Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

551 - 600 out of 1,629Page size: 50

Research output

  1. 2016
  2. Published

    Damage mechanics of composites under fatigue loads

    Rieser, R., 2016

    Research output: Thesis › Master's Thesis

  3. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups

    Manhart, J. C., Ayalur Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G. G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 2016, 9, p. 524-529

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Radl, S. V., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Data in Brief. 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Design and application of photo-reversible elastomer networks by using the [4πs+4πs] cycloaddition reaction of pendant anthracene groups

    Manhart, J., Ayalur-Karunakaran, S., Oesterreicher, A., Radl, S. V., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Grießer, T. & Schlögl, S., 2016, In: Polymer. 102.2016, October, p. 10-20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Design and development of a testing machine for compressive creep tests on polymers at elevated temperatures

    Brunbauer, S., 2016

    Research output: Thesis › Master's Thesis

  7. Published

    Development and implementation of an accelerated method for chlorine dioxide exposure

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, In: AIP Conference Proceedings. 1779, 070009.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Effect of repair design and surface treatment on adhesively bonded composite repairs

    Röper, F., Wolfahrt, M., Kucher, G., Bubestinger, A. & Pinter, G., 2016, Proceedings ECCM 17. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers

    Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R. & Grießer, T., 2016, In: Macromolecular rapid communications. 37

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Exploring thiol-yne based monomers as low cytotoxic building blocks for radical photopolymerization

    Oesterreicher, A., Ayalur-Karunakaran, S., Moser, A., Mostegel, F., Edler, M., Kaschnitz, P., Pinter, G., Trimmel, G., Schlögl, S. & Grießer, T., 2016, In: Journal of polymer science : A, Polymer chemistry. 54, p. 3484-3494

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Herstellung und Charakterisierung von Verbundwerkstoffen aus thermoplastischen Biopolymeren und pflanzlichen Kurzfasern

    Gerstbauer, F., 2016

    Research output: Thesis › Master's Thesis

  13. Published

    High temperature phase change materials for the overheating protection if facade integrated solar thermal collectors, Energy and Buildings

    Hengstberger, F., Zauner, C., Resch-Fauster, K., Holper, S. & Grobbauer, M., 2016, In: Energy and Buildings. 124

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Impact of the acrylonitrile content on the mechanical performance of elastomeric materials

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Rubber, fibres, plastics international. p. 40 - 47

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Implementation of a New Chlorine Dioxide Device for Accelerated Aging of Polyolefin Pipe Materials

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016, Proceedings PVSEC.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of backsheet type on formation of acetic acid in PV modules

    Mihaljevic, A., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Influence of cyclic stress intensity threshold on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

    Mujtaba, A., Stelzer, S., Brunner, A. & Jones, R., 2016, In: Composite structures.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Influence of the Processing conditions on morphology and fracture mechanical properties of unfilled polyoxymethylene (POM)

    Halb, M., 2016

    Research output: Thesis › Master's Thesis

  20. Published

    Influence of thermo-oxidative ageing of HNBR in oil field applications

    Balasooriya, W., Schrittesser, B., Ayalur-Karunakaran, S., Schlögl, S., Pinter, G., Schwarz, T. & Kadar, Z., 2016.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Mechanical Properties of Composites Used in High-Voltage Applications

    Moser, A. & Feuchter, M., 2016, In: Polymers / Molecular Diversity Preservation International.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Modified Hartman-Schijve fitting of mode I delamination fatigue data and the resulting variation in threshold values Gthr

    Brunner, A., Mujtaba, A., Stelzer, S. & Jones, R., 2016, Procedia Structural Integrity. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Natural and artifical ageing on backsheets - Comparison of degradation effects

    Ottersböck, B., Oreski, G. & Pinter, G., 2016.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Photoreversible Crosslinking of Elastomeric Materials Comprising Spatially Resolved Switchable Characteristics

    Kaiser, S., Manhart, J. C., Ayalur Karunakaran, S., Moser, A., Oesterreicher, A., Pinter, G. G., Teichert, C., Grießer, T., Kern, W. & Schlögl, S., 2016.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Polybutylensuccinat als potentieller Substitutionswerkstoff für Polypropylen und Polybuten

    Klutz, A., 2016

    Research output: Thesis › Master's Thesis

  26. Published

    Rapid Gas Decompression Performance of elastomers - A study of influencing testing parameters

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2016, In: Procedia Structural Integrity. 2, p. 1746-1754 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Residual stress distribution in extruded polyolefin pipes

    Hutař, P., Poduska, J., Kučera, J., Nezbedová, E., Frank, A., Sadilek, J. & Pinter, G., 2016, Proceedings Plastics Pipes XVIII. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Residual stress in polyethylene pipes

    Poduska, J., Hutař, P., Kučera, J., Frank, A., Sadilek, J., Pinter, G. & Náhlík, L., 2016, In: Polymer Testing. 54, p. 288 295 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Significance of epoxy network properties for the toughening effect of flaky and fullerene-like WS2 nanoparticles

    Haba, D., Barbezat, M., Ayalur-Karunakaran, S., Schlögl, S., Brunner, A. & Pinter, G., 2016, In: Journal of polymer science : B, Polymer physics. 54, 17, p. 1738 1747 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Strength and damage tolerance of composite–composite joints with steel and titanium through the thickness reinforcements

    Stelzer, S., Ucsnik, S. & Pinter, G., 2016, In: Composites Part A: Applied Science and Manufacturing. 88, p. 39–47

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    The effect of residual stress on the process of crack growth rate determination in polymer pipes

    Poduska, J., Hutař, P., Kucera, J., Sadilek, J., Frank, A., Pinter, G. & Náhlík, L., 2016, Solid State Phenomena . 258 ed. p. 174 177 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  32. Published

    Thiol‐Ene versus Binary Thiol–Acrylate Chemistry: Material Properties and Network Characteristics of Photopolymers

    Sahin, M., Ayalur Karunakaran, S., Manhart, J. C., Wolfahrt, M., Kern, W. & Schlögl, S., 2016, In: Advanced engineering materials. 2016, 19, 19.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thiol-Yne Derived Photopolymers from Low-Cytotoxic 3D-Printing Resins

    Hartmann, D., Oesterreicher, A., Edler, M., Moser, A., Pinter, G. & Grießer, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner , R., Edler, M., Pinter, G. & Grießer, T., 2016, In: Polymer Chemistry. 7, p. 5169-5180

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Toughening of epoxy with WS2 nanoparticles

    Haba, D., 2016

    Research output: Thesis › Doctoral Thesis

  36. Published

    Untersuchung der mechanischen Rezyklierbarkeit von technischen Biokunststoffen

    Blees, E. C., 2016

    Research output: Thesis › Master's Thesis

  37. 2015
  38. Published

    On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

    Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dec 2015, In: Materials & design. 87, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Characterization of the aging behaviour of various polyamide materials - part II

    Pilz, G. & Pinter, G., 30 Oct 2015

    Research output: Book/Report › Other report › Transfer

  40. Published

    Nanocomposite Hydrogels - Fracture Toughness and Energy Dissipation Mechanisms

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 8 Oct 2015, In: Journal of polymer science : B, Polymer physics. 53, p. 1763 - 1773 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Heute schon an morgen denken

    Klein, A., Blees, E. C. & Resch, K., 7 Oct 2015, In: Recycling-Magazin. 19, p. 30 33 p.

    Research output: Contribution to journal › Article › Research

  42. Published

    The Cyclic CRB Test – A Quick Test for Assessing Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 25 Sept 2015, PPS 2015 - Book of Abstracts. p. 104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Ševčík, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 23 Sept 2015, PPS 2015 - Book of Abstracts. p. 134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    The Cyclic CRB Test - A Quick Test for Assessing the Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions

    Primetzhofer, A., Pinter, G., Mösenbacher, A. & Haslinger, T., 22 Sept 2015.

    Research output: Contribution to conference › Paper

  46. Published

    Mechanical Recycling of Technical Biopolymers - Possibilities & Limits: Mechanisches Recycling von technischen Biopolymeren - Möglichkeiten und Limits

    Klein, A., 22 Sept 2015, Proceedings of PPS 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Sevcik, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 22 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Promising Biocompatible Monomers for Thiol-yne Based Photopolymers

    Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Mostegel, F., Samusjew, A., Edler, M., Pinter, G. & Grießer, T., 21 Sept 2015, Regional Conference Polymer Processing Society Graz 2015 - Book of Abstracts. p. 295 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    aliphatic Polyketones - Mechanical and Thermo-Mechanical Behaviour in Wet Environments

    Guttmann, P. & Pilz, G., 9 Sept 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Evaluation of Mechanical Recyclability of Technical Biopolymers

    Klein, A., Blees, E. C. & Resch, K., 8 Sept 2015, Book of Abstracts of the 8th International Symposium on Feedstock Recycling of Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    AFM Investigation of Epoxy Fracture Surfaces Indicating Nanoplasticity

    Haba, D., Barbezat, M. & Brunner, A. J., 27 Aug 2015, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE NANOMATERIALS: APPLICATIONS AND PROPERTIES: NAP-2015. Sumy / Ukraine: Sumy State University, Vol. 4 / 1. 4 p. 01MAN01

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...8 9 10 11 12 13 14 15 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101