Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

801 - 850 out of 2,400Page size: 50

Research output

  1. 2016
  2. Published

    Mechanisms controlling natural aging and its effect on artificial aging in Al-Mg-Si alloys with and without trace element additions

    Werinos, M., 2016

    Research output: Thesis › Doctoral Thesis

  3. Published

    Melting behaviour of ferronickel slags

    Sagadin, C., Luidold, S., Wagner, C. & Wenzl, C., 2016, In: JOM. 68, 12, p. 3022-3028

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie

    Pogatscher, S., Gerstl, S., Löffler, J. F. & Uggowitzer, P., 2016, 9. Ranshofener Leichtmetalltage.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Mini mill solutions in the recycling of electic arc furnace dust - the 2<sup>S</sup>DR process

    Rösler, G., Pichler, C., Steinlechner, S. & Antrekowitsch, J., 2016

    Research output: Book/Report › Book › Research

  7. Published

    Mini mill solutions in the Recycling of electic Arc Furnace Dust - The 2SDR process

    Rösler, G., Pichler, C., Steinlechner, S. & Antrekowitsch, J., 2016, TMS Annual Meeting: Chapter 7. 1 ed. p. 43-48 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Mini Mill Solutions in the Recycling of Electric Arc Furnace Dust – The 2sDR Process

    Rösler, G., Pichler, C., Steinlechner, S. & Antrekowitsch, J., 2016, REWAS 2016. Wiley-VCH , p. 43-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    New preparation and recycling procedure to recover rare earth elements from magnets by using a closed loop treatment

    Stuhlpfarrer, P., Luidold, S., Schnideritsch, H. & Antrekowitsch, H., 2016, In: Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 125, 4, p. 204-210

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Optimierung der Eigenschaften von plattierten 7xxx-Werkstoffen

    Kremmer, T., 2016

    Research output: Thesis › Doctoral Thesis

  11. Published

    Optimierung von Al-Mg-Mn-Legierungen für den Einsatz im Automobil: Teil 1: Hochtemperaturverformung

    Ebenberger, P., 2016, 28 p.

    Research output: Other contribution › Research

  12. Published

    Optimierung von Al-Mg-Mn-Legierungen für den Einsatz im Automobil: Teil 2: Raumtemperaturverformung

    Ebenberger, P., 2016, 26 p.

    Research output: Other contribution › Research

  13. Published

    Phase transitions in quenched nonferrous metallic systems

    Pogatscher, S., 2016

    Research output: Thesis › Habilitation thesis › peer-review

  14. Published

    Recycling einer Mo-50W-Legierung durch Trennung der Oxide

    Stögner, P., 2016

    Research output: Thesis › Master's Thesis

  15. Published

    Recycling einer Mo-Nb-Legierung mittels Oxidation und Sublimation

    Hofer, D., 2016

    Research output: Thesis › Master's Thesis

  16. Published

    Recycling of waste printed circuit boards with simultaneous enrichment of special metals by using alkaline melts: A green and strategically advantageous solution

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2016, In: Journal of Hazardous Materials. 307, p. 17-25

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Recycling und Rückgewinnung der Wertmetalle aus CIGS-Modulen

    Maurer, N., 2016

    Research output: Thesis › Master's Thesis

  18. Published

    Thermodynamic and experimental investigation of high temperature refractory corrosion by molten slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 2016.

    Research output: Contribution to conference › Paper

  19. Published

    Thermodynamic Investigations for the Separation and Processing of different Metals from waste electrical and electronic equipment

    Sorger, C. & Luidold, S., 2016.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Trace element-added Al-Mg-Si alloys

    Pogatscher, S., Werinos, M., Antrekowitsch, H. & Uggowitzer, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Ultrafast artificial aging of Al-Mg-Si alloys

    Werinos, M., Antrekowitsch, H., Kozeschnik, E., Ebner, T., Löffler, J. F., Uggowitzer, P. & Pogatscher, S., 2016, In: Scripta materialia. 112, p. 148-151

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Untersuchungen zur Koagulation wertmetallhaltiger Partikel in Elektroofenschlacken der Kupferprimärindustrie

    Wibner, C., 2016

    Research output: Thesis › Master's Thesis

  23. Published

    Verhalten diverser Elemente bei der Kupferraffinationselektrolyse

    Sorger, C., 2016

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Wärmekapazität von Salzschlacken

    Luidold, S., 2016

    Research output: Book/Report › Commissioned report › Research

  25. 2015
  26. Published

    Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system

    Povoden-Karadeniz, E., Lang, P., Moszner, F., Pogatscher, S., Ruban, A. V., Uggowitzer, P. & Kozeschnik, E., 1 Dec 2015, In: Calphad. 51, p. 314-333 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Studie: Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Endpräsentation

    Adam, J., Kapeller, J. & Luidold, S., 27 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Projektpräsentation - Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminiumlegierungen

    Werinos, M. & Antrekowitsch, H., 18 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis

    Angerer, T., 5 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis

    Angerer, T. & Hofer, S., 4 Nov 2015.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Kinetics and Optimization of Refractory Metal Alloy Oxidation and Sublimation

    Ratschbacher, K. & Luidold, S., 1 Nov 2015, In: Chemie-Ingenieur-Technik. 87, 11, p. 1558-1568 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Nov 2015, In: Metall. 69, 11, p. 431-435

    Research output: Contribution to journal › Article › Research

  33. Published

    Hauptexkursion des Lehrstuhls für Nichteisenmetallurgie der Montanuniversität Leoben 2015

    Wegscheider, S. & Steinacker, S., Nov 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68.2015, 6, p. 367-369 3 p.

    Research output: Contribution to journal › Article › Transfer

  34. Published

    Thermodynamic Considerations for Primary Copper Flue Dust

    Steinacker, S. & Antrekowitsch, J., Nov 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68, 6/2015, p. 328-335

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Nichteisenmetallurgie

    Antrekowitsch, H., Luidold, S., Antrekowitsch, J., Pogatscher, S. & Steinlechner, S., 30 Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 11, p. 495-500 6 p.

    Research output: Contribution to journal › Article › Research

  36. Published

    CDL Evaluierung 2015

    Pichler, C., 29 Oct 2015.

    Research output: Contribution to conference › Presentation › Transfer › peer-review

  37. Published

    Der 2sDR Prozess als alternatives Aufarbeitungsverfahren für Stäube der Stahlindustrie

    Wegscheider, S., 29 Oct 2015.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Holzkohlen und Pyrolysegas aus Biomassen als Reduktionsmittel im Recycling von Schwermetallen - Reduktionsmittel in der Aufarbeitung Cr-Ni-haltiger Rückstände

    Rösler, G., 29 Oct 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Problematik der Halogene in sekundären Zinkoxiden

    Benigni, C., 29 Oct 2015.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Recycling Techniques for Zinc-Containing Residues from the Secondary Copper Industry

    Steinacker, S., 27 Oct 2015.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Einfluss von Legierungselementen auf das Eigenschaftsprofil von Aluminium-Knetwerkstoffen der 7xxx-Serie

    Scheiber, S., 21 Oct 2015, 116 p.

    Research output: Other contribution › Research

  42. Published

    State of the Art in Steel Mill Dust Recycling

    Antrekowitsch, J., Rösler, G. & Steinacker, S., 8 Oct 2015, In: Chemie-Ingenieur-Technik. 87, 11, p. 1498-1503

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Ab initio study on stacking faults in gamma-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2 Oct 2015.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Atom probe tomography investigations of modified early stage clustering in Si-containing aluminum alloys

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P., 1 Oct 2015, In: Acta Physica Polonica A. 128, 4, p. 643-646 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Problematik der Halogene im Wälzoxid

    Benigni, C., 29 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Recycling industrieller Reststoffe

    Wegscheider, S., 29 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Verbesserung der Produktqualität (Zinkoxide, edelmetallhaltige Materialien)

    Steinlechner, S., 29 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Agglomeration und Recycling von metallhaltigen Stäuben und Schlämmen

    Zöhrer, M., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Transfer

  49. Published

    Influence of the raw material on the melt quality of aluminium alloys

    Doppler, T., 23 Sept 2015.

    Research output: Contribution to conference › Poster › Research

  50. Published

    The role of minor metals in the recycling of industrial residues

    Steinlechner, S., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Agglomeration und Recycling aluminiumhaltiger Reststoffe

    Zöhrer, M., 17 Sept 2015.

    Research output: Contribution to conference › Presentation › Transfer

  52. Published

    Projektvorstellung - Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T., 17 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

Previous 1...13 14 15 16 17 18 19 20 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204