Chair of Mechanical Engineering (140)

Organisational unit: Chair

701 - 800 out of 1,376Page size: 100

Research output

  1. 2013
  2. Published

    Calculation Approach for the Assessment of Fretting

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: ATZ worldwide. 115, 12, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Comparative damage analysis of two cylinder heads

    Huter, P., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Comparison and Evaluation of Damage Indicated Thermo-Mechanical Fatigue Life Prediction for Cylinder Head Application

    Huter, P., 2013, Seventh International Conference on Low Cycle Fatigue. p. 565-572

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Comprehensive Study of ZDDP-tribofilms Formed under Soft Contact Conditions

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Contact fatigue life investigation and wear mechanisms of gears

    Trausmuth, A., Godor, I. & Dietrich, A., 2013, ÖTG Symposium 2013. p. 169-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Damage oriented tribological model testing for internal combustion engines – Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Trausmuth, A. & Krampl, H., 2013, In: Tribologie und Schmierungstechnik. 60, p. 5-12

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Different microstructures in the HAZ of double submerged arc welded pipelines and how they influence the fatigue crack growth

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013,

    Proceedings of the ASME 2013 Pressure Vessels & Piping Conference (PVP2013)

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Distortion analysis of a welded corner stiffening frame considering manufacturing restraining conditions

    Stoschka, M., Loose, T. & Barsoum, Z., 2013, In: Computers & Structures.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety. p. 1022-1028 7 p. (28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Effect of high-strength filler metals on the fatigue behaviour of butt joints

    Stoschka, M., Leitner, M., Posch, G. & Eichlseder, W., 2013, In: Welding in the world. 57, p. 85-96

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Einfluss von Legierung und Wärmebehandlung auf thermomechanische Eigenschaften von Zylinderköpfen

    Stauder, B., Stika, P., Rafetzeder, M. & Huter, P., 2013, Energieeffizienz bei der Herstellung und dem Einsatz von Gussteilen. p. x-x

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Erstellung einer geschlossenen Simulationskette zur Optimierung der Schwingfestigkeit von geschmiedeten Bauteilen aus Nickelbasislegierungen

    Maderbacher, H., 2013

    Research output: Thesis › Doctoral Thesis

  16. Published

    Erweiterung des FKM-konformen Ermüdungsfestigkeitsnachweises für nichtproportionale Beanspruchungen

    Leitner, B., 2013, 152 p.

    Research output: Thesis › Master's Thesis

  17. Published

    Fatigue Life Calculation of Short Fibre Reinforced Thermoplastic Parts

    Mösenbacher, A., Pichler, P., Brunbauer, J., Guster, C. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Gewichtsoptimierung und betriebsfeste Bewertung einer Seilkranlaufkatze

    Primetzhofer, A., 2013, 99 p.

    Research output: Thesis › Diploma Thesis

  19. Published

    Grundlagenversuche mit Proben aus Lenkgehäusen

    Maderbacher, H., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Influence of elevated temperature on the HCF behaviour of thin sheet metals

    Strohhäussl, B., 2013, Seventh International Conference on Low Cycle Fatigue. p. 371-376

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of micro-shrinkage on the fatigue behavior of ductile iron

    Kainzinger, P., Guster, C., Severing, M. & Wolf, A., 2013, 13th International Conference on Fracture. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigations of Wear on System Camshaft/Tappet

    Wohlfahrt, M., Grün, F. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Komponentenprüfung von Kegelrädern

    Wohlfahrt, M., Winter, G. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013, Die Betriebsfestigkeit als eine Schlüsselfunktion der Zukunft. p. 301-316

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Lebensdauerbewertung von Platten aus gegossenem Aluminiumknetwerkstoff AlMg4,5Mn0,7

    Doutio Nana, E. F., 2013, 112 p.

    Research output: Thesis › Diploma Thesis

  28. Published

    Legierungs- und Wärmebehandlungseinfluss auf thermomechanische Eigenschaften von Aluminium-Zylinderköpfen

    Stauder, B., Stika, P., Rafetzeder, M., Huter, P. & Bischoff, T., 2013, newcast Forum Proceedings. p. 57-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Local fatigue assessment of welded and high frequency mechanical impact treated joints

    Leitner, M., 2013, 127 p.

    Research output: Thesis › Doctoral Thesis

  31. Published

    Machbarkeitsanalyse zur Risikoabschätzung

    Hopmann, C., Gröger, T., Erler, I., Steyrl, M., Guttmann, P. & Mösenbacher, A., 2013, In: Kunststoffe. 08, p. 74-77

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Mikrostrukturelle Einflüsse auf das HCF-Ermüdungsverhalten von Al-Kokillenguss und Einbindung der Gießsimulation in die betriebsfeste Bauteilauslegung

    Redik, S., Guster, C., Ehart, R. & Schächtl, R., 2013, Potenziale für die nächste Generation von Fahrzeugantrieben. p. 199-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Novel trends in journal slide bearing technology - active use of tribochemical effects

    Offenbecher, M., Li, H., Lainé, E., Grün, F. & Pondicherry, K., 2013, Proceedings of CIMAC World Congress on Combustion Engine Technology. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Numerical simulation loop to investigate the local fatigue behaviour of welded and HFMI-treated joints: XIII-WG2-136-13

    Simunek, D., Leitner, M. & Stoschka, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  35. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    Optimization of the piston ring - cylinder liner system in gas-engines for power generation

    Schiffer, J., Krampl, H., Godor, I., Grün, F., Betz, M. & Laiminger, S., 2013, 27th CIMAC World Congress on Combustion Engine Technology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Planung, Erfassung und Auswertung von Betriebsfestigkeitsversuchen unter Berücksichtigung statistischer Methoden

    Ludwig, C., 2013, 112 p.

    Research output: Thesis › Diploma Thesis

  38. Published

    Pneumatic Impact Treatment (PIT) – Application and Quality Assurance: XIII-WG2-138-13

    Gerster, P., Schäfers, F. & Leitner, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  39. Published

    Process Methodology of Parameter Finding with an Enhanced Lifetime Model Used for Thermo-Mechanical Fatigue

    Huter, P., 2013, International Conference Proceedings 2013. p. 249-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Product Development: Feasibility Analysis for Risk Assessment

    Hopmann, C., Gröger, T., Erler, I., Steyrl, M., Guttmann, P. & Mösenbacher, A., 2013, In: Kunststoffe <München> / Kunststoffe international. 08, p. 59-62

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Schadensanalyse eines Chippo Klingenhalters

    Mösenbacher, A., Leitner, M. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Schwingfestigkeitsuntersuchung der WEZ einer Schweißnaht eines hochfesten Feinkornbaustahls

    Maier, B. & Ottersböck, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Schwingfestigkeit von ferritischem Gusseisen mit Kugelgraphit: Größeneffekte unter dem Einfluss von Defekten

    Kainzinger, P., 2013, 244 p.

    Research output: Thesis › Doctoral Thesis

  44. Published

    Simulating the Fatigue Life of Fiber-Reinforced Injection Moldings

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 92-94

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Simulation der Lebensdauer faserverstärkter Spritzgussteile

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe. p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation der Schlagverfestigung von gekerbten Rundproben mittels Nadelhammer

    Lettner, A., 2013

    Research output: Thesis › Diploma Thesis

  47. Published

    Strain Localization under Fatigue Loading

    Reiser, J., 2013

    Research output: Thesis › Doctoral Thesis

  48. Published

    Structural analysis of a drill bit including result interpretation for cyclic loading

    Maderbacher, H., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Studie des transienten Verfestigungsverhaltens für ein- und mehrlagige Verbindungen

    Stoschka, M., Ottersböck, M. & Leitner, M., 2013, Proceedings of the Simulation Forum FWS 2013. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Study of kinematic strain hardening law in transient welding simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena : [... papers presented at the 10th International Seminar "Numerical Analysis of Weldability", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria ; ... the meeting was organized by the Institute for Materials Science and Welding (IWS) of Graz University of Technology ...] . Vol. 10. p. 255-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Study of Kinematic Strain Hardening Law in Transient Welding Simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena 10. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Study of the local notch stress HFMI master S/N-curve approach on high-strength steel joints

    Stoschka, M., Leitner, M. & Barsoum, Z., 2013, Proceedings of the 2nd Swedish Conference on Design and Fabrication of Welded Structures. p. 76-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    The fatigue endurance limit of a high strength CrNi steel in a fretting dominated regime

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2013, In: Tribology International. 59, p. 97-103

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Thermomechanische Ermüdung von bauteilnahen zylindrischen Hohlkörpern

    Spary, M., 2013

    Research output: Thesis › Diploma Thesis

  56. Published

    TMF on Tube Specimen and Material Parameter Approximation

    Stanojevic, A., 2013, TMF on Tube Specimen and Material Parameter Approximation. DAS Secretariat, p. 203-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    TMF on Tube Specimen and Material Parameter Approximation

    Stanojevic, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013, World Tribology Congress 2013. p. 753-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Tribological test principles for power train applications

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Trausmuth, A., 2013, Proceedings of 2nd Oildoc Conference and Exhibition. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Tribometric Development Tools for Journal Bearings – a novel test adapter

    Grün, F., Krampl, H., Schiffer, J., Moder, J., Godor, I. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Untersuchung der Entstehung und Umlagerung von mechanisch und thermisch induzierten Eigenspannungen für die Nickelbasis-Legierung Inconel® 718

    Wagner, C. E., 2013

    Research output: Thesis › Diploma Thesis

  63. Published

    Vergleichende HCF- und TMF-Untersuchungen an einem Al-Si-Cu Gusswerkstoff

    Huter, P. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Vergleich von zwei Feinkornbaustählen mittels bruchmechanischer und statischer Kennwerte

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Vom tribologischen Modellversuch zur Bauteilprüfung

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Werkstoffverhalten eines beschichteten Stahlbandes - Teil 2

    Wohlfahrt, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. 2012
  68. Published

    Tribological functionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K. S., Gódor, I., Offenbecher, M. & Lainé, E., 1 Dec 2012, In: Wear. 298-299.2013, 15 February, p. 127-134 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    A closed concept to associate the hot-forging process controlled microstructure with fatigue life

    Stoschka, M., Stockinger, M., Maderbacher, H. & Riedler, M., 2 Oct 2012, Superalloys 2012 - Proceedings of the 12th International Symposium on Superalloys. p. 625-631 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    VERFAHREN UND VORRICHTUNG ZUR PRÜFUNG EINES PROBEKÖRPERS UNTER KOMBINIERTER UMLAUFBIEGE- UND TORSIONSBEANSPRUCHUNG

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 15 Apr 2012, IPC No. G01N 3/ 32 A I, Patent No. AT550638T, Priority date 14 Oct 2005, Priority No. AT20050001685

    Research output: Patent

  71. Published

    1st Preliminary Report - Sehitoglu Material Characterisation of cast iron and cupper based alloys

    Huter, P. & Winter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    2. Zwischenbericht (FFG-Bridge): FestOptAlGuss - Entwicklung von Materialmodellen für die festigkeitstechnische Optimierung von hochbelasteten Aluminium-Gusskomponenten

    Guster, C. & Redik, S., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    3rd Fatigue Sypmposium, Lightweight Design

    Eichlseder, W. (Editor) & Grün, F. (Editor), 2012, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  74. Published

    Abschätzung der lokalen Wöhlerlinie von Gusseien mit Kugelgraphit aus der Gießsimulation

    Kainzinger, P., Guster, C., Severing, M. & Wolf, A., 2012, DVM-Bericht 139, 39. Tagung des DVM-Arbeitskreises Betriebsfestigkeit. p. 379-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Abschätzung der lokalen Wöhlerlinie von Gusseisen mit Kugelgraphit aus der Gießsimulation

    Kainzinger, P., Guster, C., Severing, M. & Wolf, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Abschlussbericht zweites Projektjahr - AP2: Erhöhung der Zuverlässigkeit und des Wirkungsgrades des Systems Kolbenring-Zylinderlaufbahn-Schmierstoff von Großgasmotoren

    Schiffer, J., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Auslegung und Konstruktion eines Harvesterkopfs in Leichtbauweise

    Oppliger, F., 2012, 104 p.

