Chair of Mechanical Engineering (140)

Organisational unit: Chair

251 - 300 out of 1,376Page size: 50

Research output

  1. 2019
  2. Published

    Numerical crack growth study on porosity afflicted cast steel specimens

    Schuscha, M., Leitner, M., Stoschka, M., Pusterhofer, S. & Meneghetti, G., 1 Apr 2019, In: Frattura ed integrità strutturale. 13.2019, 48, p. 58-69 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Challenges of friction reduction of engine plain bearings – Tackling the problem with novel bearing materials

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 1 Mar 2019, In: Tribology International. 131.2019, March, p. 238-250 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Effects of High Frequency Mechanical Impact on Fatigue Life of Semi-Automated Gas Metal Arc Welding (GTAW) of HSLA Butt Weld

    Saidin, S., Andud, D., Manurung, Y., Faiz Mat, M., Nordin, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 7 p., 06002.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Fatigue Life Enhancement of Transverse and Longitudinal T Joint on Offshore Steel Structure HSLAS460G2+M using Semiautomated GMAW and HFMI/PIT

    Andud, D., Faiz Mat, M., Manurung, Y., Saidin, S., Nordin, N., Muhammad, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 6 p., 06001.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens

    Simunek, D., Leitner, M., Maierhofer, J., Gänser, H.-P. & Pippan, R., 3 Feb 2019, In: Metals : open access journal . 9.2019, 2, p. 184 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 Feb 2019, In: Welding in the world. 63.2019, 1 May, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Reproducibility of navigation based kinematic analysis of the knee – A cadaveric investigation

    Maderbacher, G., Keshmiri, A., Springorum, H. R., Maderbacher, H., Grifka, J. & Baier, C., 1 Jan 2019, In: Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association . 24.2019, 1, p. 128-135 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks

    Leitner, M., Simunek, D., Maierhofer, J., Gänser, H.-P. & Pippan, R., 1 Jan 2019, In: Metals : open access journal . 9.2019, 2, 13 p., 156.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Analysis on Substrate Distortion Analysis Induced by Wire Arc Additive Manufacturing of SS316L using FEM Simulation with Simplified Meshing and Different Heat Source Models

    Faiz Mat, M., Manurung, Y., Muhammad, N., Nursyahirah Binti Ahmad , S., Helena Sipi Anak Pengadau , F., Prüller, S. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Analytical and numerical simulation of fatigue crack propagation under constant amplitude loading on SENT specimen with experimental verification

    Olanrewaju Busari, Y., Manurung, Y., Ariri , A., Alva, S., Sebayang, D., Nordin, N. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Aufbau einer modularen Prüfmethodik zur betriebsfesten Charakterisierung von gussrauen Randschichten

    Oberreiter, M., 2019

    Research output: Thesis › Master's Thesis

  20. Published

    Aufbau einer numerischen Simulationskette zur automatisierten Ermüdungsfestigkeitsbewertung von Stahlgussdefekten

    Horvath, M., 2019

    Research output: Thesis › Master's Thesis

  21. Published

    Ausarbeitung eines Konzeptes für einen Getriebeaufsatz zur Kompensierung regulärer und irregulärer Belastungen

    Rosner, T., 2019

    Research output: Thesis › Master's Thesis

  22. Published

    Auslegung thermomechanisch gefertigter Strukturen

    Grün, F. & Leitner, M., 2019, Proceedings zu Neue Technologien und Innvoationen in der Fahrzeugtechnik XVI. Steyr, p. 1 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Betriebsfestigkeitsbewertung HFMI-nachbehandelter Schweißverbindungen auf Basis lokaler Konzepte

    Gerstbrein, S., 2019

    Research output: Thesis › Master's Thesis

  24. Published

    Characterising the fatigue strength of aluminium castings by applied statistical evaluation of imperfections

    Aigner, R., 2019

    Research output: Thesis › Doctoral Thesis

  25. Published

    Consideration of ageing effects during the TMF test on the stress-strain behaviour of an aluminium alloy

    Seisenbacher, B., Winter, G. (Co-editor) & Grün, F. (Co-editor), 2019.

    Research output: Contribution to conference › Abstract

  26. Published

    Effect of surface condition on the fatigue strength of selectively laser melted metallic structures

    Leitner, M., Schneller, W., Springer, S., Beter, F. & Grün, F., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-WG4-171-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Einfluss der Randschicht auf die Ermüdungsfestigkeit additiv gefertigter Aluminiumbauteile

    Springer, S., 2019

    Research output: Thesis › Master's Thesis

  28. Published

    Einfluss von Vorkorrosion auf die statische und zyklische Festigkeit von Al-Druckgussbauteilen

    Schönowitz, M., 2019

    Research output: Thesis › Master's Thesis

  29. Published

    Entwicklung einer Prüfvorrichtung für Hochtemperaturversuche an einem elektrodynamischen Shaker

    Prommegger, M., 2019

    Research output: Thesis › Master's Thesis

  30. Published

    Entwicklung und Validierung einer Prüfmethodik zur Charakterisierung des dynamischen Verhaltens von geschraubten Fügestellen

    Himmelbauer, F., 2019

    Research output: Thesis › Master's Thesis

  31. Published

    Ermüdungsfestigkeitsbewertung geschweißter und HFMI-nachbehandelter Stahlstrukturen

    Leitner, M., 2019, DEUTLICH GÜNSTIGERE AUSLEGUNG SCHWINGEND BEANSPRUCHTER KONSTRUKTIONEN: Große Einsparpotenziale mit Bemessungsgrundlagen nach neuen HFMI-Richtlinien (IIW/DASt). Duisburg

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Evaluation of wood cutting forces in dry and wet conditions by small-scale hipping tests applying different analysis methods

    Pichler, P., Springer, S. & Leitner, M., 2019, In: Wood Material Science & Engineering . 14.2019, 3, p. 185-190 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Experimentelle und numerische Untersuchungen zum Einfluss der Einspannung beim WAAM-Prozess

    Wallner, D., 2019

    Research output: Thesis › Master's Thesis

  34. Published

    Fatigue design of metallic components considering bulk and surface imperfections

    Leitner, M., Schneller, W., Pusterhofer, S. & Stoschka, M., 2019, Intermediate Meeting of IIW Commission XIII: IIW Document XIII-WG4-167-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2818-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Fatigue strength of welded joints and additively manufactured structures

    Grün, F. & Leitner, M., 2019, Proceedings International FEMFAT User Meeting 2019: Fatigue Analysis of Joint Connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Faiz Mat, M., Minggu, Z., Prüller, S. & Leitner, M., 2019, 6th International Conference on Advances in Mechanical Engineering 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Grain growth prediction of bead-on-plate with filler wire SS316L using FEM

    Faiz Mat, M., Manurung, Y., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 2019, 6th International Conference on Advances in Mechanical Engineering 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 2019, Procedia Structural Integrity: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition. Vol. 19. p. 556 - 565 10 p. (Procedia Structural Integrity).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous slab caster

    Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 2019, AISTech - Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 1441-1449 9 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Novel model test configuration for investigation of cam/tappet contacts

    Grün, F., Gódor, I., Summer, F. & Moizan, S., 2019, p. 1-2.

    Research output: Contribution to conference › Abstract › peer-review

  42. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2019, In: Machines : open access journal . 7.2019, 1, 1.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Numerische Analyse ausgewählter Versagensmechanismen bei hochbelasteten Verzahnungen

    Berner, M., 2019

    Research output: Thesis › Master's Thesis

  44. Published

    Numerische Modellierungsstrategien von schalenmodellbasierten Schweißverbindungen

    Bittendorfer, M., 2019

    Research output: Thesis › Master's Thesis

  45. Published

    Numerische und experimentelle Analyse eines drahtbasierten additiven Herstellprozesses

    Berger, R., 2019

    Research output: Thesis › Master's Thesis

  46. Published

    Short and long crack growth of aluminium cast alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 2019, Structural Integrity: Mechanical Fatigue of Metals. 7 ed. Springer, p. 139-145 7 p. (Structural Integrity; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  47. Published

    Structural FE-analysis of porous laser welded aluminium die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2791-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Technological aspects in fatigue design

    Leitner, M., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  49. Published

    Thermal relaxation of residual stresses in Ti-6-4

    Stanojevic, A., Oberwinkler, B. & Leitner, M., 2019, The World Conference on Titanium (Ti-2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Thermo-mechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 2019.

    Research output: Contribution to conference › Abstract

  51. Published

    Transient Temperature and Substrate Distortion Analysis Induced by Wire Arc Additive Manufacturing of SS316L using Experiment and FEM with Simplified Bead Model

    Nursyahirah Binti Ahmad , S., Manurung, Y., Faiz Mat, M., Minggu, Z., Helena Sipi Anak Pengadau , F., Prüller, S. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 7 8 9 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401