Chair of Metal Forming (560)

Organisational unit: Chair

651 - 700 out of 731Page size: 50

Research output

  1. 2005
  2. Published

    Bestimmung der Reibzahl mittels Ringstauchversuch

    Hatzenbichler, T., Buchmayr, B., Hochmann, H., Fössl, T. & Zink, A., 2005, Sommerschule Steiermark. p. 161-170

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Blechprüfung

    Sommitsch, C. & Buchmayr, B., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Comparison of fracture criteria at high temperatures for nickel-based alloys

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, Steelsim 2005. p. 575-588

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Development of microstructure in forging alloy 718

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, Steelsim 2005. p. 463-471

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Ductile fracture analysis with damage models of effective stresses at high temperatures

    Sommitsch, C. & Rüf, G., 2005, 8th ICTP 2005. p. 327-328

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

    Sommitsch, C., Poelt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Steiermark. p. 113-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Einfluss der Rezipientenreibung auf die Prozessparameter beim direkten Strangpressen

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, XXIV. Verformungskundliches Kolloquium. p. 53-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, XXIV. Verformungskundliches Kolloquium. p. 139-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    "Feinabstimmung des Teilmodells" Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Finite Elemente Berechnung eines Langschmiedeprozesses

    Wallner, S., Harrer, O.-K. & Wieser, V., 2005, XXIV. Verformungskundliches Kolloquium. p. 157-165

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Gefügemodelle für die Warmformgebung

    Sommitsch, C. & Buchmayr, B., 2005, Freiberger Forschungsforum, 56. Berg- und Hüttenmännischer Tag. p. 16-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Gesenkschmieden von Portalachsen - Simulation und praktische Erfahrung

    Hein, G., Kollingbaum, M., Hatzenbichler, T. & Wollendorfer, G., 2005, XXIV. Verformungskundliches Kolloquium. p. 193-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Gesenkschmiedetechnik - eine systemanalytische Betrachtung

    Buchmayr, B., 2005, Sommerschule Schmiedetechnik. p. 7-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Goals, Recent developments and critical issues in modelling of hot rolling, forging, heat treatment and prediction of material properties

    Buchmayr, B., 2005, Steelsim 2005. p. 2-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of container friction on the main process parameters in direct extrusion

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, In: Steel grips : journal of steel and related materials. 3, p. 126-129

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of TRIP on the residual stress development during heat treatment of high alloyed cast irons

    Raberger, R., Buchmayr, B. & Brandner, M., 2005, IDE200, Internationale Konferenz, Distortion Engineering. p. 365-371

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Measurement of marcoscopic residual stress and resulting distortion during machining

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, Materials Science and Technology 2005 - Proceedings of the Conference. p. 109-118 10 p. (Materials Science and Technology; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Methods of controlling the cross-section in rolling mills for long products

    Harrer, O.-K., Hatzenbichler, T., Kostúr, K., Pástor, M. & Truchlý, M., 2005, In: Steel grips : journal of steel and related materials. 3, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Microstructure Simulation in Radial Forging of Nickel Base Alloys

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, The 8th ESAFORM Conference on Material Forming. p. 515-518

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Numerical simulation of forging alloy 718

    Harrer, O.-K., Wallner, S. & Wieser, V., 2005, 8th ICTP 2005. p. 325-326

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    On the determination of the recrystallised fraction during hot forming

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In: Steel grips : journal of steel and related materials. 3, p. 287-293

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Optimisation of complex heating furnace - hot rolling mill by simulation system

    Kostúr, K., Harrer, O.-K. (Editor), Pástor, M. & Truchlý, M., 2005, Kosice.

    Research output: Book/Report › Scholarly edition

  24. Published

    Optimized rod rolling to achieve desired mechanical properties

    Sommitsch, C., Roveda, M., Gaudenzi, N. & Buchmayr, B., 2005, Steelsim 2005. p. 407-419

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Optimizing the forging of critical aircraft parts by the use of finite element coupled microstructure modeling

    Stockinger, M. & Tockner, J., 2005, p. 87-95. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  26. Published

    Projektbericht "Input data for the numerical simulation" Projekt P056-01-07

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Projektbericht "Simulation of Radial Forging" Projekt P056-01-07

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Projektbericht "Stand der Simulation des Walzprozesses" Projekt MCL M8, Oktober 2005,

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Projektbericht "Stand der Simulation des Walzprozesses" Projekt MCL M8, September 2005

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Projektbericht zu "Stand der Simulation des Walzprozesses" Projekt MCL M8, Dezember 2005,

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Projektstatus Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Quartalsbericht 01/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Quartalsbericht 01/2005 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Quartalsbericht 02/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Quartalsbericht 02/2005 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Quartalsbericht 03/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Quartalsbericht 03/2005 Projekt MCL M7 Optimierung der Umformbedingungen beim Langsschmieden von Nickelbasislegierungen

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Quartalsbericht 04/2004 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Quartalsbericht 04/2004 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Report III on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Report II on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Report IV on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Report on the simulation of ORI configuration rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Residual stresses in IN 718 turbine disks

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, p. 527-538. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Simulation des Reckschmiedens - ein Erfahrungsbericht

    Harrer, O.-K., Wallner, S. & Wieser, V., 2005, Sommerschule Steiermark. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Sommerschule Schmiedetechnik

    Buchmayr, B. (Editor), 2005, Leoben: Lehrstuhl für Umformtechnik. Bruno Buchmayr.

    Research output: Book/Report › Anthology › Research

  47. Published

    Spray forming and post processing of superalloy rings

    Walter, M., Stockinger, M., Tockner, J., Ellendt, N. & Uhlenwinkel, V., 2005, p. 429-440. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    The mathematical modelling of furnace for effeciency optimisation with rolling mill

    Pástor, M., Kostur, K., Harrer, O.-K. & Truchlý, M., 2005, In: Acta metallurgica Slovaca. p. 265-270

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Über die Bestimmung des rekristallisierten Anteils bei Warmumformung

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, XXIV. Verformungskundliches Kolloquium. p. 113-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Versuche zur Ermittlung von Eingabeparametern für die numerische Simulation

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Werkstoff-Verformbarkeit in Blechumformprozessen unter Berücksichtigung der Umformhistorie

    Ofenheimer, A., Buchmayr, B. & Cerjak, H., 2005, XXIV. Verformungskundliches Kolloquium. p. 21-29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...10 11 12 13 14 15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben