Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1351 - 1400 out of 1,629Page size: 50

Research output

  1. 2006
  2. Published

    Characterisation of the fatigue behavior of elastomers and elastomer Composite

    Major, Z., Feichter, C., Kovacevic, Z. & Lang, R., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 265-277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Characterization of Rapid Gas Decompression Behavior of Pressurized Elastomer Seals

    Lederer, K., 2006, 113 p.

    Research output: Thesis › Diploma Thesis

  4. Published

    Characterization of the deformation and rupture behaviour of silicone elastomers for airbag applications

    Schwarz, A. J., 2006

    Research output: Thesis › Diploma Thesis

  5. Published

    Characterization of the Fatigue Behavior of Elastomer Compounds by Fracture Mechanics Methods

    Feichter, C., 2006

    Research output: Thesis › Doctoral Thesis

  6. Published

    Characterization of the Mechanical Behavior of Polyetheretherketone (PEEK)

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Characterization of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R., 2006, In: International Journal of Fatigue. p. 1277-1283

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Charakterisierung des Oberflächenerscheinungsbildes organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Gruber, D., Wallner, G., Buder-Stroisznigg, M., Strauß, B., Jandel, L. & Lang, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 205-208

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Charakterisierung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Comparison between time-independent FE-Simulation and measurements for two types of rubber

    Feichter, C., Major, Z. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 523-524

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Compression / Inplane Shear Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Control of the resin transfer moulding process using dielectric and thermal analysis

    Wolfahrt, M., Pilz, G., Lang, R. & Ladstätter, E., 2006, Latest advancements of applied composite technology: SAMPE Europe 27th international conference, March 27th - 29th, 2006, Paris EXPO, Porte de Versailles ; proceedings. p. 309-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Deformation analysis of notched rubber specimens

    Feichter, C., Major, Z. & Lang, R., 2006, In: Strain. p. 299-304

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Deformation behavior and appearance after forming of polymer coatings applied in multilayer coil-coated steel sheets - WP Report "Herstellung von beschichteten Blechen"

    Buder-Stroisznigg, M. & Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Deformation behavior and appearance after forming of polymer coatings applied in multilayer coil-coated steel sheets - WP Report "Herstellung von Lackfilmen"

    Buder-Stroisznigg, M. & Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Deformation behavior and appearance after forming of polymer coatings applied in multilayer coil-coated steel sheets - WP Report "Mechanische und thermomechanische Charakterisierung von Lackfilmen"

    Buder-Stroisznigg, M. & Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    DSC-Analyse eines vernetzten Gießharzes

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    DSC-Untersuchungen an PE-HD Bauteilen

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Dynamische-mechanische Analyse (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Dynamisch-mechanische Untersuchungen und Kriechversuche an Elastomerwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Effect of artificial defects on the fatigue behavior of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R. W., 2006, p. 133-137. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Effect of artificial defects on the fatigue behaviour of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R., 2006, ANTEC 2006. p. 133-137

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials

    Stadler, H., 2006

    Research output: Thesis › Diploma Thesis

  25. Published

    Ermüdungsverhalten von PA 66 und PBT unter Medien- und Temperatureinfluss

    Riesner, M., 2006

    Research output: Thesis › Diploma Thesis

  26. Published

    Ermüdungsversuche an Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Fatigue crack growth and process zone development in a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2006, In: Advanced engineering materials. p. 1146-1150

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Heat deflection temperature of neat resins HPM001, HPM002 and HPM054

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Impact Tensile Characterization of Polytron-GRF

    Steinberger, R. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Improvement of the Impact Properties of Centrifugally Cast Glass Fibre Reinforced Plastics Pipes

    Kucher, G., 2006

    Research output: Thesis › Diploma Thesis

  32. Published

    Influence of Annealing on the Fracture Behavior of 200 µm Thick a-PVDF Films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2006, In: Advanced engineering materials. 8, p. 1140-1145

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of the curing degree on key resin properties of high Tg epoxy resins for composites

    Wolfahrt, M., Pilz, G., Lang, R., Eugen, R., Krumlacher, W. & Plessing, A. K., 2006, proceedings: SAMPE-EUROPE 2006, Paris, F.. p. 314-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing

    Steinberger, R., Leitao, T. I. V., Ladstätter, E., Billinger, W., Pinter, G. & Lang, R., 2006, In: International Journal of Fatigue. p. 1340-1347

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    IR-spektroskopische Analysen an coextrudierten Rohrmustern

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Kick Off Meeting of Task39 of the Solar Heating and Cooling Programme of the International Energy Agency

    Köhl, M. (Editor), Meir, M. (Editor), Zörner, W. (Editor) & Wallner, G. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  38. Published

    Kunststoffe - Neue Möglichkeiten in der Solarthermie

    Wallner, G. & Lang, R., 2006, In: Erneuerbare Energie. p. 10-12

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Kunststoffkollektoren mit integriertem Überhitzungsschutz

    Resch, K., Hausner, R. & Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Materialanalyse an extrudierten Verpackungsfolien

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Materialvergleich für Schiebedeckeln von Kühltruhen

    Steinberger, R. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Mechanische Basischarakterisierung des Epoxidharzes M10 (Epomid FL) im Trocken - und Feuchtzustand

    Pilz, G., Karpf, R. & Thiel, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Mechanische, thermo-mechanische und bruchmechanische Charakterisierung von Laminatwerkstoffen

    Pilz, G. & Wolfahrt, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Mechanische und thermoanalytische Tests an Composite Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Mechanische und thermomechanische Charakterisierung unterschiedlich pigmentierter Coil-Coating-Lackfilme

    Frank, A., 2006

    Research output: Thesis › Diploma Thesis

  46. Published

    Mikroskopische Charakterisierung und Topographie/Erscheinungsbild-Korrelationen bandbeschichteter Bleche

    Brandstätter, A., 2006, 78 p.

    Research output: Thesis › Diploma Thesis

  47. Published

    Moisture absorption of liner resins

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Optical Properties of Ethylene Copolymer Films for Solar Energy Conversion

    Oreski, G. & Wallner, G., 2006, EuroSun 2006. ISES, p. 5-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Polymeric Materials for Sustainable Development - WP Report "Erscheinungsbildcharakterisierung"

    Wallner, G., Buder-Stroisznigg, M. & Gruber, D., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Polymeric Materials for Sustainable Development - WP Report "Polymere Nanocomposites für die Solartechnik"

    Gruber, D., Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Polymeric Materials for Sustainable Development - WP Report "Symposium/IEA-Task “Materialien für die Solartechnik”"

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...24 25 26 27 28 29 30 31 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101