Practical metallography = Praktische Metallographie, ‎0032-678X

Journal

ISSNs0032-678X
21 - 30 out of 78Page size: 10

Research output

  1. 2011
  2. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In: Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht - eine Fortsetzung

    Clemens, H. & Mayer, S., 2011, In: Practical metallography = Praktische Metallographie. p. 64-100

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Microstructural Changes during Vacuum Carburizing of Steels

    Bruncko, M., Anzel, I. & Kneißl, A., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 398-407

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    The Characterisation of a Powder Metallurgically Manufactured TNMTM Titanium Aluminide Alloy Using Complimentary Quantitative Methods

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 594-604

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations