Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

501 - 600 out of 1,629Page size: 100

Research output

  1. 2017
  2. Published

    Tribologische Kontaktsimulation elastomerer Dichtungswerkstoffe

    Hausberger, A., Krampl, H., Grün, F., Gódor, I., Pinter, G. G. & Schwarz, T., 2017, In: Tribologie und Schmierungstechnik. 64.2017, 1, p. 15-24 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Untersuchung der lokalen Reibungsmechanismen von Polymer-Glas kontakten mittels in-situ Tribologie

    Stiller, T., Hausberger, A., Wang, C., Pinter, G. G., Gódor, I., Grun, F. & Schwarz, T., 2017, ÖTG 2017 Tagungsband. 2017, p. 55 68 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Verification of the Hydrolysis Resistance of Polyester Based Backsheets on the Market

    Ottersböck, B., Oreski, G., Kühne, M. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Verification of the Hydrolysis Resistance of Polyester Based Backsheets on the Market

    Ottersböck, B., Oreski, G., Kühne, M. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  6. Published

    WPR-V-3.02-07_TorsionUndMultiaxialeBelastung

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  7. Published

    WPR-V-3.02-08_LCF-Versuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  8. Published

    WPR-V-3.02-10_Lebensdauerberechnung am Bauteil und Validierung durch Bauteilversuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  9. Published

    WPR-V-3.02-11_Optimierung Simulationskette

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  10. Published

    WPR-V-3.02-12_Materialgenerator

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  11. Published

    WPR-V-3.05-02_Entwicklung_Prüfstrategie_Probendefinition_und_Referenzversuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  12. Published

    WPR-V-3.05-03_Stuetzwirkungsverhalten_in_Kombination_mit_Temperatur

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  13. Published

    WPR-V-3.05-04_Orientierungseinfluss und Bindenaht

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  14. Published

    WPR-V-3.05-05_Einfluss_Umgebungstemperatur_und_Medium

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  15. Published

    WPR-V-3.05-06_Gassnerlinien_variableAmplituden

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  16. 2016
  17. Published

    Cranial Polypropylene Implants by Fused Filament Fabrication

    Katschnig, M., Arbeiter, F., Haar, B., von Campe, G. & Holzer, C., 2 Dec 2016, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600676.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G. & Guttmann, P., 31 Oct 2016, AIP Conference Proceedings: Proceedings of the Regional Conference Graz 2015 – Polymer Processing Society PPS. Vol. 1779. p. 070008-1–070008-5 6 p. 070008-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 12 Oct 2016.

    Research output: Contribution to conference › Paper

  20. Published

    Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 12 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials

    Arbeiter, F., Frank, A. & Pinter, G. G., 10 Oct 2016, In: Journal of Applied Polymer Science. 133.2016, 38, 16 p., 43948.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Kriecheigenschaften von verstärkten und unverstärkten Kunststoffen unter Medieneinfluss

    Gloggnitzer, S., 10 Oct 2016.

    Research output: Contribution to conference › Abstract

  23. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  24. Published

    Fast comparison of different polymeric pipe materials: Extending the use of the cyclic CRB-Test (ISO 18489)

    Arbeiter, F., 14 Sept 2016. 1 p.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Lifetime Prediction of PE100 and PE100 RC Pipes based on Slow Crack Growth Resistance

    Frank, A., Berger, I. J., Hutař, P., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    POLYPROPYLENE MULTI-LAYER-PIPES - 100 YEAR LIFETIME ASSESSMENT USING LINEAR ELASTIC FRACTURE MECHANICS

    Pappler, U., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference . Plastics Pipes Conference Association, Vol. 18. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Concepts for service lifetime prediction of composite materials at different environmental conditions

    Gloggnitzer, S. & Pilz, G., 11 Sept 2016.

