Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1451 - 1500 out of 1,629Page size: 50

Research output

  1. 2005
  2. Published

    Brittle and ductile failure behavior of PE pipe grades

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Bruchmechanische Eigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Characterisation of the compression behavior of engineering polymers

    Jerabek, M., Steinberger, R. & Major, Z., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Characterization of the failure behavior of elastomers by fracture mechanics methods

    Major, Z., Balika, W., Feichter, C., Steinberger, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Characterization of the tensile-compression fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Charakterisierung der Auswirkungen unterschiedlicher Laminatvorbehandlung (Sandstrahlen) auf die Oberflächenqualität und den GIC-Wert von verklebten Laminaten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Charakterisierung der Topographie organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroissnigg, M., Kicker, H., Wallner, G., Gruber, D., Strauss, B. & Jandel, L., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Charakterisierung der Topographie organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroissnigg, M., Kicker, H., Wallner, G., Gruber, D., Strauss, B. & Jandel, L., 2005, Forum für Metallurgie und Werkstofftechnik. p. 2-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Charakterisierung des Ermüdungsrisswachstums in PE mit CT Proben - Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Charakterisierung des Impactverhaltens von PE-Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Charakterisierung des spröden Risswachstums in Polyethylen-Rohrwerkstoffen mit beschleunigten Prüfmethoden

    Hiesch, T. J., 2005, 63 p.

    Research output: Thesis › Diploma Thesis

  13. Published

    Charakterisierung transparenter Formstoffe für Skier

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Charpy tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Comparison of thermomechanical properties and creep behaviour of HPM001 and HPM100

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Compression tests for pipe wall specimens

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Compression tests for pipe wall specimens, contacting and non-contacting deformation measurements

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Compression Tests on a Hobas CC-GRP Pipe Material

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Curing Process Control for Neat Resins by DSC, DMA and DEA

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Deformation behavior of polyolefins under monotonic loading - development and implementation of test methods

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Delamination behaviour of multi-layer films for PV encapsulation, Solar Energy Materials and Solar Cells

    Oreski, G. & Wallner, G., 2005, In: Solar energy. 89, p. 139-151

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Determination of "True Stress vs. True Strain" Data for Thin Molybdenum Sheets

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Development and implementation of a video extensometer system

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components - Thermography

    Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Development of fatigue test methods for elastomers - Standard and complex methods

    Feichter, C., Major, Z. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Dielektrische Analyse (DEA) - Geräte und Leistungsmerkmale

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    DMA-Ringversuch

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Druckversuche an Composite-Proben - Compression strength and modulus measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Druckversuche an Flugzeugbauteil-Komponenten

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Druckversuche an Kalibrierkörpern (Flugzeugbauteil-Komponenten)

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    DSC-Messungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Dynamic mechanical analysis for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Dynamisch-mechanische Analyse (DMA) von Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials

    Balika, W., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Einfluss der Härtungsbedingungen auf Reinharz-Schlüsseleigenschaften

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften eines Epoxidharz - Matrixwerkstoffes

    Wolfahrt, M., Pilz, G. & Lang, R., 2005, 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Entwicklung von Gießformen für die Reinharzhärtung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Ermüdungsrisswachstumsversuche an CT Proben aus PE bei 10 Hz

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Fatigue behavior of RTM laminates

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2005, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fatigue crack growth in PE-HD pipe grades

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2005, In: Plastics, rubber and composites. 34, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Fatigue of Glass-Fiber Reinforced Plastics - Characterization Methods and Structure-Property-Relationsships

    Zahnt, B.-A. & Lang, R., 2005, Series on Advances in Experimental Mechanics Volume 9. p. 107-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Feuchteaufnahmeverhalten von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Fracture mechanical tests for HPM001

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Fracture mechanical tests for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Fracture surface anaylsis

    Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Guest Editoral

    Wallner, G. & Lang, R., 2005, In: Solar energy. p. 571-572

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Härtungscharakterisierung von Reinharzen mit dynamischer Differ-enzkalorimetrie (DSC)

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Impact bending tests (Charpy) for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation and experiments

    Feichter, C., Major, Z. & Lang, R., 2005, In: VLK-News. p. 6-12

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation experiments

    Feichter, C., Major, Z. & Lang, R., 2005, European Conference on Constitutive Models for Rubber IV (ECCMR 2005). Balkema, p. 89-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Instrumentierte Impactversuche an Rohren aus Polypropylen in Anlehnung an EN 744

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...26 27 28 29 30 31 32 33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101