Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1401 - 1500 out of 1,629Page size: 100

Research output

  1. 2006
  2. Published

    Prüfungs- und Versagensanalyse für die explosive Dekompression elastomerer Dichtungen

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: GAK : Gummi, Fasern, Kunststoffe. p. 685-694

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Ranking of PE pipe grades by cyclic crack growth tests with cracked round bar specimens

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2475-2479

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Ranking of polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Ranking of Polyethylene pipe materials using fatigue loading of cracked round bar specimens

    Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Rauigkeitsmessungen an unterschiedlichen Kunststofffolien

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Solarthermische Kunststoffkollektoren mit integriertem Überhitzungsschutz

    Wallner, G., Resch, K. & Hausner, R., 2006, Gleisdorf Solar 2006. Arbeitsgemeinschaft Erneuerbare Energie, p. 105-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Special topics of polymer science and advanced characterization methods - WP Report "DSC-basierende Wärmeleitfähigkeitsmessung"

    Wallner, G. & Fischer, J., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Elektronenmikroskopie"

    Wallner, G. & Major, Z., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Nanoindentation"

    Wallner, G. & Major, Z., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Rastersondenmikroskopie"

    Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Röntgenkleinwinkelstreuung - Folien"

    Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Special topics of polymer science and advanced characterization methods - WP Report "Röntgenkleinwinkelstreuung - Rohrmaterialien"

    Wallner, G. & Pinter, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Structure-Infrared Optical Property-Correlations of C,O,H-Polymers for Transparent Insulation and Greenhouse Applications

    Wallner, G. & Oreski, G., 2006, In: Monatshefte für Chemie = Chemical monthly. 137, p. 899-910

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Structure-infrared optical property-correlations of polar ethylene copolymer films for solar applications

    Oreski, G. & Wallner, G., 2006, In: Solar energy materials and solar cells. 90, p. 1208-1219

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Task Definition Meeting for a Task of the Solar Heating and Cooling Programme of the International Energy Agency: "POLYMERIC MATERIALS FOR SOLAR THERMAL APPLICATIONS"

    Köhl, M. (Editor), Meir, M. (Editor), Zörner, W. (Editor) & Wallner, G. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  17. Published

    Tensile, Bending and Charpy Tests for GF-UP Materials W1 and W2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Tensile, Bending and Charpy Tests for Hybrid Materials W32 and W42

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Tensile tests for neat resin and calciumcarbon-ate filled resin formulations of Distitron 412 V2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Test and failure analyses methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: Rubber, fibres, plastics international. p. 93-100

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The Test Frequency dependence of the fatigue behavior of elastomers

    Major, Z., Feichter, C., Steinberger, R. & Lang, R., 2006, Fracture of Nano and Engineering Materials. Springer, p. 777-784

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Through-thickness process zone characterization at fatigue cracks in PE-HD

    Fuchs, F. E., 2006, 50 p.

    Research output: Thesis › Diploma Thesis

  23. Published

    Trommelschälversuch an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Untersuchungen an Polypropylen für eine Beizbeckenanwendung

    Balika, W. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Vergleichende Härtungscharakterisieerung von Laminatwerkstoffen mittels DEA, DSC und DMA

    Pilz, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Vergleichende Untersuchungen flächen- und kalandergeprägter PET-Laminatfolien

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Weathering of Commercial Ethylene Copolymer Films - Spectroscopical Analysis of Aging Behaviour and Additive Diffusion

    Oreski, G., Wallner, G., Eder, R. & Krasser-Lamik, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Weathering of Commercial Ethylene Copolymer Films - Spectroscopical Analysis of Aging Behaviour and Additive Diffusion

    Oreski, G., Wallner, G., Eder, R. & Krasser-Lamik, R., 2006, EuroSun 2006. ISES, p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Wood-Plastic Composites in Europe and North America A Market and Technical Analysis

    Daniel, M. J. W., 2006

    Research output: Thesis › Diploma Thesis

  30. Published

    Zugversuche an Kunststoffketten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Zugversuche an PET-Verpackungsbändern

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Zugversuche an stumpfgeschweißten Polyethylenrohren nach EN 12814-2

    Haager, M. J. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Zugversuch und Härteprüfung an Silikonelastomeren

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. 2005
  35. Published

    Verfahren zur Oberflächenanalyse eines Materials

    Gruber, D. (Inventor), Buder-Stroisznigg, M. (Inventor) & Wallner, G. (Inventor), 20 Jun 2005, Patent No. A 1036/2005

    Research output: Patent

  36. Published

    Adaptierung der prüftechnischen Einrichtungen zur mechanischen Prüfung von Klebstoffverbindungen

    Lang, R., Pilz, G. & Wolfahrt, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil2 (DA Eder)"

    Wallner, G., Eder, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Aging mechanisms and delamination behaviour of polymeric multi-layer films for PV encapsulation

    Oreski, G. & Wallner, G., 2005, Proceedings of ISES 2005 Solar World Congress. p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Aging mechanisms of polymeric films for PV encapsulation

    Oreski, G. & Wallner, G., 2005, In: Solar energy. 76, p. 612-617

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Aging of polymeric films for transparent insulation wall applications

    Wallner, G. & Lang, R., 2005, In: Solar energy. 79, p. 603-611

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    ANALYSIS OF A NEW TEST METHOD FOR HIGH RATE LOADING OF POLYMERS

    Flaggl, E. P., 2005

    Research output: Thesis › Diploma Thesis

  42. Published

    Anforderungsprofil für kalthärtende Klebstoffe im Flugzeuginnenraum

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Anwendung dere SIS/DSC-Methodik auf PE Werkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Applicability and limitations of various fracture mechanical testing concepts under static and cyclic loads

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Application of full-field strain and temperature measurement and analysis to polymer testing

    Major, Z., Steinberger, R., Feichter, C. & Friebe, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Basic Characterization of Polymeric Materials for Solar Collector Absorbers

    Kahlen, S., Wallner, G., Fischer, J., Meir, M. G. & Rekstad, J., 2005, NorthSun2005 – Electronic Proceedings. p. 8-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Bending tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Bestimmung der Bruchkraft von Kunststoffketten im monotonen Zugversuch

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Bestimmung der Glasübergangstemperatur mit dynamisch-mechanischer Analyse (DMA)

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Bestimmung der Zugeigenschaften von Folien aus Infusionsbeuteln (Phase 6)

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Blocker Door fretting fatigue test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Blocker Door fretting fatigue test - Karon B coating

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Brittle and ductile failure behavior of PE pipe grades

    Pinter, G., Major, Z., Haager, M. J. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Bruchmechanische Eigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Characterisation of the compression behavior of engineering polymers

    Jerabek, M., Steinberger, R. & Major, Z., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Characterization of the failure behavior of elastomers by fracture mechanics methods

    Major, Z., Balika, W., Feichter, C., Steinberger, R. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Characterization of the tensile-compression fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Charakterisierung der Auswirkungen unterschiedlicher Laminatvorbehandlung (Sandstrahlen) auf die Oberflächenqualität und den GIC-Wert von verklebten Laminaten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Charakterisierung der Topographie organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroissnigg, M., Kicker, H., Wallner, G., Gruber, D., Strauss, B. & Jandel, L., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Charakterisierung der Topographie organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Buder-Stroissnigg, M., Kicker, H., Wallner, G., Gruber, D., Strauss, B. & Jandel, L., 2005, Forum für Metallurgie und Werkstofftechnik. p. 2-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Charakterisierung des Ermüdungsrisswachstums in PE mit CT Proben - Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Charakterisierung des Impactverhaltens von PE-Methodenentwicklung

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Charakterisierung des spröden Risswachstums in Polyethylen-Rohrwerkstoffen mit beschleunigten Prüfmethoden

    Hiesch, T. J., 2005, 63 p.

    Research output: Thesis › Diploma Thesis

  64. Published

    Charakterisierung transparenter Formstoffe für Skier

    Wallner, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Charpy tests for TP-GFUP hybrid materials

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Comparison of thermomechanical properties and creep behaviour of HPM001 and HPM100

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Compression tests for pipe wall specimens

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Compression tests for pipe wall specimens, contacting and non-contacting deformation measurements

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Compression Tests on a Hobas CC-GRP Pipe Material

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Curing Process Control for Neat Resins by DSC, DMA and DEA

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Deformation behavior of polyolefins under monotonic loading - development and implementation of test methods

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Delamination behaviour of multi-layer films for PV encapsulation, Solar Energy Materials and Solar Cells

    Oreski, G. & Wallner, G., 2005, In: Solar energy. 89, p. 139-151

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Determination of "True Stress vs. True Strain" Data for Thin Molybdenum Sheets

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Development and implementation of a video extensometer system

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Development and implementation of non-contact strain and deformation test methods for polymeric materials and components - Thermography

    Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Development of fatigue test methods for elastomers - Standard and complex methods

    Feichter, C., Major, Z. & Lang, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Dielektrische Analyse (DEA) - Geräte und Leistungsmerkmale

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    DMA-Ringversuch

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Druckversuche an Composite-Proben - Compression strength and modulus measurements

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Druckversuche an Flugzeugbauteil-Komponenten

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Druckversuche an Kalibrierkörpern (Flugzeugbauteil-Komponenten)

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    DSC-Messungen an Achsen aus PBT-GF30

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Dynamic mechanical analysis for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Dynamisch-mechanische Analyse (DMA) von Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials

    Balika, W., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Einfluss der Härtungsbedingungen auf Reinharz-Schlüsseleigenschaften

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften eines Epoxidharz - Matrixwerkstoffes

    Wolfahrt, M., Pilz, G. & Lang, R., 2005, 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Entwicklung von Gießformen für die Reinharzhärtung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Ermüdungsrisswachstumsversuche an CT Proben aus PE bei 10 Hz

    Haager, M. J., Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Fatigue behavior of RTM laminates

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2005, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Fatigue crack growth in PE-HD pipe grades

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2005, In: Plastics, rubber and composites. 34, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Fatigue of Glass-Fiber Reinforced Plastics - Characterization Methods and Structure-Property-Relationsships

    Zahnt, B.-A. & Lang, R., 2005, Series on Advances in Experimental Mechanics Volume 9. p. 107-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Feuchteaufnahmeverhalten von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Fracture mechanical tests for HPM001

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Fracture mechanical tests for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Fracture surface anaylsis

    Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Guest Editoral

    Wallner, G. & Lang, R., 2005, In: Solar energy. p. 571-572

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Härtungscharakterisierung von Reinharzen mit dynamischer Differ-enzkalorimetrie (DSC)

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Impact bending tests (Charpy) for liner resins

    Pilz, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation and experiments

    Feichter, C., Major, Z. & Lang, R., 2005, In: VLK-News. p. 6-12

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Influence of crack tip sharpness and radius on the strain distribution in rubbers analyzed by finite element simulation experiments

    Feichter, C., Major, Z. & Lang, R., 2005, European Conference on Constitutive Models for Rubber IV (ECCMR 2005). Balkema, p. 89-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Instrumentierte Impactversuche an Rohren aus Polypropylen in Anlehnung an EN 744

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...11 12 13 14 15 16 17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101