Chair of Mechanical Engineering (140)

Organisational unit: Chair

701 - 750 out of 1,376Page size: 50

Research output

  1. 2013
  2. Published

    Calculation Approach for the Assessment of Fretting

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: ATZ worldwide. 115, 12, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Comparative damage analysis of two cylinder heads

    Huter, P., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Comparison and Evaluation of Damage Indicated Thermo-Mechanical Fatigue Life Prediction for Cylinder Head Application

    Huter, P., 2013, Seventh International Conference on Low Cycle Fatigue. p. 565-572

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Comprehensive Study of ZDDP-tribofilms Formed under Soft Contact Conditions

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Contact fatigue life investigation and wear mechanisms of gears

    Trausmuth, A., Godor, I. & Dietrich, A., 2013, ÖTG Symposium 2013. p. 169-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Damage oriented tribological model testing for internal combustion engines – Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Trausmuth, A. & Krampl, H., 2013, In: Tribologie und Schmierungstechnik. 60, p. 5-12

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Different microstructures in the HAZ of double submerged arc welded pipelines and how they influence the fatigue crack growth

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013,

    Proceedings of the ASME 2013 Pressure Vessels & Piping Conference (PVP2013)

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Distortion analysis of a welded corner stiffening frame considering manufacturing restraining conditions

    Stoschka, M., Loose, T. & Barsoum, Z., 2013, In: Computers & Structures.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety. p. 1022-1028 7 p. (28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Effect of high-strength filler metals on the fatigue behaviour of butt joints

    Stoschka, M., Leitner, M., Posch, G. & Eichlseder, W., 2013, In: Welding in the world. 57, p. 85-96

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Einfluss von Legierung und Wärmebehandlung auf thermomechanische Eigenschaften von Zylinderköpfen

    Stauder, B., Stika, P., Rafetzeder, M. & Huter, P., 2013, Energieeffizienz bei der Herstellung und dem Einsatz von Gussteilen. p. x-x

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Erstellung einer geschlossenen Simulationskette zur Optimierung der Schwingfestigkeit von geschmiedeten Bauteilen aus Nickelbasislegierungen

    Maderbacher, H., 2013

    Research output: Thesis › Doctoral Thesis

  16. Published

    Erweiterung des FKM-konformen Ermüdungsfestigkeitsnachweises für nichtproportionale Beanspruchungen

    Leitner, B., 2013, 152 p.

    Research output: Thesis › Master's Thesis

  17. Published

    Fatigue Life Calculation of Short Fibre Reinforced Thermoplastic Parts

    Mösenbacher, A., Pichler, P., Brunbauer, J., Guster, C. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Gewichtsoptimierung und betriebsfeste Bewertung einer Seilkranlaufkatze

    Primetzhofer, A., 2013, 99 p.

    Research output: Thesis › Diploma Thesis

  19. Published

    Grundlagenversuche mit Proben aus Lenkgehäusen

    Maderbacher, H., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Influence of elevated temperature on the HCF behaviour of thin sheet metals

    Strohhäussl, B., 2013, Seventh International Conference on Low Cycle Fatigue. p. 371-376

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of micro-shrinkage on the fatigue behavior of ductile iron

    Kainzinger, P., Guster, C., Severing, M. & Wolf, A., 2013, 13th International Conference on Fracture. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigations of Wear on System Camshaft/Tappet

    Wohlfahrt, M., Grün, F. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Komponentenprüfung von Kegelrädern

    Wohlfahrt, M., Winter, G. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Lebensdauerberechnung an Strukturbauteilen aus kurzfaserverstärkten Thermoplasten

    Mösenbacher, A., Pichler, P., Guster, C., Brunbauer, J. & Pinter, G., 2013, Die Betriebsfestigkeit als eine Schlüsselfunktion der Zukunft. p. 301-316

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Lebensdauerbewertung von Platten aus gegossenem Aluminiumknetwerkstoff AlMg4,5Mn0,7

    Doutio Nana, E. F., 2013, 112 p.

    Research output: Thesis › Diploma Thesis

  28. Published

    Legierungs- und Wärmebehandlungseinfluss auf thermomechanische Eigenschaften von Aluminium-Zylinderköpfen

    Stauder, B., Stika, P., Rafetzeder, M., Huter, P. & Bischoff, T., 2013, newcast Forum Proceedings. p. 57-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Local fatigue assessment of welded and high frequency mechanical impact treated joints

    Leitner, M., 2013, 127 p.

    Research output: Thesis › Doctoral Thesis

  31. Published

    Machbarkeitsanalyse zur Risikoabschätzung

    Hopmann, C., Gröger, T., Erler, I., Steyrl, M., Guttmann, P. & Mösenbacher, A., 2013, In: Kunststoffe. 08, p. 74-77

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Mikrostrukturelle Einflüsse auf das HCF-Ermüdungsverhalten von Al-Kokillenguss und Einbindung der Gießsimulation in die betriebsfeste Bauteilauslegung

    Redik, S., Guster, C., Ehart, R. & Schächtl, R., 2013, Potenziale für die nächste Generation von Fahrzeugantrieben. p. 199-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Novel trends in journal slide bearing technology - active use of tribochemical effects

    Offenbecher, M., Li, H., Lainé, E., Grün, F. & Pondicherry, K., 2013, Proceedings of CIMAC World Congress on Combustion Engine Technology. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Numerical simulation loop to investigate the local fatigue behaviour of welded and HFMI-treated joints: XIII-WG2-136-13

    Simunek, D., Leitner, M. & Stoschka, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  35. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    Optimization of the piston ring - cylinder liner system in gas-engines for power generation

    Schiffer, J., Krampl, H., Godor, I., Grün, F., Betz, M. & Laiminger, S., 2013, 27th CIMAC World Congress on Combustion Engine Technology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Planung, Erfassung und Auswertung von Betriebsfestigkeitsversuchen unter Berücksichtigung statistischer Methoden

    Ludwig, C., 2013, 112 p.

    Research output: Thesis › Diploma Thesis

  38. Published

    Pneumatic Impact Treatment (PIT) – Application and Quality Assurance: XIII-WG2-138-13

    Gerster, P., Schäfers, F. & Leitner, M., 2013

    Research output: Non-textual form › Web publication/site › Research

  39. Published

    Process Methodology of Parameter Finding with an Enhanced Lifetime Model Used for Thermo-Mechanical Fatigue

    Huter, P., 2013, International Conference Proceedings 2013. p. 249-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Product Development: Feasibility Analysis for Risk Assessment

    Hopmann, C., Gröger, T., Erler, I., Steyrl, M., Guttmann, P. & Mösenbacher, A., 2013, In: Kunststoffe <München> / Kunststoffe international. 08, p. 59-62

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Schadensanalyse eines Chippo Klingenhalters

    Mösenbacher, A., Leitner, M. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Schwingfestigkeitsuntersuchung der WEZ einer Schweißnaht eines hochfesten Feinkornbaustahls

    Maier, B. & Ottersböck, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Schwingfestigkeit von ferritischem Gusseisen mit Kugelgraphit: Größeneffekte unter dem Einfluss von Defekten

    Kainzinger, P., 2013, 244 p.

    Research output: Thesis › Doctoral Thesis

  44. Published

    Simulating the Fatigue Life of Fiber-Reinforced Injection Moldings

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 92-94

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Simulation der Lebensdauer faserverstärkter Spritzgussteile

    Guster, C., Friesenbichler, W., Gröger, T., Mösenbacher, A. & Brunbauer, J., 2013, In: Kunststoffe. p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation der Schlagverfestigung von gekerbten Rundproben mittels Nadelhammer

    Lettner, A., 2013

    Research output: Thesis › Diploma Thesis

  47. Published

    Strain Localization under Fatigue Loading

    Reiser, J., 2013

    Research output: Thesis › Doctoral Thesis

  48. Published

    Structural analysis of a drill bit including result interpretation for cyclic loading

    Maderbacher, H., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Studie des transienten Verfestigungsverhaltens für ein- und mehrlagige Verbindungen

    Stoschka, M., Ottersböck, M. & Leitner, M., 2013, Proceedings of the Simulation Forum FWS 2013. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Study of kinematic strain hardening law in transient welding simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena : [... papers presented at the 10th International Seminar "Numerical Analysis of Weldability", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria ; ... the meeting was organized by the Institute for Materials Science and Welding (IWS) of Graz University of Technology ...] . Vol. 10. p. 255-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Study of Kinematic Strain Hardening Law in Transient Welding Simulation

    Ottersböck, M., Stoschka, M. & Thaler, M., 2013, Mathematical Modelling of Weld Phenomena 10. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...11 12 13 14 15 16 17 18 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401