Chair of Physical Metallurgy (420)

Organisational unit: Chair

1801 - 1850 out of 2,174Page size: 50

Research output

  1. 2006
  2. Published

    Charakterisierung von Werkzeugstählen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Combining SANS experiments with polarized and unpolarized neutrons to study precipitates in steels

    Bischof, M., Eidenberger, E. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Comparisation of Al1-xCrx-N Hard Coatings sysnthesized by Reactive Arc Evaporation & Magnetron Sputtering

    Tritremmel, C., Neidhardt, J., Sartory, B. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Copper Nanowires within the Central Channel of Tobacco Mosaic Virus Particles

    Balci, S., Bittner, A. M., Hahn, K., Scheu, C., Knez, M., Kadri, A., Wege, C., Jeske, H. & Kern, K., 2006, In: Electrochimica acta. 51, p. 6251-6257

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)

    Major, L., Morgiel, J., Major, B., Lackner, J. M., Waldhauser, W., Ebner, R., Nistor, L. & Van Tendeloo, G., 2006, In: Surface & coatings technology. 200, p. 6190-6195

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Deliverable D18: Thermal loadability, EU Projekt

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Design and Investigation of sputtered nanocomposite CrCx/a-C:H low-friction coatings

    Gassner, G., 2006, 127 p.

    Research output: Thesis › Doctoral Thesis

  10. Published

    Durchstoffversuche an Hartstoffschichten

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Einfluss des Aluminiumgehaltes auf die Gefügeentwicklung eines niedriglegierten TRIP-Stahls

    Spenger, F., Traint, S., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 215-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Einflussparameter auf die Zähigkeit von Maragingstählen

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen Brammen

    Winkelhofer, F., Parteder, E., Leitner, H., Clemens, H., Spiradek-Hahn, K. & Kozeschnik, E., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 281-288

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 4

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 5

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 6

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 7

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 8

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 9

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Entwicklung eines Legierungskonzeptes für einen korrosionsträgen Lagerwerkstoff für die Anwendung in Flugzeugtriebwerken

    Peißl, S. K., 2006

    Research output: Thesis › Doctoral Thesis

  24. Published

    Entwicklung von Hartstoffschichten auf Chrom-Basis mit Hilfe der Pulsed Laser Deposition

    Bachler, G., 2006, 88 p.

    Research output: Thesis › Diploma Thesis

  25. Published

    Entwicklung von hoch stickstoffhaltigen austenitischen Cr-Mn-Mo-Ni-Stählen höchster Korrosionsbeständigkeit und Festigkeit

    Saller, G., 2006, 124 p.

    Research output: Thesis › Doctoral Thesis

  26. Published

    Epitaxy and Bonding of Cu Films on Oxygen-Terminated a-Al2O3 (0001) Surfaces

    Oh, S. H., Scheu, C., Wagner, T., Tchernychova, E. & Rühle, M., 2006, In: Acta materialia. 54, p. 2685-2696

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Ermüdungsverhalten von Bohrkronen in der Bergtechnik

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Festigkeitsuntersuchungen an Bronzeschweissungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    FFF-Projekt LowFrictionCoatings

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Fibrillar level fracture in bone beyond the yield point

    Gupta, H. S., Wagermaier, W., Zickler, G., Hartmann, J., Funari, S. S., Roschger, P., Wagner, H. D. & Fratzl, P., 2006, In: International Journal of Fracture. 139, p. 425-436

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fraktographische Beurteilung von geschädigten Bauteilen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Fraktographische Beurteilung von geschädigten Bauteilen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Fraktographische Beurteilung von geschädigten Bauteilen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Fraktographische Beurteilung von geschädigten Bauteilen - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Fraktographische Beurteilung von Schweissbiegproben

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Fraktographische Untersuchungen an Bauteilen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Fullerene-like carbon nitride - a new thin film material

    Neidhardt, J., Broitman, E. & Hultman, L., 2006, Wide Band Gap Materials and New Developments. p. 1-39

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Gefügebewertung an einem martensitischen Werkstoff durch Transmissionselektronenmikroskopie (TEM) und Neutronenkleinwinkelstreuung (SANS)

    Sonnleitner, M., Klein, M., Spiradek-Hahn, K., Staron, P., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Gefügecharakterisierung der Randschicht und Einfluss der Anlasstemperatur auf das Korrosions - und Verschleißverhalten des Pyrowear 675 und des CSS42L im Vergleich zum M50NiL

    Paulitsch, J., 2006

    Research output: Thesis › Diploma Thesis

  40. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Gefügecharakterisierung von hochfesten Blechen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Gefügefeinung einer neuen, hoch niobhaltigen TiAl-Legierung durch Massivtransformation und Wärmebehandlung - Endbericht

    Scheu, C., Schnitzer, R., Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    High Temperature Arc Evaporation of Al1-xTixN coatings on Powder Metallurgical High-Speed Steels

    Pfeiler, M., Mitterer, C., Mayrhofer, P. H., Caliskanoglu, D., Kölker, W. & Pitonak, R., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 411-418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    High-temperature low-friction properties of vanadium-alloyed AlCrN coatings

    Franz, R., Neidhardt, J., Sartory, B., Kaindl, R., Tessadri, R., Polcik, P., Derflinger, V. & Mitterer, C., 2006, In: Tribology Letters. 23, p. 101-107

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    High-temperature oxidation resistance of Ta-Si-N films with a high Si content

    Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    High-Temperature Tribological Behavior of Cr'N-Ag Self-lubricating Coatings

    Kutschej, K., Mitterer, C., Mulligan, C. P. & Gall, D., 2006, In: Advanced engineering materials. 8, p. 1125-1129

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    High-temperature tribological behaviour of TiN and VN coatings

    Fateh, N., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    High-temperature tribological behaviour of TiN and VN coatings

    Fateh, N., Fontalvo, G. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Hochtemperaturbeständige nanostrukturierte und intermetallische Schichten für Bauteile aus Gamma-TiAl

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    identification of the different reactions taking place during a thermal treatment in order to obtain nanostructured coatings (superlattice, nanocomposite, intermetallic, TBC) ....

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Influence of bainitic/martensitic microstructures on the mechanical properties of hot-work tool steels

    Mayer, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...33 34 35 36 37 38 39 40 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben