › Article › Research › peer-review

Exploring Refinement Characteristics in FeTi–Cux Composites: A Study of Localization and Abrasion Constraints

Schweiger, L., Spieckermann, F., Buchebner, N., Keckes, J. F., Kiener, D. & Eckert, J., 8 Jun 2024, In: Advanced Engineering Materials. 26.2024, 19, 12 p., 2400593.

Research output: Contribution to journal › Article › Research › peer-review

Reshapable bio-based thiol-ene vitrimers for nanoimprint lithography: Advanced covalent adaptability for tunable surface properties

Sölle, B., Reisinger, D., Heupl, S., Jelinek, A., Schlögl, S. & Rossegger, E., 8 Jun 2024, (E-pub ahead of print) In: Reactive & functional polymers. 202.2024, September, 8 p., 105972.

Research output: Contribution to journal › Article › Research › peer-review

Energy Absorption and Beam Damage during Microfocus Synchrotron X-ray Diffraction

Stanko, Š. T., Schawe, J. E. K., Spieckermann, F., Eckert, J. & Löffler, J. F., 7 Jun 2024, In: The journal of physical chemistry letters. 15.2024, 24, p. 6286-6291 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Semi-analytical and experimental heat input study of additively manufactured Zr-based bulk metallic glass: Insights into nano- and global-scale relaxation and crystallization

Hadibeik Neishaboori, S., Gingl, E., Schretter, L., Bochtler, B., LI, J., Gammer, C., Hohenwarter, A., Spieckermann, F. & Eckert, J., 5 Jun 2024, In: Additive Manufacturing. 89.2024, 5 June, 15 p., 104295.

Research output: Contribution to journal › Article › Research › peer-review

Comparing the properties of cellulose nanofibrils from wood and bark of Norway spruce (Picea abies KARST.) and silver poplar (Populus alba L.)

Supriyadi, D., Bodner, S., Keckes, J., Gindl-Altmutter, W. & Veigel, S., 4 Jun 2024, (E-pub ahead of print) In: Carbohydrate polymer technologies and applications. 7.2024, June, 14 p., 100527.

Research output: Contribution to journal › Article › Research › peer-review

Materials science-based guidelines to develop robust hard thin film materials

Mayrhofer, P. H., Clemens, H. & Fischer, F.-D., 3 Jun 2024, In: Progress in materials science. 146.2024, December, 57 p., 101323.

Research output: Contribution to journal › Review article › peer-review

Ab initio study of oxygen vacancy filament formation at Ta/HfO2 interface

Zhang, D., Wang, J., Wu, Q., Du, Y. & Holec, D., Jun 2024, In: Surfaces and Interfaces. 49.2024, June, 11 p., 104418.

Research output: Contribution to journal › Article › Research › peer-review

Asymmetric supercapacitors based on biomass-derived porous activated carbon (PAC)/1D manganese oxide (MnO2) electrodes with high power and energy densities

Lee, Y.-S., Selvaraj, A. R., Kostoglou, N., Rebholz, C., Rajendiran, R., Raman, V., Kim, H., Rajesh, J. A., Nagulapati, V. M., Oh, T. H., Jerome, P. & Kim, S.-S., Jun 2024, In: Materials science and engineering B (Solid-state materials for advanced technology). 304.2024, June, 10 p., 117368.

Research output: Contribution to journal › Article › Research › peer-review

fs-laser preparation of half grid specimens for atom probe tomography and transmission electron microscopy

Tkadletz, M., Schiester, M., Waldl, H., Schusser, G., Krause, M. & Schalk, N., Jun 2024, In: Materials Today Communications. 39.2024, June, 6 p., 108672.

Research output: Contribution to journal › Article › Research › peer-review

Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

Research output: Contribution to journal › Article › Research › peer-review

Nanocomposite versus solid solution formation in the TiSiN system

Schalk, N., Moritz, Y., Nayak, G. K., Holec, D., Hugenschmidt, C., Burwitz, V. V., Mathes, L., Schiester, M., Saringer, C., Czettl, C., Pohler, M., Mitterer, C. & Tkadletz, M., 30 May 2024, (E-pub ahead of print) In: Acta materialia. 275.2024, 15 August, 10 p., 120063.

Research output: Contribution to journal › Article › Research › peer-review

Artificial thermal shock cracks in WRe – A proof of concept study

Sommerauer, M., Siller, M., Pippan, R., Bostrom, N. & Maier-Kiener, V., 29 May 2024, (E-pub ahead of print) In: Nuclear Materials and Energy. 39.2024, June, 8 p., 101685.

Research output: Contribution to journal › Article › Research › peer-review