Metals : open access journal , ‎2075-4701

Journal

ISSNs2075-4701
1 - 50 out of 86Page size: 50

Research output

  1. 2024
  2. Published

    Investigation on the Duration of Action of Mg3N2 as a Grain Refiner for AZ80 Alloy

    Hösele, T., Neunteufl, E. & Li, J., Apr 2024, In: Metals. 14, 4, 485.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Investigating the Origin of Non-Metallic Inclusions in Ti-Stabilized ULC Steels Using Different Tracing Techniques

    Thiele, K., Truschner, C., Walkner, C., Meisel, T. C., Ilie, S., Rössler, R. & Michelic, S. K., 15 Jan 2024, In: Metals : open access journal . 14.2024, 1, 16 p., 103.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    How cracks induced by straining influence the tribological properties of Mo films deposited on polyimide substrates

    Kobierska, E., Cordill, M. J., Franz, R. & Rebelo de Figueiredo, M., 2024, In: Metals : open access journal . 2024, 14, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2023
  6. Published

    Silicon Poisoning and Effects of Tantalum on AlSi Alloys

    Pammer, M., Pölzl, J. & LI, J., 21 Nov 2023, In: Metals. 13.2023, 12, 11 p., 1917.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Gluconic Acid Leaching of Spent Lithium-Ion Batteries as an Environmentally Friendly Approach to Achieve High Leaching Efficiencies in the Recycling of NMC Active Material

    Lerchbammer, R., Gerold, E. & Antrekowitsch, H., 25 Jul 2023, In: Metals : open access journal . 13.2023, 8, 21 p., 1330.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys

    Scheiblehner, D., Antrekowitsch, H., Neuschitzer, D., Wibner, S. & Sprung, A., 21 Jul 2023, In: Metals. 13.2023, 7, 15 p., 1310.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test Rig

    Gschwandl, T. J., Weniger, T. M., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., Jun 2023, In: Metals. 13.2023, 6, 18 p., 1089.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

    Pfeiffer, A., Ernst, D., Zheng, H., Wimmer, G. & Schenk, J., 18 May 2023, In: Metals. 13.2023, 5, 12 p., 978.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    High-Temperature Oxidation of Steel under Linear Flow Rates of Air and Water Vapor: An Experimental Determined Set of Data

    Gaiser, G., Presoly, P. & Bernhard, C., 5 May 2023, In: Metals. 13.2023, 5, 17 p., 892.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effect of Ca and P on the Size and Morphology of Eutectic Mg2Si in High-Purity Al-Mg-Si Alloys

    Zarif, M. Z., Spacil, I., Pabel, T., Schumacher, P. & LI, J., 17 Apr 2023, In: Metals : open access journal . 13.2023, 4, 16 p., 784.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Evaluation of the Influence Exerted by Increased Silicon Contents on the Leaching Behavior of NMC-Based Black Mass

    Gerold, E., Lerchbammer, R. & Antrekowitsch, H., 17 Apr 2023, In: Metals : open access journal . 13.2023, 4, 15 p., 785.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    In-Situ Observation of Steel/Slag/Inclusion Interaction by Means of High-Temperature Confocal Scanning Laser Microscopy

    Cejka, J. & Michelic, S. K., 30 Mar 2023, In: Metals. 13.2023, 4, 11 p., 686.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Preparation of Micro-Electrolytic Iron-Carbon Filler for Sewage by Recycling Metallurgical Dust

    Xu, R., Zhang, Y., Huang, X., Cao, M., Yu, J., Zhang, J., Zheng, H. & Schenk, J., 29 Mar 2023, In: Metals. 13.2023, 4, 16 p., 673.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Two-Phase Flow Coordination Characteristics of H62 Brass Alloy Prepared by Up-Drawing Continuous Casting

    Li, B., Fu, Q., Yu, R., Lin, Z., Wang, J., Wang, X., Guan, R. & LI, J., 15 Mar 2023, In: Metals : open access journal . 13.2023, 3, 12 p., 599.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction Process

    Ernst, D., Manzoor, U., Souza Filho, I. R., Zarl, M. A. & Schenk, J., 10 Mar 2023, In: Metals. 13.2023, 3, 18 p., 558.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Kharicha, A., 21 Feb 2023, In: Metals : open access journal . 13.2023, 3, 21 p., 444.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Parameter Optimization for Hydrogen-Induced Fluidized Bed Reduction of Magnetite Iron Ore Fines

    Zheng, H., Schenk, J., Daghagheleh, O. & Taferner, B., 8 Feb 2023, In: Metals. 13.2023, 2, 10 p., 339.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Modification of the Cu/W interface cohesion by segregation

    Bodlos, R., Scheiber, D., Spitaler, J. & Romaner, L., 2023, In: Metals : open access journal . 13.2023, 2, 16 p., 346.

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2022
  23. Published

    Simplified Damage Assessment Tool for Rails and Crossings Based on Standard Wear and RCF Models

    Schnalzger, G., Daves, W., Maierhofer, J., Ossberger, U., Ossberger, H., Bucher, C. & Pletz, M., 16 Dec 2022, In: Metals. 12.2022, 12, 20 p., 2169.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Laser powder bed fusion of intermetallic titanium aluminide alloys using a novel process chamber heating system: A study on feasibility and microstructural optimization for creep performance

    Wartbichler, R., Maiwald-Immer, T., Pürstl, F. & Clemens, H., 5 Dec 2022, In: Metals : open access journal . 12.2022, 12, 23 p., 2087.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A Comprehensive Review of Secondary Carbon Bio-Carriers for Application in Metallurgical Processes: Utilization of Torrefied Biomass in Steel Production

    Kieush, L., Rieger, J., Schenk, J., Brondi, C., Rovelli, D., Echterhof, T., Cirilli, F., Thaler, C. M., Jaeger, N., Snaet, D., Peters, K. & Colla, V., 23 Nov 2022, In: Metals. 12.2022, 12, 38 p., 2005.

    Research output: Contribution to journal › Review article › peer-review

  26. Published

    Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering

    Musi, M., Deshayes, C., Molénat, G., Toualbi, L., Galy, B., Spörk-Erdely, P., Hantcherli, M., Monchoux, J-P., Thomas, M., Clemens, H. & Couret, A., 8 Nov 2022, In: Metals : open access journal . 12.2022, 11, 22 p., 1915.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures

    Zhu, Q., Chen, P., Xiao, Q., Li, F., Yi, J., Prashanth, K. G. & Eckert, J., 27 Oct 2022, In: Metals. 12.2022, 11, 13 p., 1824.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Parameter Study on the Recycling of LFP Cathode Material Using Hydrometallurgical Methods

    Gerold, E., Antrekowitsch, H. & Lerchbammer, R., 12 Oct 2022, In: Metals : open access journal . 12.2022, 10, 17 p., 1706.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Optimization of a Pyrometallurgical Process to Efficiently Recover Valuable Metals from Commercially Used Lithium-Ion Battery Cathode Materials LCO, NCA, NMC622, and LFP

    Holzer, A., Wiszniewski, L., Windisch-Kern, S. & Raupenstrauch, H., 29 Sept 2022, In: Metals. 12.2022, 10, 24 p., 1642.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    On the Transferability of Fatigue and Cyclic Deformation Data to 100 µm Thin Structures

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 15 Sept 2022, In: Metals. 12.2022, 9, 22 p., 1524.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Valorizing Steelworks Gases by Coupling Novel Methane and Methanol Synthesis Reactors with an Economic Hybrid Model Predictive Controller

    Hauser, A., Wolf-Zöllner, P., Haag, S., Dettori, S., Tang, X., Mighani, M., Matino, I., Mocci, C., Colla, V., Kolb, S., Bampaou, M., Panopoulos, K., Kieberger, N., Rechberger, K. & Karl, J., 16 Jun 2022, In: Metals. 12.2022, 6, 31 p., 1023.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    70 Years of LD‐Steelmaking—Quo Vadis?

    Cappel, J., Ahrenhold, F., Egger, M. W., Hiebler, H. & Schenk, J., 26 May 2022, In: Metals. 12.2022, 6, 24 p., 912.

    Research output: Contribution to journal › Review article › peer-review

  33. Published

    Microstructure Evolution of a New Precipitation-Strengthened Fe–Al–Ni–Ti Alloy down to Atomic Scale

    Godor, F. R., Palm, M., Liebscher, C., Stein, F., Turk, C., Leitner, K., Rashkova, B. & Clemens, H., 26 May 2022, In: Metals : open access journal . 12.2022, 6, 16 p., 906.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Fatigue Assessment of Wire and Arc Additively Manufactured Ti-6Al-4V

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 4 May 2022, In: Metals. 12.2022, 5, 17 p., 795.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach

    Oberreiter, M., Fladischer, S., Stoschka, M. & Leitner, M., 30 Apr 2022, In: Metals. 12.2022, 5, 22 p., 784.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718

    Gruber, C., Raninger, P., Maierhofer, J., Gänser, H. P., Stanojevic, A., Hohenwarter, A. & Pippan, R., 21 Apr 2022, In: Metals. 12.2022, 5, 14 p., 710.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Cooling rate controlled aging of a Co-Free Fe-Ni-Cr-Mo-Ti-Al maraging steel

    Zeisl, S. & Schnitzer, R., 22 Mar 2022, In: Metals : open access journal . 12.2022, 4, 12 p., 538.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Image Processing Procedure to Evaluate Inclusion Dissolution in a Slag Observed by High-Temperature Confocal Scanning Laser Microscopy

    Ramesh Babu, S., Preißer, N. & Michelic, S. K., 22 Mar 2022, In: Metals : open access journal . 12.2022, 4, 12 p., 531.

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2021
  40. Published

    Investigation of Potential Recovery Rates of Nickel, Manganese, Cobalt, and Particularly Lithium from NMC-Type Cathode Materials (LiNixMnyCozO2) by Carbo-Thermal Reduction in an Inductively Heated Carbon Bed Reactor

    Windisch-Kern, S., Holzer, A., Wiszniewski, L. & Raupenstrauch, H., 17 Nov 2021, In: Metals : open access journal . 2021, 11, 17 p., 1844.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Corrosion of N10276 in a H2S, HCl, and CO2 Containing Atmosphere at 480 °C and 680 °C

    Nimmervoll, M., Mori, G. K., Bucher, E., Schmid, A. & Haubner, R., 12 Nov 2021, In: Metals. 11.2021, 11, 13 p., 1817.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Mechanical Behavior and In Vitro Corrosion of Cubic Scaffolds of Pure Magnesium Processed by Severe Plastic Deformation

    Silva, C. L. P., Camara, M. A., Hohenwarter, A. & Figueiredo, R. B., 8 Nov 2021, In: Metals. 11.2021, 11, 11 p., 1791.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Algorithmic Modelling of Advanced Chlorination Procedures for Multimetal Recovery

    Höber, L., Lerche, R. & Steinlechner, S., 8 Oct 2021, In: Metals. 11, 10, 11 p., 1595.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Toward a Simplified Arc Impingement Model in a Direct-Current Electric Arc Furnace

    Al-Nasser, M., Kharicha, A., Barati, H., Pichler, C., Hackl, G., Gruber, M., Ishmurzin, A., Redl, C., Wu, M. & Ludwig, A., 17 Sept 2021, In: Metals. 11.2021, 9, 17 p., 1482.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Bohacek, J., 31 Aug 2021, In: Metals. 11.2021, 9, 20 p., 1375.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Experimental determination of the MnO activity coefficient in high-manganese slags using the chemical equilibrium method

    Cheremisina, E., Gao, X., Ueda, S., Kitamura, S. Y., Yamashina, R. & Schenk, J., 26 Jul 2021, (E-pub ahead of print) In: Metals. 11.2021, 8, 13 p., 1190.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Separation and Efficient Recovery of Lithium from Spent Lithium-Ion Batteries

    Gerold, E., Luidold, S. & Antrekowitsch, H., 8 Jul 2021, In: Metals : open access journal . 11.2021, 7, 14 p., 1091.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Studies on the Formation and Processing of Aluminium Dross with Particular Focus on Special Metals

    Wibner, S., Antrekowitsch, H. & Meisel, T. C., Jul 2021, In: Metals. 11.2021, 7, 12 p., 1108.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of the cooling time on the microstructural evolution and mechanical performance of a double pulse resistance spot welded Medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 5 Feb 2021, In: Metals : open access journal . 11.2021, 2, p. 1-11 11 p., 270.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    A Novel Pyrometallurgical Recycling Process for Lithium-IonBatteries and Its Application to the Recycling of LCO and LFP

    Holzer, A., Windisch-Kern, S., Ponak, C. & Raupenstrauch, H., 14 Jan 2021, In: Metals : open access journal . 11, 1, p. 1-22 22 p., 149.

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2020
  52. Published

    Diffusion Bonding of High-Alloyed Tool Steels with Maraging and Precipitation Hardening Steels

    Göbl, M., Eder, H., Prestl, A., Siller, I. & Schnitzer, R., 2 Dec 2020, In: Metals : open access journal . 10, 12, p. 1-11 11 p., 1622.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Cathodic and Anodic Stress Corrosion Cracking of a New High-Strength CrNiMnMoN Austenitic Stainless Steel

    Truschner, M., Deutsch, J., Mori, G. K. & Keplinger, A., 19 Nov 2020, In: Metals : open access journal . 10.2020, 11, 12 p., 1541.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Selective Precipitation of Metal Oxalates from Lithium Ion Battery Leach Solutions

    Gerold, E., Luidold, S. & Antrekowitsch, H., 29 Oct 2020, In: Metals : open access journal . 10.2020, 11, p. 1-15 15 p., 1435.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    A study on the stability fields of arc plasma in the hpsr process

    Zarl, M. A., Farkas, M. A. & Schenk, J., Oct 2020, In: Metals. 10.2020, 10, p. 1-22 22 p., 1394.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations