Chair of Physical Metallurgy (420)

Organisational unit: Chair

161 - 180 out of 2,174Page size: 20

Research output

  1. 2022
  2. Published

    Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

    LI, J., Zhou, X., Breen, A., Peng, Z., Su, J., Kürnsteiner, P., Correa, M. J. D., Chwałek, M. L., Wang, H., Holec, D., Mayer, J. & Dehm, G., 20 Dec 2022, In: Journal of alloys and compounds. 928.2022, 20 December, p. 1-12 12 p., 167177.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Long-Range Magnetic Order in Nickel Hydroxide-Functionalized Graphene Quantum Dots

    Michal, L., Roy, R., Holec, D., Perez, J. G., Pizurová, N., Necas, D., Doleckova, A., Medalova, J., Lepcio, P. & Zajickkova, L., 7 Dec 2022, In: Journal of physical chemistry letters. 13.2022, 49, p. 11536-11542 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Laser powder bed fusion of intermetallic titanium aluminide alloys using a novel process chamber heating system: A study on feasibility and microstructural optimization for creep performance

    Wartbichler, R., Maiwald-Immer, T., Pürstl, F. & Clemens, H., 5 Dec 2022, In: Metals : open access journal . 12.2022, 12, 23 p., 2087.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

    Musi, M., Clemens, H., Stark, A. & Spörk-Erdely, P., 26 Nov 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 6, 6 p., 2201242.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges Recycling

    Dworak, S., Fellner, J., Beermann, M., Häuselmann, M., Schenk, J., Michelic, S. K., Cejka, J., Sakic, A., Mayer, J. & Steininger, K., 25 Nov 2022, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 75.2023, Februar, p. 97-107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive Applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 18 Nov 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 11, p. 513-516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  10. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering

    Musi, M., Deshayes, C., Molénat, G., Toualbi, L., Galy, B., Spörk-Erdely, P., Hantcherli, M., Monchoux, J.-P., Thomas, M., Clemens, H. & Couret, A., 8 Nov 2022, In: Metals : open access journal . 12.2022, 11, 22 p., 1915.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Accurate ab initio modeling of solid solution strengthening in high entropy alloys

    Moitzi, F., Romaner, L., Ruban, A. V. & Peil, O., 24 Oct 2022, In: Physical review materials . 6.2022, 10, 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    The effect of zirconium on the Ti-(42-46 at.%)Al system

    Musi, M., Kardos, S., Hatzenbichler, L., Holec, D., Stark, A., Allen, M., Güther, V., Clemens, H. & Spörk-Erdely, P., 2 Oct 2022, (E-pub ahead of print) In: Acta materialia. 241.2022, December, 13 p., 118414.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels

    Sakic, A., Hofer, C., Schnitzer, R. & Holec, D., 18 Sept 2022, In: Advanced engineering materials. 24.2022, 11, 10 p., 2200532.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

    Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Plasticity and brittleness of the ordered βo phase in a TNM-TiAl alloy

    Molénat, G., Galy, B., Musi, M., Toualbi, L., Thomas, M., Clemens, H., Monchoux, J.-P. & Couret, A., 6 Sept 2022, (E-pub ahead of print) In: Intermetallics. 151.2022, December, 11 p., 107653.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    On the energetics of the cubic-to-hexagonal transformations in TiAl+Mo alloys

    Abdoshahi, N., Dehghani, M., Ruban, A. V., Friák, M., Šob, M., Spitaler, J. & Holec, D., 24 Aug 2022, (E-pub ahead of print) In: Acta materialia. 240.2022, November, p. 118268 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Experimental Investigation of Phase Equilibria in the Ti—Al—Zr System at 1000–1300 °C

    Kahrobaee, Z., Rashkova, B., Hauschildt, K. & Palm, M., 23 Aug 2022, In: Crystals. 12.2022, 9, 17 p., 1184.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4V

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I., Clemens, H. & Spörk-Erdely, P., 8 Aug 2022, (E-pub ahead of print) In: Materials characterization. 192.2022, October, 12 p., 112207.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...5 6 7 8 9 10 11 12 ...109 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben