Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

2301 - 2350 out of 2,399Page size: 50

Research output

  1. 2005
  2. Published

    Einsatz von Gasen während der Raffination von ausgewählten Nichteisenmetallen

    Potesser, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Electrochemical and Metallographic Characterization of Inhibitor Variation in Copper Refining Electrolysis

    Mubarok, Z., 2005, European Metallurgical Conference (EMC) 2005. GDMB

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Electrochemical and microscopic analysis of cathode nodulation behaviour in copper electrolytic refining

    Mubarok, Z., 2005

    Research output: Thesis › Doctoral Thesis

  5. Published

    Elektrolichtbogenofen - Konzept zur Schlacken- und Staubaufarbeitung

    Antrekowitsch, J., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Element distrbution and process optimization at the secondary metallurgy of copper

    Messner, T., Pesl, J. & Antrekowitsch, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Element Distribution and Process Optimization at the Secondary Metallurgy of Copper

    Messner, T., Antrekowitsch, H. & Pesl, J., 2005, Proceedings Volumes EMC 2005. GDMB, p. 49-62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Erforschung der NOx-Abgasemmisionen bei einem Luft-Sauerstoff-Erdgas-Mischbrenner

    Potesser, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Ermittlung der Festigkeitseigenschaften schweißgelöteter Platinen aus Stahl und Aluminium

    Krammerbauer, J. & Potesser, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Ersatz für Sn (Whiskey-Flaschenverschluss)

    Wenzl, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Evaluierung des Stands der Technik in der Ferrolegierungsproduktion

    Pucher, P. & Hochenhofer, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Evaluierung des Verhaltens von Feuerfest - Zustellungen in Aggregaten der NE – Industrie unter Berücksichtigung verschiedenster Randbedingungen

    Prietl, T., Triessnig, A. & Studnicka, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Flash-Reacting

    Matl, B., Antrekowitsch, J. & Offenthaler, D., 2005, microCAD 2005. p. 19-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Flash-Reacting - A new concept for smelting

    Antrekowitsch, J. & Offenthaler, D., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Hydrometallurgische Platinrückgewinnung aus Erdölkatalysatoren

    Offenthaler, D. & Antrekowitsch, J., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Inducarb - Reduktion von Schlacken in einem induktiv beheizten Koksbett

    Antrekowitsch, J., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Jahresbericht 2005 CD-Labor

    Antrekowitsch, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Liquid Slag Reduction

    Wenzl, C., Graller-Kettler, G. & Pesl, J., 2005, European Metallurgical Conference 2005 (EMC 2005), Tagungsbände. GDMB, p. 75-89

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Literaturrecherche Rückgewinnung von Mn

    Wenzl, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Literaturrecherche Verwertung von Leiterplatten

    Wenzl, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Main parameters on the performance of a desulfurisation of Ferro-Nickel by slag reaction

    Hochenhofer, M., Antrekowitsch, H. & Juhart, M., 2005, EPD CONGRESS 2005. p. 629-639

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Massenbilanzierung bei der Aufarbeitung von Mg-Reststoffen

    Antrekowitsch, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Massenbilanzierung bei Mg-Krätzen

    Antrekowitsch, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Mehrphasenströmungssimulation des Tribojet-Zerstäubers

    Redl, C., Matl, B. & Antrekowitsch, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Mengenbilanzen bei der Aufarbeitung von Elektronikschrott

    Antrekowitsch, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Modellierung von Stoff- und Energieströmen unter besonderer Berücksichtigung des Flammofenraffinationsprozesses sowie der Kreislaufströme einer Sekundärkupferhütte

    Candic, M., Messner, T., Pesl, J. & Antrekowitsch, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Möglichkeiten zur Beeinflussung des Oxidationszustandes vanadiumoxidhältiger Schlacken - Literaturrecherche

    Krassnig, H.-J. & Ressel, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Nichteisenmetallurgie - Exkursion der Montanuniversität Leoben nach Spanien und Portugal

    Potesser, M., 2005, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 58, p. 226-230

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Nichteisenmetallurgie - Kurzvorstellung ausgewählter Projekte der Automobilindustrie

    Potesser, M., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Optimierung der Masselvorbehandlung bei der Sekundärmetallurgie von Magnesium

    Seebacher, H., Antrekowitsch, H., Rammer, C., Sigmund, A. & Wohlmuth, P., 2005, In: Druckguss-Praxis. p. 13-18

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Optimization of the Shaft Furnace in the Secondary Copper Industry

    Rivera, S., Messner, T., Pesl, J. & Antrekowitsch, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Oxidationsverhalten von Al-Mg-Legierungen

    Antrekowitsch, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Processes for Niobium Powder - a Literature Evaluation, Part II: Post Reduction Treatments

    Luidold, S. & Paschen, P., 2005, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. p. 198-202

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Processes for Niobium Powder - a Literature Evaluation, Part I: Reduction of Niobium Compounds

    Luidold, S. & Paschen, P., 2005, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. p. 89-94

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Processing of residues by a new developed Flash-Reactor

    Matl, B., Antrekowitsch, H. & Offenthaler, D., 2005, Proc. of microCAD 2005. p. 19-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Processing of vanadiferous residues to Ferrovanadium

    Ressel, R., Hochenhofer, M. & Antrekowitsch, H., 2005, EPD Congress 2005. p. 763-778

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Process optimisation and quality improvement by gas-purging in the Al-industry

    Antrekowitsch, H., Complojer, M., Gamweger, K. & Kraly, A., 2005, Proc. of the 2nd International Light Metals Technology Conference (2005). Leichtmetallkompetenzzentrum, p. 97-101

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Product development and metallurgy - Combinig two views on the calculation of recovery rates in weee recycling

    Hermann, C., Antrekowitsch, H., Luger, T., Seebacher, H. & Stachura, M., 2005, Proc.of 7th World Congress on Recovery, Recycling and Re-Integration CD-ROM. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Product development and metallurgy - Combining two views on the calculation of recovery rates in weee recycling

    Hermann, C., Antrekowitsch, H., Luger, T., Seebacher, H. & Stachura, M., 2005, Proc. of 7th World Congress on Recovery, Recycling and Re-Integration. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor

    Luidold, S., 2005

    Research output: Thesis › Doctoral Thesis

  41. Published

    Productivity Increase in a Peirce-Smith Converter using the COP KIN and OPC System

    Prietl, T., Filzwieser, A. & Wallner, S., 2005, 134th TMS Annual Meeting, San Francisco. p. 177-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Produktion von Germanium - Rohstoffe und Verfahrenstechnologien bei der Herstellung von Germanium

    Wenzl, C. & Hoy, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Projekt: Charakterisierung des IMR-Schlitzdüsenprinzips mittels Wasserversuchen - Sympatec-Laserbeugungsmessung

    Matl, B. & Luidold, S., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Pyrometallurgical refining of copper in an anode furnace

    Antrekowitsch, H., Wenzl, C., Filzwieser, I. & Pesl, J., 2005,

    Proc. of 134th TMS Annual Meeting & Exhibition

    .     p. 191-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Reactive Atomization of black copper by using the PATCO-Sprayconverter

    Matl, B., Antrekowitsch, H. & Pestalozzi, A., 2005, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 58, p. 83-88

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    RecoDust - A new step in steelmill-dust recycling

    Antrekowitsch, J. & Offenthaler, D., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Reco-Dust - A new way in steel mill dust treatment

    Antrekowitsch, J., 2005, 5th asian steel conference. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Recycling von Magnesium und Aluminium in der Automobilindustrie

    Seebacher, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Reduction of melted steel mill dust in an iron bath - a "zero waste" solution

    Antrekowitsch, J., 2005, Proc. of international lead and zinc processing 1. p. 779-789

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Salzschlackenaufarbeitung bei Mg

    Antrekowitsch, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Schlackenreduktion in der Kupfersekundärmetallurgie

    Wenzl, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...43 44 45 46 47 48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204