Chair of Polymer Processing (350)

Organisational unit: Chair

1 - 20 out of 944Page size: 20

Research output

  1. 2025
  2. Published

    Der Slalom des Ski-Recyclings

    Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.

    Research output: Other contribution › Research

  3. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry

    Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2024
  7. Published

    CircularBioMat

    Schuschnigg, S. & Holzer, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. Griesser, T. & Ladstätter, E. (eds.). Leoben, Vol. 13. p. 223

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding

    Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Manufacturing of Soft Dielectric Actuator Assemblies by Material Extrusion (MEX)

    Raguz, I., Berer, M., Beier, P., Schlögl, S., Brancart, J., Vanderborght, B. & Holzer, C., 21 Nov 2024, p. 143-151. 9 p.

    Research output: Contribution to conference › Paper

  10. Published

    Analyse und Optimierung von österreichischem Polystyrol-Haushaltsabfall für die Wiederverwendung in Joghurtbecher-Lebensmittelverpackungen

    Krempl, N., Frühwirth, M., Zidar, D., Shahroodi, Z., Holzer, C., Pinter, E., Archodoulaki, M. V., Bichler, L., Jahn, E., Gabriel, V. H. & Aschermayer, F., 13 Nov 2024, VORTRÄGE-Konferenzband zur 17. Recy & DepoTech-Konferenz. p. 305-312 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Recycling of Wintersport Hardgoods - The Challenges of Circularity

    Zidar, D., Krempl, N., Pardametz, V., Bandl, C., Holzer, C., Griesser, T. (Editor) & Ladstätter, E. (Editor), Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. p. 39-47 9 p. (Publication Series Polymer Engineering & Science Leoben; vol. 13).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Enhancing Recycled Polymers: The Impact of Reused Glass Fiber Composites on Rheological Properties and Processing Performance

    Shahroodi, Z., Krempl, N., Duretek, I. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  13. Published

    Insights Into LAOS Analysis of Liquid Silicone Rubber for Viscosity Determination

    Azevedo, M., Kerschbaumer, R. C. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  14. Published

    Rheological Characterisation of Powder Injection Moulding Feedstocks

    Duretek, I., Lucyshyn, T. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  15. Published

    Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

    Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen

    Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research

  18. Published

    Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

    Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates

    Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B. & Lucyshyn, T., 17 Jul 2024, In: Polymers. 16.2024, 14, 20 p., 2033.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Additive Manufacturing of Bone Implants

    Holzer, C., 1 Jul 2024.

    Research output: Contribution to conference › Abstract

Previous 1 2 3 4 5 6 7 8 ...48 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501