Practical metallography = Praktische Metallographie, ‎0032-678X

Journal

ISSNs0032-678X
41 - 60 out of 78Page size: 20

Research output

  1. 2015
  2. Published

    Preparation of carbide-free bainitic steels for EBSD investigations

    Hofer, C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 384-395

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Standardized Iron Ore Characterization Methodology for Metallurgy

    Kolb, F., Mali, H., Pichler, A. & Schenk, J., 2015, In: Practical metallography = Praktische Metallographie. 52, p. 5-20

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2014
  6. Published

    Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2014, In: Practical metallography = Praktische Metallographie. 51, p. 557-567

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2013
  8. Published

    Nichtmetallische Einschlüsse in Edelstählen: Korrelation von unterschiedlichen Prüfmethoden

    Tazreiter, A., Schützenhöfer, W., Beck, R. & Schumacher, P., 2013, In: Practical metallography = Praktische Metallographie. Sonderband, p. 221-226

    Research output: Contribution to journal › Article › Research

  9. 2012
  10. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Microstructural investigation of melt-spun NiTi based ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 544-555

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing

    Moser, G., Felber, H., Rashkova, B., Imrich, P. J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G. & Kiener, D., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 343-355

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2011
  14. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In: Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht - eine Fortsetzung

    Clemens, H. & Mayer, S., 2011, In: Practical metallography = Praktische Metallographie. p. 64-100

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Microstructural Changes during Vacuum Carburizing of Steels

    Bruncko, M., Anzel, I. & Kneißl, A., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 398-407

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    The Characterisation of a Powder Metallurgically Manufactured TNMTM Titanium Aluminide Alloy Using Complimentary Quantitative Methods

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 594-604

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2010
  25. Published

    Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

    Lube, T., Kraleva, I. & Veskovic, S., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 159-164

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Influence of Surface Quality on the biaxial Strength of Silicon Nitride

    Harrer, W., Danzer, R. & Supancic, P., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 141-146

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations