Department Materials Science
Organisational unit: Departments and Institutes
Research output
- Published
Delayed failure behaviour of the ESIS silicon nitride reference material at 1200 °C in air
Kovalcík, J., Dusza, J., Lube, T. & Danzer, R., 1 Feb 2004, In: Materials letters. 58, 6, p. 871-875 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural Materials
Neudecker, F., Jakob, M., Bodner, S., Keckes, J., Buerstmayr, H. & Gindl-Altmutter, W., 4 May 2023, In: ACS Sustainable Chemistry and Engineering. 11.2023, 19, p. 7596-7604 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Deliverable 1.4.2 "Technological recipes for optimized Ti-free Al-containing intermetallic coatings to be used in the ultrahigh temperature range (850-1000°C)"
Mayrhofer, P. H., 2009Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Deliverable 1.7.5 "Selection of coatings showing enhanced thermal stability and hindered secondary phase transformation at 850°C compared to SoA TiN based coatings"
Mayrhofer, P. H., 2008Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Deliverable 3.1.5 "Provide temperature and temperature range data where distinct reactions in the investigated coatings occur, and amount of volatile elements if they appear"
Mayrhofer, P. H., 2009Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Deliverable 3.1.7 and 3.1.8 "Availability of suitable data on thermal stability of optimised coatings"
Mayrhofer, P. H., 2009Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Deliverable 3.2.1 : Results on mechanical properties as a function of temperature and time will be directly transferred to coaters IONBOND and HAUZER for coating process optimization.”
Mayrhofer, P. H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Deliverable 3.2.2 and 3.2.3 "Determination of a set of mechanical properties (Hardness, elastic modulus, fracture mechanism, friction coefficient…) for a new generation of coatings"
Mayrhofer, P. H., 2009Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Deliverable 3.3.1 "Data on the interdiffusion of the metal elements between coating layers as well as between coating and substrate of model systems identified at the mid-term meeting"
Mayrhofer, P. H., 2009Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Deliverable 6.4.2: “Phase stability of nitrides (TiAlN-Ag and similar)
Mayrhofer, P. H. & Hultman, L., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
