Chair of Simulation and Modelling of Metallurgical Processes (310)

Organisational unit: Chair

501 - 600 out of 624Page size: 100

Research output

  1. 2007
  2. Published

    Multiphase Modelling of the Slag Region in the ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Multiphase Modelling of the Slag Region in the ESR Process. p. 107-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys

    Gruber-Pretzler, M., Könözsy, L., Wu, M., Ludwig, A., Mathiesen, R. H., Schaffer, P. & Arnberg, L., 2007, Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys. p. 249-253

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel

    Mayer, F., Gruber-Pretzler, M., Wu, M. & Ludwig, A., 2007, Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel. p. 265-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot

    Könözsy, L., Mayer, F., Ishmurzin, A., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2007, Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Particle Entrapment in the Mushy Region of a Steel Continuous Caster

    Pfeiler, C., Thomas, B. G., Ludwig, A. & Wu, M., 2007, Particle Entrapment in the Mushy Region of a Steel Continuous Caster. p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Selected Numerical Investigations on ESR Process

    Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2007, The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling. p. 114-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2007, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38, p. 1465-1475

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2006
  14. Published

    Modeling of macrosegregations in DC casting of Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Kuhn, H. A. & Riedle, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 799-806 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    A three-phase model for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37.2006, 5, p. 1613-1631 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    A 3-Phase Model for Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37A, p. 1613-1631

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    About the formation of macrosegregations in continuous casting of Sn-Bronze

    Ludwig, A., Gruber-Pretzler, M., Wu, M., Kuhn, A. & Riedle, J., 2006, In: Fluid Dynamics and Materials Processing. 1, p. 285-300

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006, A Mixture Two-Phase Model for Macrosegregation during Solidification. p. 283-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006, A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze. p. 799-806

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Continous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2006, Continous Casting. p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Johannes, D., Wu, M. & Ludwig, A., 2006, Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys. p. 317-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Ludwig, A., Eck, S. & Mogeritsch, J., 2006, In: Materials Science Forum . p. 157-162

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Eck, S., Ludwig, A. & Mogeritsch, J., 2006, Materials Science Forum Vol. 508. p. 157-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In: Materials Science Forum . 508-509, p. 193-198

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Modeling Macrosegregation with a Multiphase Approach: Examples and Applications

    Wu, M. & Ludwig, A., 2006, In: JOM. 58, p. 16-18

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Modeling of Macrosegregations in Continous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2006, Continous Casting. p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  31. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-II. Application of model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-I. three phase flow model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - II. Application of model

    Wang, T., Li, T., Jin, J., Cao, Z., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model

    Wang, T., Zhang, X., Jin, J., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, A., Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 2006, Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy. p. 1071-1078

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Performance Studie zu Parallelrechnungen (Shared Memory vs. Cluster) von metallurgischen Mehrphasensimulationen

    Mayer, F., Wu, M., Ludwig, A., Gruber-Pretzler, M., Pfeiler, C., Hainke, M. & Otto, K.-J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Simulation of Particle and Bubble Motion in a Steel Continuous Caster

    Pfeiler, C., Ludwig, A. & Wu, M., 2006, TMS Proceedings. p. 737-744

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique

    Ludwig, A., Kharicha, A., Schuetzenhoefer, W. & Reiter, G., 2006, Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique. p. 985-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Strangguss von Bronze. Mehrphasensimulation: Modellierung und Simulation der auftretenden Phasen und Makroseigerungen beim Strangguss von CnSnP

    Gruber-Pretzler, M., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Strangguss von Stahl. Mehrphasensimulation: Bewegung von nicht metallischen Einschlüssen und Argonblasen im Bereich Tauchrohr/Kokille sowie den Einbau von Einschlüssen in die Strangschale

    Pfeiler, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Strangguss von Stahl – Mehrphasensimulation: Modellierung der deformationsindu-zierten Verringerung von Makroseigerungen sowie Schrumpfungsporositäten während der Softreduktion von Stahl

    Mayer, F., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. 2005
  44. Published

    A 3D Three-Phase Eulerian Solidification Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking. p. 273-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 485-489

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Construction of a radial heat flow apparatus for measuring the solid-liquid interface energies of ternary alloy systems

    Carreno Bodensiek, C. G., 2005, 188 p.

    Research output: Thesis › Doctoral Thesis

  47. Published

    Continuous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Hydrodynamic Study of a Rotating MHD Flow in a Cylindrical Cavity by Ultrasound Doppler Shift Method

    Kharicha, A., Alemany, A. & Bornas, D., 2005, In: International journal of engineering science. 43, p. 589-615

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 115-120

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model

    Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 79-84

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Modeling of Macrosegregations in Continuous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model

    Wang, T., Wu, M., Ludwig, A., Abondano, M., Pustal, B. & Bührig-Polaczek, A., 2005, In: International journal of cast metals research. 18, p. 221-228

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Numerical Description of Particle and Bubble Motion in the Submerged Entry Nozzle Region during Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, STEELSIM 2005. p. 231-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Numerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed Solidification

    Wu, M., Ludwig, A. & Luo, J., 2005, In: Materials Science Forum . 475-479, p. 2725-2730

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    On Distortions and Gap Formation during Solidification and Subsequent Cooling of a Cylindrical Casting

    Ludwig, A., Kron, J., Bellet, M., Pustal, B., Fredrikson, H. & Wendt, J., 2005, In: International journal of cast metals research. p. 295-310

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    On the Impact of Macroscopic Phase Separation on Solidification Microstructures

    Wu, M., Ludwig, A., Pelzer, M. & Postl, U., 2005, In: Advanced engineering materials. 7-9, p. 846-851

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Reduction of Vanadium-oxide monolayer structures

    Schoiswohl, J., Surnev, S., Sock, M., Eck, S., Kresse, G., Ramsey, M. G. & Netzer, F. P., 2005, In: Physical review : B, Condensed matter and materials physics. 71, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Simulation of Cooling Channel Rheocasting Process of A356 Aluminium Alloy Using a Three-Phase Volume Averaging Model

    Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2005, In: Transactions of Nonferrous Metals Society of China. 15, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Simulation of droplet formation during DC Electroslag-remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking”. p. 343-360

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations

    Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Vanadium oxide nanostructures on Rh(111): Promotion effect of CO adsorption and oxidation

    Schoiswohl, J., Eck, S., Ramsey, M. G., Andersen, J. N., Surnev, S. & Netzer, F. P., 2005, In: Surface Science. 580, p. 122-136

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2004
  66. Published

    Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation

    Kron, J., Bellet, M., Ludwig, A., Pustal, B., Wendt, J. & Fredriksson, H., 31 Dec 2004, In: International journal of cast metals research. 17.2004, 5, p. 295-310 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    About the interactions between thermo-solutal convection, shrinkage flow and grain sedimentation

    Ludwig, A., Wu, M., Wang, T. & Bührig-Polaczek, A., 2004, Computational Modeling and Simulation of Materials, III, Part B.. p. 491-502

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Atomic Level growth study of vanadium oxide nanostructures on Rh(111)

    Schoiswohl, J., Sock, M., Eck, S., Surnev, S., Ramsey, M. G., Netzer, F. P. & Kresse, G., 2004, In: Physical review : B, Condensed matter and materials physics. 69, p. 1-15

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Chapter 23: Grain Sedimentation and Melt Convection Phenomena during Globular Solidification

    Wu, M., Ludwig, A. & Bührig-Polaczek, A., 2004, Solidification and Crystallization. p. 204-212

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Chapter 5: Modeling the Spatial Phase Separation Process in Hypermonotectic Alloys

    Wu, M., Ludwig, A. & Ratke, L., 2004, Solidification and Crystallization. p. 34-43

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  71. Published

    Consecutive process and microstructure modelling for aluminium sheet production

    Neumann, L., Kopp, R., Ludwig, A., Wu, M., Bührig-Polaczek, A., Schneider, M. & Gottstein, G., 2004, In: Modelling and simulation in materials science and engineering. 12, p. 19-31

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram

    Ludwig, A. & Leibbrandt, S., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 540-546

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Investigations on peritectic solidification of a binary organic system

    Mogeritsch, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Modeling Macroscopic phase separation phenomena during solidification with an Eulerian multiphase approach

    Wu, M. & Ludwig, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 239-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Modeling of Free Surface and Thermo-Solutal Convection by a Three-Phase Model

    Wang, T., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 181-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Non-Equilibrium Globular Microstructure suitable for Semi-Solid Casting of Light Metal Alloys by Rapid-Slug-Cooling-Technology (RSCT

    Ludwig, A., Bührig-Polaczek, A. & Sahm, P., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 651-655

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    On convection induced phase separation during solidification

    Ludwig, A. & Wu, M., 2004, Multiphase Phenomena in Materials Processing. p. 93-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    On the interaction between macrosegregation, shrinkage flow and grain movement

    Ludwig, A., Wu, M. & Eck, S., 2004, Solidification processes and microstructures: A Symposium in honour of Wilfried Kurz. p. 99-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. 2003
  81. Published

    Modeling of marangoni-induced droplet motion and melt convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 1 Jan 2003, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 34, 12, p. 3009-3019 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Adsorption and reaction of CO on a ceria-Rh(111) "inverse model catalyst" surface

    Eck, S., Castellarin-Cudia, C., Prince, K. C., Ramsey, M. G. & Netzer, F. P., 2003, In: Surface Science. 536, p. 166-176

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Cooperation within MEBSP on the Subject of Air Gap Formation during a Casting Process

    Kron, J., Bellet, M., Ludwig, A., Wendt, J., Pustal, B. & Fredrikson, H., 2003, In: Advanced engineering materials. 5, p. 78-79

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Grain evolution and macrosegregation in Al-4.0wt.%Cu casting: simulation and experimental evaluation

    Wu, M., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 261-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Growth of ordered bithiophene layers on the p(2x1) reconstructed Cu(110) surface

    Koller, G., Eck, S., Netzer, F. P. & Ramsey, M. G., 2003, In: Surface Science. 536, p. 155-165

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Influence of Convection and Grain Movement on Globular Equiaxed Solidification

    Wu, M., Ludwig, A., Bührig-Polaczek, A., Fehlbier, M. & Sahm, P. R., 2003, In: International journal of heat and mass transfer. 46, p. 2819-2832

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of Phase-Transport Phenomena on Macrosegregation and Structure Formation during Solidification

    Wu, M. & Ludwig, A., 2003, In: Advanced engineering materials. 5, p. 62-66

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Macro- and Microscopic Coupled Numerical Simulation of Microsegregation during Diffusion Controlled Solidification of Multi-Component Alloys

    Ludwig, A., Sahm, P. & Pustal, B., 2003, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. p. 411-419

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Microstructure Control by Solidification Processing – Outcome from a European Thematic Network

    Lacaze, J., Greer, L., Howe, A., Ludwig, A. & Fredrikson, H., 2003, In: Advanced engineering materials. 5, p. 11-16

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Modeling of Marangoni Convection during Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. p. 755-769

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Modeling of Marangoni induced droplet motion and convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 34, p. 3009-3019

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Modeling the decomposition and phase separation during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Modelling the solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. 11, p. 755-769

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Multiphase simulation of transport phenomena during solidification processes

    Ludwig, A. & Wu, M., 2003, Modellbildung und Simulation in der Werkstoff-Schweiß- und Umformtechnik. p. 11-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Split-Solid-Model to Simulation the Formation of Shrinkage Cavities and Macrosegregation in Steel Casting

    Ehlen, G., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Study of rheology of semisolid alloys within a capillary viscometer

    Ludwig, A., Wu, M. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 191-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Time Dependent Simulation of Pool Shape during Laser Spot Welding

    Ludwig, A., Sahm, P. & Ehlen, G., 2003, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 2947-2961

    Research output: Contribution to journal › Article › Research › peer-review

  98. 2002
  99. Published

    Growth and thermal properties of ultrathin cerium oxide layers on Rh(111)

    Eck, S., Castellarin-Cudia, C., Surnev, S., Ramsey, M. G. & Netzer, F. P., 2002, In: Surface Science. 520, p. 173-185

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Influence of Welding Power and Welding Duration on the Shape of the Weld Pool: Transient Effects

    Ludwig, A., Ehlen, G. & Sahm, P., 2002, Mathematical Modelling of Weld Phenomena V. p. 161-192

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. Published

    Modeling of Globular Equiaxed Solidification with a Two-Phase Approach

    Ludwig, A. & Wu, M., 2002, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 3673-3683

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Thermophysical Properties Necessary for Advanced Casting Simulations

    Ludwig, A., 2002, In: International journal of thermophysics. p. 1131-1135

    Research output: Contribution to journal › Article › Research › peer-review

  103. 2001
  104. Published

    Comparison of Dendrites of a Pure Material with Thermal Alloy Dendrites: an Experimental Method to Estimate the T0-Temperature

    Ludwig, A., 2001, In: Acta materialia. p. 165-169

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems

    Ludwig, A. & Pustal, B., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 337-340

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    How to Find Thermophysical Material Property Data for Casting Simulations?

    Ludwig, A., 2001, In: Advanced engineering materials. p. 11-15

    Research output: Contribution to journal › Article › Research › peer-review

  107. 2000
  108. Published

    Influence of Convection and Surface Effects on Macrosegregations in Eutectic and Peritectic Systems

    Ludwig, A., Ehlen, G. & Sahm, P., 2000, In: Materials Science Forum . p. 105-109

    Research output: Contribution to journal › Article › Research › peer-review

Previous 12 3 4 5 6 7 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 3101