    Research output: Contribution to conference › Abstract

  28. Published

    Reibung und Verschleiß technischer Kunststoffe "Möglichkeiten und Herausforderungen"

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 1 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    FAST COMPARISON OF DIFFERENT POLYMERIC PIPE MATERIALS: EXTENDING THE USE OF THE CYCLIC CRBTEST (ISO 18489)

    Arbeiter, F., Pinter, G. & Frank, A., Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 10 p. 118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. E-pub ahead of print

    Fracture toughness of high density polyethylene: Fatigue pre-cracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodríguez, J., Arbeiter, F., Pinter, G. G. & Martínez, A. B., 13 Jul 2016, (E-pub ahead of print) In: Engineering Fracture Mechanics. 149.2015, November, p. 199-213 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Dynamic mechanical response of polyetheretherketone (PEEK) exposed to cyclic loads in the high stress tensile regime

    Berer, M., Tscharnuter, D. & Pinter, G., 3 Jul 2016, (E-pub ahead of print) In: International Journal of Fatigue. 80.2015, October, p. 397-405 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Fatigue Strength of a Multiaxial Loaded Short Glass Fibre Reinforced Polyamide

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 30 Jun 2016. 8 p.

    Research output: Contribution to conference › Paper

  33. Published

    Review on the suitability of stiffness and strength based concepts for the fatigue-life prediction of composites

    Maier, J., Pinter, G. & Schuecker, C., 30 Jun 2016.

    Research output: Contribution to conference › Abstract › peer-review

  34. Published

    SUITABILITY OF STIFFNESS AND STRENGTH BASED CONCEPTS FOR THE FATIGUE-LIFE PREDICTION OF COMPOSITES

    Pinter, G., Maier, J., Wolfahrt, M. & Schuecker, C., 30 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    SUITABILITY OF STIFFNESS AND STRENGTH BASED CONCEPTS FOR THE FATIGUE-LIFE PREDICTION OF COMPOSITES

    Pinter, G., Maier, J., Wolfahrt, M. & Schuecker, C., 30 Jun 2016, Proceedings of the 17th European Conference on Composite Materials. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Damage evolution in glass fibre reinforced composites

    Stelzer, S., Rieser, R. & Pinter, G., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Fatigue Strenght of a Multiaxial Loaded Short Glass Fibre Reinforced Polyamide

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Damage evolution in glass fibre reinforced composites

    Stelzer, S., Rieser, R. & Pinter, G., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Methods for the service lifetime prediction of composite materials under static load

    Gloggnitzer, S. & Guttmann, P., 26 Jun 2016.

    Research output: Contribution to conference › Paper

  40. Published

    Green Composites: Challenges to reach high performance components

    Lloret Pertegas, S., Anusic, A., Resch-Fauster, K. & Schledjewski, R., Jun 2016.

    Research output: Contribution to conference › Paper

  41. Published

    Multi-layer sewer pipes: long-term performance and influence of artificial ageing

    Arbeiter, F., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Neuartige Elastomerwerkstoffe auf Basis von Nanocompositen

    Ziegler, W., Rieß, G. (Co-editor), Winter, J. (Co-editor), Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt: Schriftenreihe Kunststofftechnik Leoben. Pinter, G. & Pilz, G. (eds.). Leoben, Vol. 6. p. 209-210 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Photopolymerisierbare Monomere für den 3D Druck von biokompatiblen Strukturen

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Edler, M., Pinter, G. & Grießer, T., Apr 2016, Schriftenreihe Kunststofftechnik Leoben: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Vol. 6. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: Data analysis and design considerations

    Brunner, A. J., Stelzer, S., Pinter, G. G. & Terrasi, G. P., Feb 2016, In: International Journal of Fatigue. 83.2016, Part 2, February, p. 293-299 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    25. Leobener Kunststoff Kolloquium "Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt"

    Pinter, G., Pilz, G. & Payer, M., 2016, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  46. Published

    Accelerated Aging of Polyolefin Pipe Materials in Chlorinated Water

    Bredacs, M., Redhead, A., Frank, A. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  47. Published

    An Adaptable Semi-Numerical Hyperelastic Model for the Simulation of High-Pressure Forming

    Tscharnuter, D., Truskiewics, E. & Pinter, G., 2016, Proceedings ICCM 2016 International Conference on Computational Mechanics. p. 1114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    A nonlinear viscoelastic constitutive model for polymeric solids based on multiple natural configuration theory

    Muliana, A., Rajagopal, K. R., Tscharnuter, D. & Pinter, G., 2016, In: International journal of solids and structures. 100-101, p. 95 110 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Charakterisierung eines im RTM-Prozess hergestellten CFK-Metall-Leichtbauwerkstoffes

