Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

Research output

  1. 2016
  2. Published
  3. Published

    Melting behaviour of ferronickel slags

    Sagadin, C., Luidold, S., Wagner, C. & Wenzl, C., 2016, In: JOM. 68, 12, p. 3022-3028

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P., 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  5. Published

    Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie

    Pogatscher, S., Gerstl, S., Löffler, J. F. & Uggowitzer, P., 2016, 9. Ranshofener Leichtmetalltage.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Published
  7. Published

    Mini mill solutions in the Recycling of electic Arc Furnace Dust - The 2SDR process

    Rösler, G., Pichler, C., Steinlechner, S. & Antrekowitsch, J., 2016, TMS Annual Meeting: Chapter 7. 1 ed. p. 43-48 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Published

    Mini Mill Solutions in the Recycling of Electric Arc Furnace Dust – The 2sDR Process

    Rösler, G., Pichler, C., Steinlechner, S. & Antrekowitsch, J., 2016, REWAS 2016. Wiley-VCH , p. 43-48

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Published
  10. Published

    Optimierung der Eigenschaften von plattierten 7xxx-Werkstoffen

    Kremmer, T., 2016

    Research output: ThesisDoctoral Thesis

  11. Published
  12. Published
  13. Published

    Phase transitions in quenched nonferrous metallic systems

    Pogatscher, S., 2016

    Research output: ThesisHabilitation thesispeer-review

  14. Published

    Recycling einer Mo-50W-Legierung durch Trennung der Oxide

    Stögner, P., 2016

    Research output: ThesisMaster's Thesis

  15. Published
  16. Published
  17. Published

    Recycling und Rückgewinnung der Wertmetalle aus CIGS-Modulen

    Maurer, N., 2016

    Research output: ThesisMaster's Thesis

  18. Published

    Thermodynamic and experimental investigation of high temperature refractory corrosion by molten slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 2016.

    Research output: Contribution to conferencePaper

  19. Published
  20. Published

    Trace element-added Al-Mg-Si alloys

    Pogatscher, S., Werinos, M., Antrekowitsch, H. & Uggowitzer, P., 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  21. Published

    Ultrafast artificial aging of Al-Mg-Si alloys

    Werinos, M., Antrekowitsch, H., Kozeschnik, E., Ebner, T., Löffler, J. F., Uggowitzer, P. & Pogatscher, S., 2016, In: Scripta materialia. 112, p. 148-151

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published
  23. Published

    Verhalten diverser Elemente bei der Kupferraffinationselektrolyse

    Sorger, C., 2016

    Research output: Book/ReportCommissioned reportResearch

  24. Published

    Wärmekapazität von Salzschlacken

    Luidold, S., 2016

    Research output: Book/ReportCommissioned reportResearch

  25. 2015
  26. Published

    Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system

    Povoden-Karadeniz, E., Lang, P., Moszner, F., Pogatscher, S., Ruban, A. V., Uggowitzer, P. & Kozeschnik, E., 1 Dec 2015, In: Calphad. 51, p. 314-333 20 p.

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published
  28. Published
  29. Published

    Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis

    Angerer, T., 5 Nov 2015.

    Research output: Contribution to conferencePresentationResearch

  30. Published

    Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis

    Angerer, T. & Hofer, S., 4 Nov 2015.

    Research output: Contribution to conferencePosterResearch

  31. Published

    Kinetics and Optimization of Refractory Metal Alloy Oxidation and Sublimation

    Ratschbacher, K. & Luidold, S., 1 Nov 2015, In: Chemie-Ingenieur-Technik. 87, 11, p. 1558-1568 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Nov 2015, In: Metall. 69, 11, p. 431-435

    Research output: Contribution to journalArticleResearch

  33. Published
  34. Published

    Thermodynamic Considerations for Primary Copper Flue Dust

    Steinacker, S. & Antrekowitsch, J., Nov 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68, 6/2015, p. 328-335

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published
  36. Published

    CDL Evaluierung 2015

    Pichler, C., 29 Oct 2015.

    Research output: Contribution to conferencePresentationTransferpeer-review

  37. Published

    Der 2sDR Prozess als alternatives Aufarbeitungsverfahren für Stäube der Stahlindustrie

    Wegscheider, S., 29 Oct 2015.

    Research output: Contribution to conferencePresentationResearch

  38. Published
  39. Published

    Problematik der Halogene in sekundären Zinkoxiden

    Benigni, C., 29 Oct 2015.

    Research output: Contribution to conferencePresentationResearch

  40. Published

    Recycling Techniques for Zinc-Containing Residues from the Secondary Copper Industry

    Steinacker, S., 27 Oct 2015.

    Research output: Contribution to conferencePresentationResearch

  41. Published
  42. Published

    State of the Art in Steel Mill Dust Recycling

    Antrekowitsch, J., Rösler, G. & Steinacker, S., 8 Oct 2015, In: Chemie-Ingenieur-Technik. 87, 11, p. 1498-1503

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Ab initio study on stacking faults in gamma-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2 Oct 2015.

    Research output: Contribution to conferencePosterResearch

  44. Published

    Atom probe tomography investigations of modified early stage clustering in Si-containing aluminum alloys

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P., 1 Oct 2015, In: Acta Physica Polonica A. 128, 4, p. 643-646 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Problematik der Halogene im Wälzoxid

    Benigni, C., 29 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  46. Published

    Recycling industrieller Reststoffe

    Wegscheider, S., 29 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  47. Published

    Verbesserung der Produktqualität (Zinkoxide, edelmetallhaltige Materialien)

    Steinlechner, S., 29 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  48. Published

    Agglomeration und Recycling von metallhaltigen Stäuben und Schlämmen

    Zöhrer, M., 24 Sept 2015.

    Research output: Contribution to conferencePresentationTransfer

  49. Published

    Influence of the raw material on the melt quality of aluminium alloys

    Doppler, T., 23 Sept 2015.

    Research output: Contribution to conferencePosterResearch

  50. Published

    The role of minor metals in the recycling of industrial residues

    Steinlechner, S., 23 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  51. Published

    Agglomeration und Recycling aluminiumhaltiger Reststoffe

    Zöhrer, M., 17 Sept 2015.

    Research output: Contribution to conferencePresentationTransfer

  52. Published

    Projektvorstellung - Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T., 17 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  53. Published

    Prozessentwicklung zur metallurgischen Verwertung von Elektroaltgeräten

    Sorger, C., 17 Sept 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  54. Published

    Verbesserung der Produktqualität sekundärer Zinkoxide

    Benigni, C., 17 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  55. Published

    The 2sDR process - Innovative treatment of Electric Arc Furnace Dust

    Wegscheider, S., 15 Sept 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  56. Published

    Strategies for the treatment of metallurgical recycling slags

    Pichler, C. & Antrekowitsch, J., 14 Sept 2015.

    Research output: Contribution to conferencePaperpeer-review

  57. Published

    Strategies for the treatment of metallurgical recycling slags

    Pichler, C. & Antrekowitsch, J., 14 Sept 2015, Wastes: Solutions, Treatments and Opportunities. p. 221-227

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Published

    The 2sDR process - Innovative treatment of Electric Arc Furnace Dust

    Wegscheider, S., Steinlechner, S., Pichler, C., Rösler, G. & Antrekowitsch, J., 14 Sept 2015.

    Research output: Contribution to conferencePaperpeer-review

  59. Published

    The 2sDR process - Innovative treatment of Electric Arc Furnace Dust

    Wegscheider, S., Steinlechner, S., Pichler, C., Rösler, G. & Antrekowitsch, J., 14 Sept 2015, Wastes: Solutions, Treatments and Opportunities.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Published

    Recycling of Zinc and Lead Bearing Residues with Pyrolysis Gas

    Pichler, C. & Antrekowitsch, J., 9 Sept 2015, In: JOM. 67, 9, p. 2038 2046 p.

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published

    Recycling technologies for rare earths

    Luidold, S., 9 Sept 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  62. Published
  63. Published

    Lead Slag – A possible secondary resource to recover valuable metals out of a waste

    Rösler, G., 8 Sept 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  64. Published

    Motivation und Aufgabenstellung im Bereich der Technologiemetalle

    Luidold, S., 3 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  65. Published

    Thermodynamic Considerations for Primary Copper Flue Dust

    Steinacker, S. & Antrekowitsch, J., 3 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  66. Published

    Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys

    Hofstetter, J., Martinelli, E., Pogatscher, S., Schmutz, P., Povoden-Karadeniz, E., Weinberg, A. M., Uggowitzer, P. & Löffler, J. F., 1 Sept 2015, In: Acta biomaterialia. 23.2015, 1 September, p. 347-353 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  67. Published

    Recycling of Nd2Fe14B magnets

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 1 Sept 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68, 5, p. 278-285 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  68. Published

    Zwischenbericht (Jahr 1) - Research Studio Austria - RessouRec

    Steinlechner, S., Pichler, C. & Antrekowitsch, J., Sept 2015

    Research output: Book/ReportCommissioned reportResearch

  69. Published

    Thermodynamic Aspects of Flue Dust Formation in the Primary Copper Industry

    Steinacker, S., Antrekowitsch, J. & Schnideritsch, H., 25 Aug 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  70. Published

    Thermodynamic Aspects of Flue Dust Formation in the Primary Copper Industry

    Steinacker, S., Antrekowitsch, J. & Schnideritsch, H., 23 Aug 2015, Proceedings of the 54th Annual Conference of Metallurgists hosting America's Conference on Aluminum Alloys. Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  71. E-pub ahead of print

    Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys

    Hofstetter, J., Rüedi, S., Baumgartner, I., Kilian, H., Mingler, B., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 13 Aug 2015, (E-pub ahead of print) In: Acta materialia. 98.2015, 1 October, p. 423-432 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  72. Published
  73. Published
  74. Published

    Dynamic properties of major shear bands in Zr-Cu-Al bulk metallic glasses

    Thurnheer, P., Maaß, R., Laws, K. J., Pogatscher, S. & Löffler, J. F., 29 Jul 2015, In: Acta materialia. 96, p. 428-436 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  75. Published

    Anodizing of secondary aluminium

    Schlögl, C., 30 Jun 2015, p. 1-1. 1 p.

