Polymer Testing, ‎0142-9418

Journal

ISSNs0142-9418
1 - 51 out of 51Page size: 100

Research output

  1. 2025
  2. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. E-pub ahead of print

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 May 2024, (E-pub ahead of print) In: Polymer Testing. 134.2024, May, 13 p., 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Investigation into the state of cure of elastomers through nanoindentation

    Schieppati, J., Gehling, T., Azevedo, M., Kerschbaumer, R. C., Christöfl, P., Oreski, G., Fasching, M. A., Schwarz, T. & Pinter, G., 1 Apr 2024, In: Polymer Testing. 133.2024, April, 9 p., 108417.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysis

    Klingler, A., Gilberg, M., Reisinger, D., Schlögl, S., Wetzel, B. & Krüger, J. K., 14 Jan 2024, (E-pub ahead of print) In: Polymer Testing. 131.2024, February, 9 p., 108340.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2023
  8. Published

    Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

    de Carvalho, W. S., Marzemin, F., Belei, C., Petersmann, S., Arbeiter, F. & de Traglia Amancio-Filho, S., 15 Sept 2023, In: Polymer Testing. 128.2023, November, 13 p., 108207.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methods

    Oreski, G., Ottersböck, B., Barretta, C., Christöfl, P., Radl, S. & Pinter, G. G., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108130.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy

    Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124.2023, July, 10 p., 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2021
  14. Published

    Prediction of polyethylene density from FTIR and Raman spectroscopy using multivariate data analysis

    Bredács, M., Barretta, C., Castillon, L. F., Frank, A., Oreski, G., Pinter, G. & Gergely, S., Dec 2021, In: Polymer Testing. 104.2021, December, 8 p., 107406.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride

    Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F. & Pinter, G., 19 Feb 2021, In: Polymer Testing. 95.2021, March, 7 p., 107125.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2020
  17. Published

    Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation

    Christöfl, P., Czibula, C., Berer, M., Oreski, G., Teichert, C. & Pinter, G., 27 Nov 2020, In: Polymer Testing. 93.2021, January, 9 p., 106978.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept 2020, In: Polymer Testing. 89, September, 10 p., 106637.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Slow crack growth resistance of modern PA-U12 grades measured by cyclic cracked round bar tests and strain hardening tests

    Messiha, M., Gerets, B., Heimink, J., Frank, A., Arbeiter, F. & Engelsing, K., 3 Mar 2020, In: Polymer Testing. 86.2020, June, 11 p., 106468.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation

    Khudiakova, A., Grasser, V., Blumenthal, C., Wolfahrt, M. & Pinter, G. G., 1 Feb 2020, In: Polymer Testing. 82.2020, February, 106304.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Tribological characteristics of medical gloves in contact with human skin and skin equivalents

    Manhart, J., Hausberger, A., Maroh, B., Holzner, A., Schaller, R., Kern, W. & Schlögl, S., Feb 2020, In: Polymer Testing. 82.2020, February, 7 p., 106318.

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2019
  23. E-pub ahead of print

    Comparison of steady-state and transient thermal conductivity testing methods using different industrial rubber compounds

    Kerschbaumer, R. C., Stieger, S., Gschwandl, M., Hutterer, T., Fasching, M., Lechner, B., Meinhart, L., Hildenbrandt, J., Schrittesser, B., Fuchs, P. F., Berger-Weber, G. & Friesenbichler, W., 26 Sept 2019, (E-pub ahead of print) In: Polymer Testing. 80.2019, December, p. 1-8 8 p., 106121.

    Research output: Contribution to journal › Article › Research

  24. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2018
  26. Published

    An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dec 2018, In: Polymer Testing. 72, p. 271-284 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    A novel hyperbolic slit contraction with constant strain rate for elongational rheology of polymer melts

    Luger, H.-J., Löw-Baselli, B., Neunhäuserer, A., Friesenbichler, W. & Miethlinger, J., 9 Nov 2018, In: Polymer Testing. 73.2019, February, p. 104-114 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of different polyol segments on the crystallisation behavior of polyurethane elastomers measured with DSC and DMA experiments

    Ziegler, W., Guttmann, P., Kopeinig, S., Dietrich, M., Amirosanloo, S., Riess, G. & Kern, W., 1 Oct 2018, In: Polymer Testing. 71.2018, October, p. 18-26 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Induced material degradation of elastomers in harsh environments

    Balasooriya, W., Schrittesser, B., Pinter, G. & Schwarz, T., 15 May 2018, (E-pub ahead of print) In: Polymer Testing. 69.2018, August, p. 107-115 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts

    Moder, J., Grün, F., Summer, F., Kohlhauser, M. & Wohlfahrt, M., 1 Apr 2018, In: Polymer Testing. 66, p. 371-382 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 12 Mar 2018, In: Polymer Testing. 67.2018, May, p. 309-321 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 24-31 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2017
  35. Published

    Mechanical recyclability of technical biopolymers: Potential and limits

    Resch-Fauster, K., Klein, A., Blees, E. & Feuchter, M., 1 Dec 2017, In: Polymer Testing. 64.2017, December, p. 287-295 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2016
  37. E-pub ahead of print

    A novel online rheometer for elongational viscosity measurement of polymer melts

    Köpplmayr, T., Luger, H.-J., Burzic, I., Battisti, M., Perko, L., Friesenbichler, W. & Miethlinger, J., 23 Jan 2016, (E-pub ahead of print) In: Polymer Testing. 50.2016, April, p. 208-215 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Residual stress in polyethylene pipes

    Poduska, J., Hutař, P., Kučera, J., Frank, A., Sadilek, J., Pinter, G. & Náhlík, L., 2016, In: Polymer Testing. 54, p. 288 295 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2015
  40. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers

    Arbeiter, F., Schrittesser, B., Frank, A., Berer, M. & Pinter, G., 3 Jun 2015, In: Polymer Testing. 45, p. 83-92 10 p., 4441.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Method to characterize the damping behavior of thin passively constrained layer laminates using dynamic mechanical analysis (DMA) in shear mode

    Knapp, G., Oreski, G. & Pinter, G., 2015, In: Polymer Testing. 42, p. 215 224 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermal expansion behavior of solar cell encapsulation materials

    Knausz, M., Oreski, G., Schmidt, M., Guttmann, P., Berger, K. A., Voronko, Y., Eder, G., Koch, T. & Pinter, G., 2015, In: Polymer Testing. 44, p. 160-167

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2014
  45. Published

    A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. 39, p. 12-19

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer

    Arbeiter, F., Pinter, G. & Frank, A., 2014, In: Polymer Testing. 37, p. 186-192

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. p. 42-48

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test

    Kratochvilla, T., Andreas, F. & Pinter, G., 2014, In: Polymer Testing. 40, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool

    Frank, A. & Pinter, G., 2014, In: Polymer Testing. 38, p. 161-171

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model

    Gruber, D. P., Macher, J., Haba, D., Berger, G., Pacher, G. & Friesenbichler, W., 2014, In: Polymer Testing. 33, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    On the strain measurement and stiffness calculation of carbon fibre reinforced composites under quasi-static tensile and tension-tension fatigue loads

    Brunbauer, J. & Pinter, G., 2014, In: Polymer Testing. 40, p. 256-264

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

    Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, In: Polymer Testing.

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2013
  54. Published

    Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

    Berer, M. & Pinter, G., 2013, In: Polymer Testing. 32, p. 870-879

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2011
  56. Published

    Novel approach to the measurement of the visual perceptibility of sink marks on injection molding parts

    Gruber, D. P., Berger, G., Pacher, G. & Friesenbichler, W., 2011, In: Polymer Testing. p. 651-656

    Research output: Contribution to journal › Article › Research › peer-review

  57. 2010
  58. Published

    Characterization of physical and chemical aging of polymeric solar materials by mechanical testing

    Kahlen, S., Jerabek, M., Wallner, G. & Lang, R., 2010, In: Polymer Testing. p. 72-81

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Strain determination of polymeric materials using digital image correlation

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 407-416

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Uniaxial compression testing of polymeric materials

    Jerabek, M., Major, Z. & Lang, R., 2010, In: Polymer Testing. p. 302-309

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2009
  62. Published

    Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use

    Frank, A., Pinter, G. & Lang, R., 2009, In: Polymer Testing. 49, p. 737-745

    Research output: Contribution to journal › Article › Research › peer-review

  63. 2008
  64. Published

    Fracture analysis of annealed PVDF films

    Wallner, G., Major, Z., Maier, G. & Lang, R., 2008, In: Polymer Testing. 27, p. 392-402

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2007
  66. Published

    Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades

    Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, In: Polymer Testing. 26, p. 180-188

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test

    Pinter, G., Haager, M. & Lang, R. W., 2007, In: Polymer Testing. p. 700-710

    Research output: Contribution to journal › Article › Research › peer-review

  68. 2006
  69. Published

    Optimization of run parameters of Temperature Rising Elution Fractionation by the aid of a factorial design experiment

    Aust, N., Gahleitner, M., Reichelt, K. & Raninger, B., 2006, In: Polymer Testing. 25, p. 896-903

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations