Department Materials Science
Organisational unit: Departments and Institutes
Research output
- 2008
- Published
Milestone 1.3.1 "Improved wear protection (hardness >35GPa) for TiAlN or (Al,Cr,Y)N coatings"
Mayrhofer, P. H., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Milestone 1.3.2 "Oxidation protection of γ-TiAl base alloys by nanocomposite coatings (dwell time > 1000h at >= 850°C)"
Mayrhofer, P. H., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Milestone 1.3.3. "Oxidation protection of γ-TiAl base alloys by nanocomposite coatings (dwell time > 1000h at >= 850°C)"
Mayrhofer, P. H., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Milestone 3.2.3 "Demonstration of a self-organization process for increased mechanical strength in the coatings after exposure to thermal load during service of a coated part (for the last advanced coatings)"
Mayrhofer, P. H., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties
Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2008.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Modelling of the ferroic behaviour of a soft PZT-ceramic - Material properties for a constitutive law
Grünbichler, H., Kreith, J., Bermejo Moratinos, R. & Supancic, P., 2008, Global road map for ceramics. Second International Congress on ceramics. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Monte Carlo simulation of Weibull distribution of ceramic strength values
Ambrožič, M., Bermejo Moratinos, R., Supancic, P. & Kosmač, T., 2008, Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics. p. 19-22Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Nanometer-scaled lamellar microstructures in Ti–45Al–7.5Nb–(0; 0.5)C alloys and their influence on hardness
Cha, L., Scheu, C., Clemens, H., Chladil, H., Dehm, G., Gerling, R. & BARTELS, A., 2008, In: Intermetallics. 16, p. 868-875Research output: Contribution to journal › Article › Research › peer-review
- Published
Nano-scale mechanical and tribological properties of mineralized tissues
Guidoni, G. M., 2008Research output: Thesis › Doctoral Thesis
- Published
Near Conventional Forging of Titanium Aluminides
Kremmer, S., Chladil, H., Clemens, H., Otto, A. & Güther, V., 2008, Ti-2007 Science and Technology. p. 989-992Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
