Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

151 - 200 out of 682Page size: 50

Research output

  1. 2022
  2. E-pub ahead of print

    Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. J. & Franz, R., 22 Apr 2022, (E-pub ahead of print) In: Surface & coatings technology. 439.2022, 15 June, 10 p., 128446.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Thermal stability of a cathodic arc evaporated Cr 0.74 Ta 0.26 N coating

    Kainz, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C., Pohler, M. & Schalk, N., 22 Apr 2022, (E-pub ahead of print) In: Materialia. 22.2022, May, 8 p., 101434.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Erratum to “Energetic balance and kinetics for the decomposition of supersaturated Ti1-xAlxN” [Acta Materialia 55 (2007) 1441–1446]

    Mayrhofer, P. H., Fischer, F.-D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 1 Apr 2022, In: Acta Materialia. 227.2022, 1 April, 1 p., 117741.

    Research output: Contribution to journal › Letter › peer-review

  5. Published

    Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 1 Apr 2022, In: Scripta materialia. 211.2022, 1 April, 5 p., 114492.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Influence of multilayer architecture on microstructure and fracture properties of arc evaporated TiAlTaN coatings

    Waldl, H., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Mar 2022, In: Surface & coatings technology. 433.2022, 15 March, 7 p., 128098.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

    Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 Mar 2022, In: Materials and Design. 216.2022, April, 8 p., 110530.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thickness

    Frank, F., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 25 Feb 2022, In: Surface & coatings technology. 432.2022, 25 February, 9 p., 128070.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Biocompatibility and antibacterial properties of TiCu(Ag) thin films produced by physical vapor deposition magnetron sputtering

    Rashid, S., Vita, G. M., Persichetti, L., Iucci, G., Battocchio, C., Daniel, R., Visaggio, D., Marsotto, M., Visca, P., Bemporad, E., Ascenzi, P., Capellini, G., Sebastiani, M. & di Masi, A., 30 Jan 2022, In: Applied surface science. 573.2022, 30 January, 12 p., 151604.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Materials Engineering for Flexible Metallic Thin Film Applications

    Cordill, M. J., Kreiml, P. & Mitterer, C., 25 Jan 2022, In: Materials. 15.2022, 3, 25 p., 926.

    Research output: Contribution to journal › Review article › peer-review

  12. Published

    Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community

    Schalk, N., Tkadletz, M. & Mitterer, C., 15 Jan 2022, In: Surface & coatings technology. 429.2022, 15 January, 30 p., 127949.

    Research output: Contribution to journal › Review article › peer-review

  13. Published

    Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries

    Daniel, R., Zalesak, J., Matko, I., Baumegger, W., Hohenwarter, A., George, E. P. & Keckes, J., 15 Jan 2022, In: Acta materialia. 223.2022, 15 January, 8 p., 117470.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of B content on microstructure, phase composition and mechanical properties of CVD Ti(B,N) coatings

    Tkadletz, M., Schalk, N., Lechner, A., Hatzenbichler, L., Holec, D., Hofer, C., Deluca, M., Sartory, B., Lyapin, A., Julin, J. & Czettl, C., 10 Jan 2022, In: Materialia. 21.2022, March, 9 p., 101323.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations

    Gsellmann, M., Scheiber, D., Klünsner, T., Zalesak, J., Zhang, Z., Leitner, H., Mitterer, C., Ressel, G. & Romaner, L., 1 Jan 2022, In: Acta materialia. 222.2022, 1 January, 9 p., 117439.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Nanoporous polymer-derived activated carbon for hydrogen adsorption and electrochemical energy storage

    Kostoglou, N., Koczwara, C., Stock, S., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Paris, O., Rebholz, C. & Mitterer, C., 1 Jan 2022, In: Chemical Engineering Journal. 427.2021, 1 January, 10 p., 131730.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Combined electro-mechanical and tribological behavior of MoN films deposited on thin polyimide foils

    Rebelo de Figueiredo, M., Kirchmair, M., Kobierska, E., Kreiml, P., Franz, R. & Cordill, M., 2022.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Development of TiAlN based hard coatings applying advanced characterization methods

    Waldl, H., 2022

    Research output: Thesis › Doctoral Thesis

  19. Published

    Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers

    Cordill, M., Kreiml, P., Putz, B., Trost, C. O. W., Lassnig, A., Mitterer, C., Faurie, D. & Renault, P.-O., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103455.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    High-temperature micromechanical testing of silicon

    Schaffar, G. J. K. & Tscharnuter, D., 2022.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Investigation of MoNbTaW-X(X=Ti, V, Cr, Mn, Hf) refractory high entropy alloy thin films deposited by high power impulse magnetron sputtering

    Gruber, G., Žák, S., Lassnig, A., Gammer, C., Cordill, M. J. & Franz, R., 2022.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Microstructure and mechanical properties of TiN/CrN multilayer coatings deposited in an industrial-scale HiPIMS system

    Sala Bascompte, N., Abad, M. D., Rebelo de Figueiredo, M., Franz, R., Kainz, C. & Colominas, C., 2022.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Microstructure, mechanical properties and thermal stability of arc evaporated Cr0.69Ta0.20B0.11N coatings

    Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Oxidation mechanism of TiSiN and TiAlSiN coatings investigated by in-situ X-ray diffraction

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C., Pohler, M. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Oxidation resistance of arc-evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Synthesis and characterization of B1-AlN containing superlattice structures

    Becker, M.-T., 2022

    Research output: Thesis › Master's Thesis

  27. Published

    The micromechanical characterization of silicon up to 950

    Schaffar, G. J. K., Tscharnuter, D., Imrich, P. J. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  28. Published

    TiN/CrN , TiSiN/CrN and NbN/CrN multilayer coatings deposited in an industrial scale HiPIMS system

    Sala Bascompte, N., Rebelo de Figueiredo, M., Franz, R., Kainz, C., Colominas, C. & Abad, M. D., 2022.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Tuning the microstructure of MoNbTaWZr high entropy alloy films by adjusting the HiPIMS parameters

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. J. & Franz, R., 2022.

    Research output: Contribution to conference › Poster › Research

  30. Published

    ZrN-based hard coatings deposited by chemical and physical vapor deposition

    Frank, F., 2022

    Research output: Thesis › Doctoral Thesis

  31. 2021
  32. Published

    The influence of bias voltage on structure, thermal stability and mechanical properties of arc evaporated Cr0.69Ta0.20B0.11N coatings

    Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 25 Dec 2021, In: Surface & coatings technology. 428.2021, 25 December, 8 p., 127867.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Mogeritsch, J., Kharicha, A., Kolozsvári, S., Mitterer, C. & Franz, R., 20 Dec 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 94:2021, 20 December, p. 147-163 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of the deposition parameters on the nanolamella periodicity of chemical vapor deposited Ti1-xAlxN

    Saringer, C., Tkadletz, M., Thurner, J., Czettl, C. & Schalk, N., 15 Dec 2021, In: Materials letters. 305.2021, 15 December, 4 p., 130819.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

    Renk, O., Enzinger, R. J., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., 30 Nov 2021, In: Physical review materials . 5.2021, 11, 113609.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Fracture properties of α– and k–Al2O3 hard coatings deposited by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Czettl, C. & Schalk, N., 4 Nov 2021, In: Coatings. 11.2021, 11, 10 p., 1359.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Anisotropic wet-chemical etching for preparation of freestanding films on Si substrates for atom probe tomography: A simple yet effective approach

    Tkadletz, M., Lechner, A., Pölzl, S. & Schalk, N., Nov 2021, In: Ultramicroscopy. 230, 113402, p. 1-4 113402.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Mechanical properties of CrN-based superlattices: Impact of magnetism

    Löfler, L., Hahn, R., Mayrhofer, P. H., Bartosik, M. & Holec, D., 1 Oct 2021, In: Acta materialia. 218.2021, 1 October, 13 p., 117095.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings

    Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 8 p., 127461.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Improved fracture resistance of Cu/Mo bilayers with thickness tailoring

    Cordill, M. J., Jörg, T., Többens, D. & Mitterer, C., Sept 2021, In: Scripta materialia. 202.2021, September, 5 p., 113994.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Morphology of cracks and shear bands in polymer-supported thin film metallic glasses

    Glushko, O., Gammer, C., Weniger, L.-M., Sheng, H., Mitterer, C. & Eckert, J., Sept 2021, In: Materials Today Communications. 28.2021, September, 11 p., 102547.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Flexible nanoporous activated carbon for adsorption of organics from industrial effluents

    Zulfiqar, U., Kostoglou, N., Thomas, A. G., Rebholz, C., Matthews, A. & Lewis, D. J., 27 Aug 2021, In: Nanoscale. 13.2021, 36, p. 15311-15323 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Porosity evolution in organic matter-rich shales (Qingshankou Fm.; Songliao Basin, NE China): Implications for shale oil retention

    Zhang, P., Misch, D., Hu, F., Kostoglou, N., Sachsenhofer, R., Liu, Z., Meng, Q. T. & Bechtel, A., Aug 2021, In: Marine and petroleum geology. 130.2021, August, p. 1-17 17 p., 105139.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 15 Jul 2021, In: Surface & coatings technology. 417.2021, 15 July, 8 p., 127212.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments

    Alfreider, M., Meindlhumer, M., Maier-Kiener, V., Hohenwarter, A. & Kiener, D., 14 Jun 2021, In: Journal of materials research (JMR). 36.2021, 11, p. 2291-2304 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Additive manufacturing of magnesium alloy using uniform droplet spraying: modeling of microstructure evolution

    Jaffar, S. M., Kostoglou, N., Fukuda, H., Rebholz, C., Ando, T., Liao, Y. & Doumanidis, C. C., Jun 2021, In: MRS Advances. 6, 15, p. 391-403 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    High temperature nanoindentation as a tool to investigate plasticity upon phase transformations demonstrated on Cobalt

    Kappacher, J., Tkadletz, M., Clemens, H. & Maier-Kiener, V., May 2021, In: Materialia. 16.2021, May, 9 p., 101084.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 29 Apr 2021, (E-pub ahead of print) In: Surface & coatings technology. 418.2021, 25. July, 7 p., 127237.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Microstructure and Mechanical Properties of ZrN, ZrCN and ZrC Coatings Grown by Chemical Vapor Deposition

    Frank, F., Tkadletz, M., Czettl, C. & Schalk, N., 22 Apr 2021, In: Coatings. 11.2021, 5, p. 1-13 491.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

    Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 31 Mar 2021, In: Materials and Design. 204.2021, June, 11 p., 109690.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings

    Drnovsek, A., Vo, H., Rebelo de Figueiredo, M., Kolozsvári, S., Hosemann, P. & Franz, R., 15 Mar 2021, In: Surface & coatings technology. 409.2021, 15 March, 7 p., 126909.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...14 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben
  • Main phone number: +43 3842 402 4201