Chair of Mechanical Engineering (140)

Organisational unit: Chair

51 - 100 out of 1,376Page size: 50

Research output

  1. 2023
  2. Published

    The Interaction of Two Amorphous Carbon Coatings (ta-C and a-C) on Polymer Substrates and the Consequences of the Tribological Contact Situation

    Stiller, T., Tervakangas, S., Manning, N., Jarry, O., Slapnik, J., Cerne, B., Grun, F. & Hausberger, A., 30 Sept 2023, Proceedings of 9th International Tribology Conference, ITC Fukuoka 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    On the condition monitoring of rolling element bearings in rotating electrical machines

    Kraffczyk, F., Floh, F., Renhart, P. & Grun, F., 29 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Thermomechanische Ermüdung von warmfesten Stählen

    Winter, G. & Grun, F., 20 Sept 2023.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Low-Cycle Fatigue Behavior of Wire and Arc Additively Manufactured Ti-6Al-4V Material

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 5 Sept 2023, In: Materials. 16.2023, 18, 21 p., 6083.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Experimental and numerical investigation of the deep rolling process focussing on 34CrNiMo6 railway axles

    Pertoll, T., Buzzi, C., Dutzler, A., Leitner, M., Seisenbacher, B., Winter, G. & Boronkai, L., 24 Jul 2023, In: International journal of material forming. 16.2023, 5, 22 p., 51.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Effect of Surface Finishing State on Fatigue Strength of Cast Aluminium and Steel Alloys

    Oberreiter, M., Horvath, M., Stoschka, M. & Fladischer, S., 30 Jun 2023, In: Materials. 16.2023, 13, 41 p., 4755.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

    Bahmanabadi, H., Azadi, M., Dadashi, A., Torkian, J., Parast, M. S. A., Winter, G. & Grün, F., 22 Jun 2023, In: Frattura ed Integrita Strutturale. 17.2023, 65, p. 224-245 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulations

    Trost, C. O. W., Žák, S., Ruderes, K., Hammer, R., Rosc, J., Krivec, T., Schell, N., Gänser, H.-P., Hohenwarter, A. & Cordill, M. J., 15 Jun 2023, In: Composites Part B: Engineering. 259.2023, 15 June, 110715.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influence of corrosion fatigue on the fatigue strength of an AlSi10MgMn high-pressure die-casting alloy with regard to the surface condition

    Schönowitz, M., Maier, B., Grün, F. & Bauer-Troßmann, K., 25 May 2023, In: Materials and Corrosion. 74.2023, 9, p. 1382-1389 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Experimental visualization of the wear and scuffing evolution of a flake graphite cast iron cylinder liner

    Gussmagg, J., Pusterhofer, M., Summer, F. & Grun, F., 3 May 2023, (E-pub ahead of print) In: Wear. 526-527.2023, 15 August, 12 p., 204948.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    A Numerically Efficient Method to Assess the Elastic–Plastic Strain Energy Density of Notched and Imperfective Cast Steel Components

    Horvath, M., Oberreiter, M. & Stoschka, M., 27 Apr 2023, In: Applied mechanics : open access journal. 4.2023, 2, p. 528-566 39 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Multiscale Wear Simulation in Textured, Lubricated Contacts

    Maier, M., Pusterhofer, M. & Grün, F., 29 Mar 2023, In: Coatings. 13.2023, 4, 15 p., 697.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Preparation of Micro-Electrolytic Iron-Carbon Filler for Sewage by Recycling Metallurgical Dust

    Xu, R., Zhang, Y., Huang, X., Cao, M., Yu, J., Zhang, J., Zheng, H. & Schenk, J., 29 Mar 2023, In: Metals. 13.2023, 4, 16 p., 673.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    On the Wear Behaviour of Bush Drive Chains: Part II—Performance Screening of Pin Materials and Lubricant Effects

    Summer, F., Bergmann, P. & Grün, F., 25 Mar 2023, In: Lubricants. 11.2023, 4, 24 p., 157.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Energy-Based Fatigue Assessment of Defect-Afflicted Cast Steel Components by Means of a Linear-Elastic Approach

    Horvath, M., Oberreiter, M. & Stoschka, M., 15 Mar 2023, In: Applied Sciences : open access journal. 13.2023, 6, 23 p., 3768.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4 V parts

    Springer, S., Seisenbacher, B., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 11 Mar 2023, In: Welding in the world. 67.2023, April, p. 997-1007 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Wear simulation in lubricated contacts considering wear-dependent surface topography changes

    Maier, M., Pusterhofer, M. & Grün, F., 18 Feb 2023, (E-pub ahead of print) In: Materials Today: Proceedings. 93.2023, 4, p. 563-570 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    On the Wear Behavior of Bush Drive Chains: Part I—Characterization of Engine Damage Processes and Development of a Model Test Setup for Pin Wear

    Summer, F., Bergmann, P. & Grün, F., 16 Feb 2023, In: Lubricants. 11.2023, 2, 20 p., 85.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Study of Local Fatigue Methods (TCD, N-SIF, and ESED) on Notches and Defects Related to Numerical Efficiency

    Stoschka, M., Horvath, M., Fladischer, S. & Oberreiter, M., 9 Feb 2023, In: Applied Sciences (Switzerland). 13.2023, 4, 41 p., 2247.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Prediction of Friction Power via Machine Learning of Acoustic Emissions from a Ring-on-Disc Rotary Tribometer

    Strablegg, C., Summer, F., Renhart, P. & Grün, F., 19 Jan 2023, In: Lubricants. 11.2023, 2, 17 p., 37.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Modeling of Fatigue Crack Growth: Dislocation Models

    Pippan, R. & Hohenwarter, A., 1 Jan 2023, Comprehensive Structural Integrity. Elsevier, p. V4-56-V4-70

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Effect of local microstructure on fatigue and related failure mechanisms in AlSi-castings

    Oberreiter, M., Stoschka, M., Horvath, M. & Fladischer, S., Jan 2023.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Total Knee Arthroplasty Violates the Law of Burmester—A Biomechanical Investigation

    Maderbacher, G., Keshmiri, A., Springorum, H. R., Mösenbacher, A., Grifka, J. & Baier, C., Jan 2023, In: Journal of Personalized Medicine. 13.2023, 1, 9 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Additive Fertigung - Designkriterien und Anwendungen

    Grun, F. & Tittler, M., 2023, Kfz-Symposium 2023: Neue Technologien und Innovationen in der Fahrzeugtechnik XVIII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    A method to reduce computation time in finite element simulations of deep rolling

    Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  27. Published

    Aufbau einer Pin/Disc-Modellprüftechnik zur Untersuchung von geschmierten Hochfriktionskontakten

    Hueber, G., 2023

    Research output: Thesis › Master's Thesis

  28. Published

    Bruchmechanische Betrachtung korrosiver Vorschädigung an Aluminium-Proben

    Oberreiter, P., 2023

    Research output: Thesis › Master's Thesis

  29. Published

    Different Approaches to Trace the Source of Non-Metallic Inclusions in Steel

    Thiele, K., Ilie, S., Rössler, R., Walkner, C., Meisel, T. C., Prohaska, T. & Michelic, S. K., 2023, AISTech 2023 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, AISTECH, p. 1115-1121 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2023-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Estimation of the area and depth of buried heat sources: an approach to characterize defects in inductive and ultrasound excited thermography

    Mendioroz, A., Salazar, A., Oswald-Tranta, B. & Tuschl, C., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360M. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Fatigue life assessment of imperfective cast steel components in the medium-cycle regime by stress- and energy-based concepts

    Horvath, M., Oberreiter, M. & Stoschka, M., 2023, In: Procedia Structural Integrity. 51, p. 95-101 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  32. Published

    How tight are top seals? Insights from a comprehensive characterization workflow

    Shi, X., Misch, D., Cordill, M., Zak, S., Siedl, W., Sachsenhofer, R. & Kiener, D., 2023, 84th EAGE Annual Conference and Exhibition. p. 232-236 5 p. (84th EAGE Annual Conference and Exhibition; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Hydrogen, a Promising Carbon Substitute in Metallurgy?

    Antrekowitsch, J., Wibner, S. & Hanke, G., 2023, Advances in Pyrometallurgy - Developing Low Carbon Pathways. Fleuriault, C., Steenkamp, J. D., Gregurek, D., White, J. F., Reynolds, Q. G., Mackey, P. J. & Hockaday, S. A. C. (eds.). p. 27-34 8 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Implementation of a material model under consideration of ageing in a commercial FEA software

    Mohammad Aghaei, M., 2023

    Research output: Thesis › Master's Thesis

  35. Published

    Improved nanoindentation methods for polymer based multilayer film cross-sections

    Christoefl, P., Jakes, J. E., Geier, J., Pinter, G., Oreski, G., Stone, D. & Teichert, C., 2023, 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023. Institute of Electrical and Electronics Engineers, (2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Industry-oriented sample preparation with an inductively heated laboratory continuous casting plant for aluminum alloys

    Weidinger, A., Samberger, S., Schmid, F., Stemper, L. & Pogatscher, S., 2023, Proceedings - European Metallurgical Conference, EMC 2023. p. 435-445 11 p. (Proceedings - European Metallurgical Conference, EMC 2023; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    In-Situ HT-EBSD Measurements and Calibration of Multi-class Model for Grain Growth and δ-phase Dissolution Kinetics of Alloy 718

    Raninger, P., Gruber, C., Costin, W., Stanojevic, A., Kozeschnik, E. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 93-106 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Lastverteilungsabhängige Verzahnungsverluste von korrigierten und unkorrigierten Gerad- und Schrägverzahnungen

    Gasplmayr, W., 2023

    Research output: Thesis › Master's Thesis

  39. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Machbarkeitsstudie zur experimentellen Verschleißbewertung von Komponenten einer Warmwalzstraße

    Weinzettl, C., 2023

    Research output: Thesis › Master's Thesis

  41. Published

    On the road towards understanding squats: residual stress state of rails

    Gschwandl, T. J., Daves, W., Antretter, T., Bucher, C. & Künstner, D., 2023, In: Procedia Structural Integrity. 46, p. 17-23 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  42. Published

    Petroleum Systems in the North Alpine Foreland Basin

    Sachsenhofer, R. F., Ajuaba, S., David, P., Garlichs, T. U., Gross, D., Misch, D., Moscariello, A., Omodeo-Salé, S. & Pytlak, L., 2023, 84th EAGE Annual Conference and Exhibition. p. 2269-2273 5 p. (84th EAGE Annual Conference and Exhibition; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Porosity evolution and implications of hydrocarbon expulsion behavior from artificial maturation of Qingshankou Shale

    Yan, Y., Misch, D., Wang, M., Shi, X., Sachsenhofer, R. & Zhang, Y., 2023, 84th EAGE Annual Conference and Exhibition. p. 2254-2258 5 p. (84th EAGE Annual Conference and Exhibition; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Prüfung und Bewertung der Schwingfestigkeit von dünnwandigen Strukturen bei sehr hohen Schwingspielzahlen

    Himmelbauer, F., 2023

    Research output: Thesis › Doctoral Thesis

  45. Published

    Scanning inductive thermography using a µ-bolometer and a visual camera

    Tuschl, C., Agathocleous, T., Oswald-Tranta, B. & Eck, S., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    SEARCH FOR THE SOURCE ROCKS IN THE TURIJA OIL FIELD REGION (SE PANNONIAN BASIN, SERBIA)

    Stevanović, J., Vuković, N., Gross, D., Sachsenhofer, R. F., Kostić, A., Kojić, I. & Stojanović, K., 2023, 31st International Meeting on Organic Geochemistry, IMOG 2023. (31st International Meeting on Organic Geochemistry, IMOG 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    THE PRESERVATION OF CELLULOSE IN FOSSIL WOOD – IMPLICATIONS FROM ORGANIC GEOCHEMICAL STUDY OF FOSSIL AND MODERN WOOD

    Kus, J., Dolezych, M., Schneider, W., Hower, J. C., Hofmann, T., Rajczi, E. V., Sachsenhofer, R. F., Bechtel, A., Stojanović, K., Životić, D., Kojić, I., Mastalerz, M., Graupner, T., Lukens, W. E. & Donaldson, L., 2023, 31st International Meeting on Organic Geochemistry, IMOG 2023. (31st International Meeting on Organic Geochemistry, IMOG 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. 2022
  49. Published

    Influence of T6 heat-treating and over-ageing on out-of-phase thermo-mechanical fatigue behaviors of Al-Si-Cu alloy

    Khisheh, S., Azadi, M., Hendoabadi, V. Z., Parast, M. S. A., Winter, G., Seisenbacher, B., Grün, F. & Khalili, K., Dec 2022, In: Materials Today Communications. 33.2022, December, 12 p., 104803.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Modelling Approaches of Wear-Based Surface Development and Their Experimental Validation

    Maier, M., Pusterhofer, M. & Grün, F., 26 Nov 2022, In: Lubricants. 10.2022, 12, 21 p., 335.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Very high cycle fatigue assessment at elevated temperature of 100 µm thin structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Seisenbacher, B., Grün, F. & Kiesling, C., 12 Oct 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 1811-1829 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Fatigue strength study based on geometric shape of bulk defects in cast steel

    Horvath, M., Stoschka, M. & Fladischer, S., Oct 2022, In: International Journal of Fatigue. 163.2022, October, 9 p., 107082.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401