Practical metallography = Praktische Metallographie, ‎0032-678X

Journal

ISSNs0032-678X
61 - 70 out of 78Page size: 10

Research output

  1. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journal › Article › Research › peer-review

  2. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Metallographische Präparationsmethoden für die Rasterkraftmikroskopie - Rasterkraft-mikroskopie als Werkzeug für die Materialographie

    Schöberl, T., 2004, In: Practical metallography = Praktische Metallographie. 41, p. 321-333

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Etching methods for the microstructural characterization of a heat resistant 2.25Cr-1Mo-0.25V weld metal

    Schönmaier, H., Pölzgutter, M. & Schnitzer, R., 7 Jan 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 1, p. 5-30 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Beryllium – A challenge for preparation and mechanical characterization

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 10, p. 624-633 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Nichtmetallische Einschlüsse in Edelstählen: Korrelation von unterschiedlichen Prüfmethoden

    Tazreiter, A., Schützenhöfer, W., Beck, R. & Schumacher, P., 2013, In: Practical metallography = Praktische Metallographie. Sonderband, p. 221-226

    Research output: Contribution to journal › Article › Research

Previous 1...3 4 5 6 7 8 Next
View graph of relations