    Research output: Thesis › Diploma Thesis

  78. Published

    Austempered Ductil Iron - Improvement of Fatigue Behaviour and Application of Casting Simulation

    Wohlfahrt, M., Kainzinger, P. & Guster, C., 2012, 3rd Fatigue Symposium Leoben. p. 45-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Automated Parameter Finding Procedure for Material Parameters of TMF-Hysteresis

    Huter, P., 2012, 3rd Fatigue Symposium Conference Transcript. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Automatic Determination of Crack Parameters for TMF Loaded Specimen

    Stanojevic, A., 2012, 29th Danubia-Adria Symbosium on Experimental Methods in Solid Mechanics. p. 12-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Automatic Determination of Crack Parameters for TMF Loaded Specimen

    Stanojevic, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  82. Published

    Automatische Parameterermittlung von thermo-mechanisch beanspruchten Proben

    Stanojevic, A., 2012

    Research output: Thesis › Diploma Thesis

  83. Published

    Bearbeitungs- und Instrumentierungsvorschläge zur Echtzeiterfassung der Einwirkungen an Abbauwerkzeugen von Tunnelbohrmaschinen

    Bumberger, T., 2012

    Research output: Thesis › Diploma Thesis

  84. Published

    Berechnung von Thermospannungen in einem geklebten Keramik-GFK-Verbund nach der Aushärtung

    Mösenbacher, A., Maderbacher, H. & Guster, C., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Betriebsfeste Auslegung im Leichtbau

    Eichlseder, W. & Guster, C., 2012, Energieeffiziente Mobilität: Chancen der Werkstoff- und Prozesstechnologie. p. 185-195

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Betriebsfestigkeitsmodell von Bauteilen unter komplexen Beanspruchungen

    Christiner, T. K., 2012, 128 p.

    Research output: Thesis › Doctoral Thesis

  87. Published

    Charakterisierung von wälzbeanspruchten Maschinenelementen durch tribologische Versuchstechnik

    Magritzer, M., 2012, 97 p.

    Research output: Thesis › Diploma Thesis

  88. Published

    Comparison of Fatigue Behavior of Different Materials under Rolling Contact Fatigue

    Magritzer, M., Wohlfahrt, M., Guster, C., Godor, I. & Grün, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Contribution to the fatigue enhancement of thin-walled, high-strength steel joints by high frequency mechanical impact treatment: IIW-Document XIII-2416-12

    Leitner, M., Stoschka, M. & Eichlseder, W., 2012

    Research output: Non-textual form › Web publication/site › Research

  90. Published

    Damage oriented tribological model testing for internal combustion engines - Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Pondicherry, K., Trausmuth, A. & Krampl, H., 2012, Technische Akademie Esslingen. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Design of test methodologies for fretting investigations

    Strohhäussl, B., Reiser, J., Godor, I. & Grün, F., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 287-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Development of a FE-based fracture mechanical method for fatigue life assessment of double-submerged welded pipelines considering residual stresses and local microstructures

    Maier, B., Oberwinkler, B., Tichy, R. & Ecker, W., 2012, 19th European Conference on Fracture - Book of Abstracts. p. 114-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 311-314

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    EFFECT OF HIGH-STRENGTH FILLER METALS ON FATIGUE

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2012, In: Welding in the world. 56, 3-4, p. 20-29

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Einfluss multiaxialer Beanspruchung auf das Ermüdungsverhalten von Austempered Ductile Iron und Maraging Stahl

    Zivkovic, I., 2012, 106 p.

    Research output: Thesis › Diploma Thesis

  97. Published

    Endbericht (FFG): Austempered Ductile Iron - Festigkeitssteigerung unter komplexer Betriebsbeanspruchung

    Wohlfahrt, M. & Guster, C., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Endbericht FFG-Bridge: Kunststoff-Funktionsbauteile

    Guster, C. & Mösenbacher, A., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Estimating the Local Fatigue Strength of EN-GJS-400

    Kainzinger, P. & Guster, C., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 26-33

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Fatigue assessment of welded high-strength steel joints using the local notch stress approach

    Simunek, D., Leitner, M. & Stoschka, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Fatigue behaviour of a short glass fibre reinforced polyamide: Effect of notches and temperature

    Mösenbacher, A. & Guster, C., 2012, 3rd Fatigue Symposium Leoben Lightweight Design. p. 152-160

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Fatigue Life Investigations of Different Case Hardened Specimens under Rolling Contact Loading for Gears

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Grün, F. & Eichlseder, W., 2012, 3rd Fatigue Sypmposium. p. 295-310

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...4 5 6 7 8 9 10 11 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401