Chair of Ceramics (320)
Organisational unit: Chair
Research output
- 2015
- Published
Investigation of Magnesia Chromite Brick Wear Phenomena - Post Mortem Analysis From a Lead Recycling Furnace
Gregurek, D., Majcenovic, C., Reinharter, K., Reiter, V., Wenzl, C., Spanring, A. & Harmuth, H., 2015, In: RHI bulletin : the journal of refractory innovations. 2/2015, p. 24-28 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Investigation of refractories for the bottom casting of special steel grades / Untersuchung von Feuerfeststoffen für den steigenden Guss von Spezialstählen
Auer, T., Harmuth, H. & Löcker, C., 2015. 1 p.Research output: Contribution to conference › Paper › peer-review
- Published
Mikromechanische Simulation der Gefügeausbildung und der Eigenschaften einer Magnesia-Spinell Keramik
Fasching, C., 2015Research output: Thesis › Doctoral Thesis
- Published
Nonoxides in ordinary refractory ceramics - phases, compositions and analysis
Atzenhofer, C., Gschiel, S. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 17 1 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Nonoxides in ordinary refractory ceramics - phases, compositions and analysis
Atzenhofer, C., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Phase formation in mould powders and mould slags during service
Marschall, I. & Harmuth, H., 2015, Mitteilung der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 83 1 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Phase formation in mould powders and mould slags during service
Marschall, I. & Harmuth, H., 2015.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Premature wear in the hearth of a blast furnance and its diminution by the application of titanium dioxide
Fünders, D., Harmuth, H. & Pötschke, J., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 62Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIES AT SERVICE RELATED LOADS
Sidi Mammar, A., Jin, S., Harmuth, H. & Gruber, D., 2015, UNITERC 2015. 14th Biennial Worldwide Congress (ed.). 1 p. 186Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Toward CFD Modeling of Slag Entertainment in Gas Stirred Ladles
Huang, A., Harmuth, H., Doletschek, M., Vollmann, S. & Feng, X., 2015, In: Steel research international. 86, 12, p. 1447-1454 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Untersuchung der Auflösungskinetik von ZrO2 und Al2O3 in Gießschlacken mit einem konfokalen Laser- Scanning- Mikroskop bei hoher Temperatur
Schachner, S., 2015Research output: Thesis › Master's Thesis
- Published
Untersuchung der Synthesebedingungen von ZrX (X=O,C,N)
Preisinger, M., 2015Research output: Thesis › Master's Thesis
- Published
Wear of magnesia bricks in the permanent lining of a ladle tank degassing unit
Harmuth, H., Auer, T. & Bertignol, M., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 90Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2014
- Published
Formation of hollow MgO-rich spinel whiskers in low carbon MgO-C refractories with Al additives
Zhu, T., Li, Y., Sang, S., Jin, S. & Wang, H., Dec 2014, In: Journal of the European Ceramic Society. 34, 16, p. 4425-4432Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructures and mechanical properties of Al2O3-C refractories using nickel-loaded ultrafine microcrystalline graphite and silicon additives
Wang, H., Li, Y., Sang, S., Jin, S., Xu, Y., Yang, K. & Yu, S., Dec 2014, In: Ceramics International : CI. 40, 10, p. 15783-15793Research output: Contribution to journal › Article › Research › peer-review
- Published
Change of mold slag composition during slab casting of steel with high Al content
Harmuth, H. & Xia, G., 24 Oct 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, 11, p. 447-453Research output: Contribution to journal › Article › Research
- Published
Effect of nanocarbon sources on microstructure and mechanical properties of MgO-C refractories
Zhu, T., Li, Y., Sang, S., Jin, S., Li, Y., Zhao, L. & Liang, X., Apr 2014, In: Ceramics International : CI. 40, 3, p. 4333-4340Research output: Contribution to journal › Article › Research › peer-review
- Published
A laser irradiation disc test for fracture testing of refractory fine ceramics
Gruber, D. & Harmuth, H., 2014, In: Journal of the European Ceramic Society. 34, p. 4021-4029Research output: Contribution to journal › Article › Research › peer-review
- Published
Change of mold slag composition during slab casting of steel with high Al content
Harmuth, H. & Xia, G., 2014, 8th European Continuous Casting Conference. p. 952-961Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques
Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042Research output: Contribution to journal › Article › Research › peer-review
