Chair of Mechanical Engineering (140)

Organisational unit: Chair

Research output

  1. Published

    Effect of elevated temperature on the fatigue strength of casted AlSi8Cu3 aluminium alloys

    Garb, C., Leitner, M. & Grun, F., 12 Dec 2017, In: Procedia structural integrity / ESIS. 7.2017, p. 497-504 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  2. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  3. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 311-314

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Published

    Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

    Hofer, A. K., Rabitsch, J., Jutrzenka-Trzebiatowska, D., Hofstetter, C., Gavalda-Velasco, I., Schlacher, J., Schwentenwein, M. & Bermejo, R., 1 Jan 2022, In: International journal of applied ceramic technology. 19, 1, p. 174-180 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Effect of as-cast surface layer on aluminium alloy fatigue strength

    Pomberger, S., Leitner, M. & Stoschka, M., 25 Sept 2018, 35th Danubia-Adria Symposium on Advances in Experimental Mechanics. Sinaia, Romania, p. 73-74

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety. p. 1022-1028 7 p. (28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published

    Dynamic Mechanical Response in Epoxy Nanocomposites Incorporating Various Nano-Silica Architectures

    Chaudhary, S., Vryonis, O., Vaughan, A. S., Andritsch, T. & Feuchter, M., 2022, ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings. Institute of Electrical and Electronics Engineers, p. 86-89 4 p. (ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Published

    Durchgängige Simulationskette von der Konstruktion bis zur Spannungsbewertung

    Mösenbacher, A., Lucyshyn, T., Pußwald, S. & Primetzhofer, A., 15 Mar 2016, p. 1. 28 p.

    Research output: Contribution to conferencePresentationResearch

  9. Published

    Durablity prediction of jointed automotive components based on finite element structures

    Unger, B., Eichlseder, W. & Dannbauer, H., 2005, Durablity prediction of jointed automotive components based on finite element structures. p. 476-486

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Published

    Ductile failure modelling in pre-cracked solids using coupled fracture locus theory

    Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.

    Research output: Contribution to journalArticleResearchpeer-review