    Brandstetter, D., 2016

    Research output: Thesis › Master's Thesis

  50. Published

    Concept of fatigue design methodology for short fibre reinforced polymers considering environmental conditions

    Primetzhofer, A., Mösenbacher, A., Pinter, G. & Haslinger, T., 2016, In: AIP Conference Proceedings. 1779, 050012.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Correlation of epoxy material properties with the toughening effect of fullerene-like WS2 nanoparticles

    Haba, D., Brunner, A., Barbezat, M., Spetter, D., Tremel, W. & Pinter, G., 2016, In: European polymer journal. 84, p. 125 136 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Correlation study of damp heat and pressure cooker testing on backsheets

    Ottersböck, B., Oreski, G. & Pinter, G., 2016, In: Journal of Applied Polymer Science. 133, 47, 44230.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Damage mechanics of composites under fatigue loads

    Rieser, R., 2016

    Research output: Thesis › Master's Thesis

  54. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Radl, S. V., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Oesterreicher, A., Radl, S. V., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Polymer. 102.2016, October, p. 10-20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Design and development of a testing machine for compressive creep tests on polymers at elevated temperatures

    Brunbauer, S., 2016

    Research output: Thesis › Master's Thesis

  58. Published

    Development and implementation of an accelerated method for chlorine dioxide exposure

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, In: AIP Conference Proceedings. 1779, 070009.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  60. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016, Proceedings ECCM 17. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Herstellung und Charakterisierung von Verbundwerkstoffen aus thermoplastischen Biopolymeren und pflanzlichen Kurzfasern

    Gerstbauer, F., 2016

    Research output: Thesis › Master's Thesis

  64. Published

    High temperature phase change materials for the overheating protection if facade integrated solar thermal collectors, Energy and Buildings

    Hengstberger, F., Zauner, C., Resch-Fauster, K., Holper, S. & Grobbauer, M., 2016, In: Energy and Buildings. 124

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Impact of the acrylonitrile content on the mechanical performance of elastomeric materials

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Rubber, fibres, plastics international. p. 40 - 47

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Implementation of a New Chlorine Dioxide Device for Accelerated Aging of Polyolefin Pipe Materials

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016, Proceedings PVSEC.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  69. Published

    Influence of cyclic stress intensity threshold on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

    Mujtaba, A., Stelzer, S., Brunner, A. & Jones, R., 2016, In: Composite structures.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Influence of the Processing conditions on morphology and fracture mechanical properties of unfilled polyoxymethylene (POM)

    Halb, M., 2016

    Research output: Thesis › Master's Thesis

  71. Published

    Influence of thermo-oxidative ageing of HNBR in oil field applications

    Balasooriya, W., Schrittesser, B., Ayalur-Karunakaran, S., Schlögl, S., Pinter, G., Schwarz, T. & Kadar, Z., 2016.

    Research output: Contribution to conference › Poster › Research

  72. Published

    Mechanical Properties of Composites Used in High-Voltage Applications

    Moser, A. & Feuchter, M., 2016, In: Polymers / Molecular Diversity Preservation International.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Modified Hartman-Schijve fitting of mode I delamination fatigue data and the resulting variation in threshold values Gthr

    Brunner, A., Mujtaba, A., Stelzer, S. & Jones, R., 2016, Procedia Structural Integrity. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  74. Published

    Natural and artifical ageing on backsheets - Comparison of degradation effects

    Ottersböck, B., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Polybutylensuccinat als potentieller Substitutionswerkstoff für Polypropylen und Polybuten

    Klutz, A., 2016

    Research output: Thesis › Master's Thesis

  77. Published

    Rapid Gas Decompression Performance of elastomers - A study of influencing testing parameters

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Procedia Structural Integrity. 2, p. 1746-1754 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Residual stress distribution in extruded polyolefin pipes

    Hutař, P., Poduska, J., Kučera, J., Nezbedová, E., Frank, A., Sadilek, J. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Residual stress in polyethylene pipes

    Poduska, J., Hutař, P., Kučera, J., Frank, A., Sadilek, J., Pinter, G. & Náhlík, L., 2016, In: Polymer Testing. 54, p. 288 295 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Significance of epoxy network properties for the toughening effect of flaky and fullerene-like WS2 nanoparticles

    Haba, D., Barbezat, M., Ayalur-Karunakaran, S., Schlögl, S., Brunner, A. & Pinter, G., 2016, In: Journal of polymer science : B, Polymer physics. 54, 17, p. 1738 1747 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Strength and damage tolerance of composite–composite joints with steel and titanium through the thickness reinforcements

    Stelzer, S., Ucsnik, S. & Pinter, G., 2016, In: Composites Part A: Applied Science and Manufacturing. 88, p. 39–47

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    The effect of residual stress on the process of crack growth rate determination in polymer pipes

    Poduska, J., Hutař, P., Kucera, J., Sadilek, J., Frank, A., Pinter, G. & Náhlík, L., 2016, Solid State Phenomena . 258 ed. p. 174 177 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  83. Published

    Thiol‐Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

    Sahin, M., Ayalur Karunakaran, S., Manhart, J. C., Wolfahrt, M., Kern, W. & Schlögl, S., 2016, In: Advanced engineering materials. 2016, 19, 19.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Thiol-Yne Derived Photopolymers from Low-Cytotoxic 3D-Printing Resins

    Hartmann, D., Oesterreicher, A., Edler, M., Moser, A., Pinter, G. & Grießer, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  85. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Toughening of epoxy with WS2 nanoparticles

    Haba, D., 2016

    Research output: Thesis › Doctoral Thesis

  87. Published

    Untersuchung der mechanischen Rezyklierbarkeit von technischen Biokunststoffen

    Blees, E. C., 2016

    Research output: Thesis › Master's Thesis

  88. 2015
  89. Published

    On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

    Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dec 2015, In: Materials & design. 87, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Characterization of the aging behaviour of various polyamide materials - part II

    Pilz, G. & Pinter, G., 30 Oct 2015

    Research output: Book/Report › Other report › Transfer

  91. Published

    Nanocomposite Hydrogels - Fracture Toughness and Energy Dissipation Mechanisms

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 8 Oct 2015, In: Journal of polymer science : B, Polymer physics. 53, p. 1763 - 1773 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Heute schon an morgen denken

    Klein, A., Blees, E. C. & Resch, K., 7 Oct 2015, In: Recycling-Magazin. 19, p. 30 33 p.

    Research output: Contribution to journal › Article › Research

  93. Published

    The Cyclic CRB Test – A Quick Test for Assessing Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 25 Sept 2015, PPS 2015 - Book of Abstracts. p. 104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Ševčík, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 23 Sept 2015, PPS 2015 - Book of Abstracts. p. 134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    The Cyclic CRB Test - A Quick Test for Assessing the Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions

    Primetzhofer, A., Pinter, G., Mösenbacher, A. & Haslinger, T., 22 Sept 2015.

    Research output: Contribution to conference › Paper

  97. Published

    Mechanical Recycling of Technical Biopolymers - Possibilities & Limits: Mechanisches Recycling von technischen Biopolymeren - Möglichkeiten und Limits

    Klein, A., 22 Sept 2015, Proceedings of PPS 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Sevcik, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 22 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  99. Published

    Promising Biocompatible Monomers for Thiol-yne Based Photopolymers

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Samusjew, A., Edler, M., Pinter, G. & Grießer, T., 21 Sept 2015, Regional Conference Polymer Processing Society Graz 2015 - Book of Abstracts. p. 295 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    aliphatic Polyketones - Mechanical and Thermo-Mechanical Behaviour in Wet Environments

    Guttmann, P. & Pilz, G., 9 Sept 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research

  101. Published

    Evaluation of Mechanical Recyclability of Technical Biopolymers

    Klein, A., Blees, E. C. & Resch, K., 8 Sept 2015, Book of Abstracts of the 8th International Symposium on Feedstock Recycling of Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    AFM Investigation of Epoxy Fracture Surfaces Indicating Nanoplasticity

    Haba, D., Barbezat, M. & Brunner, A. J., 27 Aug 2015, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE NANOMATERIALS: APPLICATIONS AND PROPERTIES: NAP-2015. Sumy / Ukraine: Sumy State University, Vol. 4 / 1. 4 p. 01MAN01

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 7 8 9 ...17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101