Chair of Mechanical Engineering (140)

Organisational unit: Chair

651 - 700 out of 1,376Page size: 50

Research output

  1. 2014
  2. Published

    Jahresendbericht_2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Lebensdauerberechnung an einer Tragschiene aus kurzfaserverstärktem Polyamid

    Mösenbacher, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Leichtbau durch Ausschöpfung des vollen Werkstoffpotentials

    Kainzinger, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, In: Gießerei-Rundschau. 61, p. 347-352

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, Gießen als Innovatsionsträger bei der Bauteilentwicklung: Material- und Energieeffizienz. p. 27-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Local Fatigue Assessment of Welded and High Frequency Mechanical Impact-Treated Joints based on Manufacturing Process Simulation

    Leitner, M., Simunek, D. & Stoschka, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Methodology for Design and Evaluation of highly loaded Hertzian Contacts

    Grün, F., Krampl, H., Godor, I. & Trausmuth, A., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Mikrostrukturelle Einflüsse auf das HCF-Ermüdungsverhalten von AlSi-Gusslegierungen

    Redik, S., 2014

    Research output: Thesis › Doctoral Thesis

  11. Published

    Modellentwicklungen zur betriebsfesten Auslegung von Strukturbauteilen aus glasfaserverstärkten Thermoplasten im Motorraum

    Mösenbacher, A., 2014

    Research output: Thesis › Doctoral Thesis

  12. Published

    Modelling and Validation of Fatigue Life Calculation Method for Short Fibre Reinforced Injection Moulded Parts

    Mösenbacher, A., Pichler, P., Guster, C., Pinter, G. & Maier, J., 2014, Proceedings of 16th Conference on Composite Materials. Sevilla

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Modelling of thin film buckling in compound specimens under uniaxial stretching

    Toth, F., Rammerstorfer, F. G., Cordill, M. J. & Fischer, F. D., 2014, Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference. p. 247-250 4 p. (Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Numerical and experimental investigation of non-conformal lubricated contacts

    Moder, J., Krampl, H. & Grün, F., 2014.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    Optimierung des tribologischen Systems Kolbenring-Zylinderlaufbahn von stationären Groß-Gasmotoren

    Schiffer, J., 2014, 155 p.

    Research output: Thesis › Doctoral Thesis

  16. Published

    Optimierung tribologischer Testmethoden für die Dichtungstechnik

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 17-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    P014-14-01 Endbericht Projektjahr 2

    Maier, B., Koch, M. & Apfelknab, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    P014-14-02 Zwischenbericht

    Christiner, T., Wohlfahrt, M. & Maier, B., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Quartalsreviewbericht_Q1-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Quartalsreviewbericht_Q2-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Quartalsreviewbericht_Q3-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Quartalsreviewbericht_Q4-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Schweißnahtbewertung auf Basis von Volumsmodellen

    Otto, M., 2014

    Research output: Thesis › Diploma Thesis

  24. Published

    Stellungnahme zur Schadensanalyse "Belag auf beständigem Material"

    Maier, B. & Godor, I., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Studying interaction between mineral particles by atomic force spectroscopy

    Klima, S., Mirkowska, M., Kratzer, M., Flachberger, H., Teichert, C. & Pondicherry, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Support of the Implementation Process of Constitutive Laws for TMF (rate dependent) with the ANSYS package

    Huter, P., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    TMF and LCF Material and Damage Characterisation of brass, bronze, grey and ductile cast iron

    Huter, P., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Tribological analysis of lubricated non-conforming contacts

    Moder, J., Krampl, H. & Grün, F., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 137-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Tribological Contact Loadings of Sealing Materials

    Hausberger, A., Krampl, H., Godor, I., Grün, F. & Schwarz, T., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Tribological investigations of journal bearings by means of a close to component test methodology

    Bergmann, P., Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Tribologie in Industrie und Forschung. Werkstoffe, Konstruktion und Technologie. Vortragsunterlagen. p. 113-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Gódor, I. & Papadimitriou, I., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2155-2158 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Tribometric performance of polymer overlays by contrast with other bearing materials

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Symposium 2014 - Tribologie in Industrie und Forschung. p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Untersuchung der Auswirkung unterschiedlicher Aufpressmittel auf eine Pressverbindung

    Maier, B., Christiner, T. & Wohlfahrt, M., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Untersuchung des Vorspannkraftverlusts dynamisch beanspruchter selbstfurchender Schrauben

    Kainzinger, P., Garb, C. & Godor, I., 2014, VDI Berichte 2239. p. 95-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Verschleiß von Eisengranulat in einem Fließbett

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    „Von der Probe zum Bauteil“: Systematische Untersuchung des Betriebsfestigkeitsverhaltens kurzfaserverstärkter Kunststoffe

    Primetzhofer, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. 2013
  38. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Layered Ceramics

    Bermejo, R. & Deluca, M., 1 May 2013, Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties: Second Edition. Amsterdam: Elsevier, p. 733-751 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  40. Published

    Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contacts

    Pondicherry, K. S., Grün, F., Gódor, I., Bertram, R. & Offenbecher, M., Apr 2013, In: Lubrication science. 25, 3, p. 231-247 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Anforderungen an den Leichtbau im Fahrzeug

    Eichlseder, W., 2013, Leichtbau in der Fahrzeugtechnik. p. 119-175

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  42. Published

    Anwendung des lokalen Spannungskonzeptes zur Lebensdauerberechnung von kurzglasfaserverstärkten Spritzgusskomponenten

    Pichler, P., 2013

    Research output: Thesis › Diploma Thesis

  43. Published

    Applicability of Ring-on-Disc and Pin-on-Plate Test Methods for Cu-Steel and Al-Steel Systems for Lare Area Conformal Contacts

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2013, In: Lubrication science. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Assessment of HFMI post-treated joints by the notch stress approach

    Leitner, M., Stoschka, M. & Eichlseder, W., 2013, Proceedings of the 13th International SF2M Spring Meeting. p. 90-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Bauteilnahe Testmethodik für Grenzreibungszustände von Gleitlagerungen

    Bergmann, P., 2013, 110 p.

    Research output: Thesis › Diploma Thesis

  46. Published

    Bauteilprüfungen der Verbindung Kupplungskorn und Zahnrad

    Wohlfahrt, M. & Winter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Beiträge zur Bewertung der Schwingfestigkeit von ausferritischem Gusseisen mit Kugelgraphit

    Wohlfahrt, M., 2013

    Research output: Thesis › Doctoral Thesis

  48. Published

    BERECHNUNGSANSATZ FÜR REIBDAUERERMÜDUNG

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: Automobiltechnische Zeitschrift : ATZ . 115, 12, p. 1000-1006

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Bewertung der Betriebsfestigkeit von Unterpulverschweißnähten basierend auf einer Schweißstruktursimulation

    Ottersböck, M., 2013, 118 p.

    Research output: Thesis › Diploma Thesis

  50. Published

    Bewertung des Einflusses von Defekten auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Guster, C., Severing, M. & Ballmes, H., 2013, DVM-Bericht 140. p. 209-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Bruchmechanische Charakterisierung der Wärmeeinflusszone einer Schweißnaht eines niederfesten Feinkornbaustahls

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Bruchmechanische Charakterisierung der WEZ einer Schweißnaht eines hochfesten Feinkornbaustahls

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...10 11 12 13 14 15 16 17 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401