Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1551 - 1600 out of 1,629Page size: 50

Research output

  1. 2005
  2. Published

    Test method development. Applicability and limitations of J integral concept to elastomer fracture

    Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Test method development. Applicability and limitations of tearing energy concept to elastomer fracture and fatigue

    Feichter, C. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Test method development based on linear elastic fracture mechanics concept

    Balika, W. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Thermoanalytische umd morphologische Untersuchungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Thermographische Verfahren zur Schadensdetektion an kohlenstofffaserverstärkten RTM-Laminaten in Ermüdungsversuchen

    Ladstätter, E., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Thermokalorimetrische Charakterisierung (DSC) von gehärteten Reinharzplatten

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Thermokalorimetrische Charakterisierung (DSC) von ungehärteten u. gehärteten Reinharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Thermomechanische Eigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Through thickness characterization of crack growth and process zone development in cyclically loaded PE-HD

    Balika, W., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Through-thickness process zone characterization at fatigue cracks in PE-HD

    Balika, W., Pinter, G. & Lang, R., 2005, ANTEC. p. 3512-3516

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Time and Cycle dependent crack growth and crack tip yielding in PE pipe materials

    Balika, W., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Trommelschälversuch an Wabenkernverbunden

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Umsatzabhängigkeit von Reinharz-Schlüsseleigenschaften

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Untersuchungen an Nutverschlusskeilen

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Untersuchungen zu thermischen Ausdehnungs-koeffizienten und zur Nachkristallisation von PP-Formulierungen

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Weathering of Commercial Greenhouse Films - Investigation of Aging Behaviour

    Oreski, G., Wallner, G., Eder, R. & Krasser-Lamik, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Werkstoffdatenblätter für Epoxidharzformulierungen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Werkstoffvorauswahl und Charakterisierung von Werkstoffen für neuartige Federkomponenten in Lautsprechern

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Werkstoffvorauswahl und Charakterisierung von Werkstoffen für neuartige Federkomponenten in Lautsprechern (Phase II: Charakterisierung von ausgewählten Werkstoffen)

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Zugeigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Zugprüfungen an GFK-Kettenelementen

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Zugprüfungen an Polyazetal (POM)-Ketten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Zugprüfungen an Polyoxymethylen (POM)-Ketten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Zugprüfungen an PP-und POM-Kettenelementen des Typs Rübig 50

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Zugversuch an einem Composite - Bauteil IP 980 flange test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Zugversuche an Proben aus stumpfgeschweißten Polyethylenrohren nach EN 12814-2

    Haager, M. J. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. 2004
  29. Published

    Estimation of slow crack growth behavior in polyethylene after stepwise isothermal crystallization

    Haager, M., Pinter, G. & Lang, R. W., Oct 2004, In: Macromolecular Symposia. 217, p. 383-390 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    A fatigue approach for lifetime prediction of PE-HD pipe grades

    Balika, W., Pinter, G., Choi, B.-H. & Lang, R., 2004, Society of Plastics Engineers. p. 4028-4032

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004: 18. Leobener Kunststoffkolloquium

    Pinter, G. (Editor) & Lang, R. (Editor), 2004, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  32. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behavior of polyethylene-pipe materials

    Haager, M., Pinter, G. & Lang, R. W., 2004, p. 4023-4027. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  33. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behaviour of polyethylene pipe materials

    Haager, M. J., Pinter, G. & Lang, R., 2004, Society of Plastics Engineers. p. 4023-4027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Applicability of linear elastic fracture mechanics to fatigue in amorphous and semi-crystalline polymers

    Lang, R., Balika, W. & Pinter, G., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  35. Published

    Beschleunigte Prüfmethoden zur Charakterisierung des Langzeitversagensverhaltens von thermoplastischen Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. VI-1-VI-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Characterisation of the fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Society of Plastics Engineers. p. 1379-1383

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Characterization of the fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R. W., 2004, p. 1379-1383. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  38. Published

    Characterizsation of Table Tennis Racket Sandwich Rubbers

    Major, Z. & Lang, R., 2004, 8th Internationale Table Tennis Federation Sports Science Congress and the 3rd Qorld Congress of Science and Racket Sports. p. 146-151

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Creep crack growth in high density polyethylene

    Pinter, G. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 49-54

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  40. Published

    Ermüdungsrisswachstum in PE-Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: 3 R international. p. 492-496

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Ermüdungsverhalten karbonfaserverstärkter RTM-Laminate

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Int. Conference, European Chapter. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Estimation of slow crack growth behavior in Polyethylen after stepwise isothermal segregation

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 383-390

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Investigation of heat dissipation of RTM laminates under tensile fatigue loading by thermography

    Leitao, T. I. V., Steinberger, R., Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Investigations of the crack tip deformation zone in polyethylene pipe materials using scanning small angle X-ra scattering (sSAXS)

    Maier, G., Pinter, G. & Fratzl, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Local deformation and failure at crack tips in thermoplastic pipe grades

    Pinter, G., Balika, W. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. IX-1-IX-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Moderne Prüfmethoden für Polyethylen-Rohrwerkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: VLK-News. p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Ranking of PE-HD pipe grades by fatigue crack growth performance

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2004, Plastics Pipes XII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Rate dependent fracture of polymers - applicability and limitation of force based fracture mechanics approaches

    Major, Z. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 39-46

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Thermo-oxidative degradation during creep crack growth of PE-HD grades as assessed by FT-IR spectroscopy

    Pinter, G., Haager, M. J., Wolf, C. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 307-316

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2003
  51. Published

    1.Leobener Symposium POLYMER SOLAR MATERIALS am 06. und 7. November 2003 im Congress Leoben

    Wallner, G., 2003, In: VLK-News. p. 11-16

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Advanced methodologies for the characterisation of the performance of long-term thermal antioxidants

    Pinter, G. & Lang, W. R., 2003, p. 124-128. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Advanced methodologies for the characterization of the performance of long-term thermal antioxidants

    Pinter, G. & Lang, R., 2003, 3. European Additives and Colors Conference. p. 124-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...28 29 30 31 32 33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101