    Research output: Contribution to conferencePosterResearch

  76. Published

    Recycling Potential of Precious Metals From Zinc, Lead and Copper Containing Residues.

    Steinlechner, S., 17 Jun 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  77. Published

    Development of a lead-free brass alloy

    Angerer, T., 16 Jun 2015.

    Research output: Contribution to conferencePresentationResearch

  78. Published

    Anodizing of secondary aluminium

    Schlögl, C. & Antrekowitsch, H., 15 Jun 2015.

    Research output: Contribution to conferencePresentationResearch

  79. Published

    Development of a lead-free brass alloy

    Angerer, T. & Hofer, S., 15 Jun 2015.

    Research output: Contribution to conferencePosterResearch

  80. Published

    Effects of pyrolysis on the metallurgical processing of waste electrical and electronic equipment

    Sorger, C., Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 15 Jun 2015, p. 819-831.

    Research output: Contribution to conferencePaperpeer-review

  81. Published

    Effects of Pyrolysis on the Metallurgical Processing of Waste Electrical and Electronic Equipment

    Sorger, C., 15 Jun 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  82. Published

    Effects of Pyrolysis on the Metallurgical Processing of Waste Electrical and Electronic Equipment

    Sorger, C., 15 Jun 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  83. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T. & Antrekowitsch, H., 15 Jun 2015.

    Research output: Contribution to conferencePresentationResearch

  84. Published

    Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 15 Jun 2015.

    Research output: Contribution to conferencePresentationResearch

  85. Published

    Recycling Potential of Precious Metals From Zinc, Lead and Copper Containing Residues.

    Steinlechner, S., 15 Jun 2015, Proceedings of Lead-Zinc Conference Pb-Zn 2015. GDMB, Vol. 1. p. 121-137 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  86. Published

    Sustainable Recovery of Heavy Metals from Metallurgical Dust – the 2sDR process

    Rösler, G., Pichler, C., Wegscheider, S. & Antrekowitsch, J., 15 Jun 2015, Proceedings PbZn 2015: Volume 2. GDMB, p. 877-886

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  87. Published

    Development of a lead-free brass alloy

    Angerer, T., Hofer, S. & Antrekowitsch, H., 14 Jun 2015, EMC 2015: Production of non-ferrous metals-indispensable foundation for the industry and our prosperity. Clausthal-Zellerfeld, Vol. 1. p. 226-230 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  88. Published

    Recycling of aluminium powdered waste

    Zöhrer, M. & Angerer, T., 14 Jun 2015, p. 1132. 1133 p.

    Research output: Contribution to conferencePosterTransfer

  89. Published

    Recycling of Residues from the Copper Industry

    Steinacker, S., 14 Jun 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  90. Published

    Recycling of Residues from the Copper Industry

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 14 Jun 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  91. Published

    Recycling of Residues from the Copper Industry

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 14 Jun 2015, Proceedings of European Metallurgical Conference EMC 2015. Deutschland: GDMB

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Published

    Wet chemical decoating of metal cutting tools

    Ebner, T. & Kücher, G., 14 Jun 2015. 1 p.

    Research output: Contribution to conferencePosterResearch

  93. Published
  94. Published

    Werkstoffentwicklung bleifreier Messinglegierungen (Teil 2/3)

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Jun 2015, In: Metall. 69, 6, p. 240-244 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  95. Published

    Alternative Models for Calculation of CAPEX and OPEX for Hydrometallurgical Plant

    Osthof, H., Steinlechner, S. & Antrekowitsch, J., Jun 2015, Copper Cobalt Africa 2015: The 8th Southern African Base Metals Conference. p. 439-444 6 p. (Symposium Series S83).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  96. Published

    Innovative utilization of steel mill dust for the creation of secondary raw materials - 2sDR process

    Wegscheider, S., Jun 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  97. Published

    Innovative utilization of steel mill dust for the creation of secondary raw materials - 2sDR process

    Wegscheider, S., Jun 2015.

    Research output: Contribution to conferenceAbstractpeer-review

  98. Published

    Innovative utilization of steel mill dust for the creation of secondary raw materials - 2sDR process

    Wegscheider, S., Jun 2015, Proceedings of Lead-Zinc Conference Pb-Zn 2015. Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  99. Published

    Entwicklung einer bleifreien Messinglegierung

    Angerer, T. & Hofer, S., 19 May 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  100. Published

    Rasche Warmauslagerung von Al-Mg-Si Legierungen

    Werinos, M. & Antrekowitsch, H., 19 May 2015.

    Research output: Contribution to conferencePosterResearch

  101. Published

    Recycling von Reststoffen aus der Kupfer-Metallurgie

    Steinacker, S., 19 May 2015.

    Research output: Contribution to conferencePosterResearch

  102. Published

    Rapid artificial aging of Al-Mg-Si alloys

    Werinos, M. & Antrekowitsch, H., 15 May 2015.

    Research output: Contribution to conferencePosterResearch

Previous 1...5 6 7 8 9 10 11 12 ...24 Next