Chair of Process Technology and Industrial Environmental Protection (500)
Organisational unit: Chair
Research output
- Published
Slags and Ashes as Secondary Resources for CO2 Capture and Utilization
Höllen, D., Niesenbacher, I., Treimer, R., Stöllner, M. & Lehner, M., 7 Sept 2015.Research output: Contribution to conference › Poster › Research
- Published
Slags and Ashes as Secondary Resources for CO2 Capture and Utilization
Höllen, D., Niesenbacher, I., Treimer, R., Stöllner, M., Melcher, F. & Lehner, M., 11 Sept 2015.Research output: Contribution to conference › Presentation › Research
- Published
“Sink or float” - Density separation of post- consumer plastics for feedstock recycling
Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L. J., Pomberger, R. & Hofer, W., 2017, Book of Abstracts: 9th international Symposium on Feedstock Recycling of Polymeric Materials, July 10th - 13th, 2017 at VSB-Technical University of Ostrava, Ostrava, Czech Republic. Ostrava, p. 19-21Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Sink–float density separation of post-consumer plastics for feedstock recycling
Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L., Pomberger, R. & Hofer, W., 24 May 2018, In: Journal of Material Cycles and Waste Management. 20.2018, July, p. 1781–1791 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Simulation of the COREX-melter gasifier - Progress report to step II
Weiß, C. & Berger, K., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Simulation des Trocknungsprozesses in einer Papiermaschine und Betrachtung der Auswirkungen durch Veränderung des Trockenpartieaufbaus und der Prozessparameter
Schneidl, G., 2020Research output: Thesis › Master's Thesis
- Published
Simulation and evaluation of different methanol synthesis routes
Laimer, D., 2022Research output: Thesis › Master's Thesis
- Published
Shear cell test setup for characterization of bulk material flowability in a granular simulation environment
Weiß, C. & Fuchs, J., 2012, European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) CD-ROM Proceedings. p. 1-11Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Separation of dust, halogen and PCCD/F in a compact wet scrubber
Lehner, M., Mayinger, F. & Geipel, W., 2001, In: Transactions of the Institution of Chemical Engineers / B, Process safety and environmental protection. 79, p. 109-116Research output: Contribution to journal › Article › Research › peer-review
- Published
Sensor-based Particle Size Determination of Shredded Mixed Commercial Waste based on two-dimensional Images
Kandlbauer, L., Khodier, K., Ninevski, D. & Sarc, R., 1 Feb 2021, In: Waste management. 120.2021, 1 February, p. 784-794 11 p.Research output: Contribution to journal › Article › Research › peer-review