Materials science and engineering: A, Structural materials: properties, microstructure and processing, ‎0921-5093

Journal

ISSNs0921-5093
Additional searchable ISSN (electronic)1873-4936
151 - 179 out of 179Page size: 50

Research output

  1. 2005
  2. Published

    Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model

    Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 79-84

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Microstructure transition from lamellar to compacted graphite using different modification agents

    Geier, G. F., Bauer, W., Mckay, B. & Schumacher, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 339-345

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Nanoscaled structure of a Cu-Fe composite processed by high-pressure torsion

    Sauvage, X. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 345-347

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Strain hardening during high pressure torsion deformation

    Wetscher, F., Vorhauer, A. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 213-216

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Stress/Strain Behaviour and Fatigue Limit of Grey Cast Iron

    Willidal, T., Bauer, W. & Schumacher, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 578-582

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations

    Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

    Sabirov, I., Duschlbauer, D., Pettermann, H. E. & Kolednik, O., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 393, p. 275-285

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2004
  12. Published

    Amorphization of Ni60Nb20Zr20 by mechanical alloying

    Enayati, M. H., Schumacher, P. & Cantor, B., Jul 2004, In: Materials Science and Engineering A. 375-377, 1-2 SPEC. ISS., p. 812-814 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Quantitative determination of the volume fraction of intergranular amorphous phase in sintered silicon nitride

    Roebben, G., Sarbu, C., Lube, T. & Van der Biest, O., 15 Apr 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 370, 1-2, p. 453-458 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape

    Kreuzer, H. G. M. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 254-256

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel

    Schafler, E. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 799-804

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Erratum to "On the experimental characterization of crystal plasticity in polycrystals"

    Tatschl, A. & Kolednik, O., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A 364, p. 384-399

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram

    Ludwig, A. & Leibbrandt, S., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 540-546

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of non-metallic inclusions on the austenite-to-ferrite phase transformation

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 365, p. 291-297

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Non-Equilibrium Globular Microstructure suitable for Semi-Solid Casting of Light Metal Alloys by Rapid-Slug-Cooling-Technology (RSCT

    Ludwig, A., Bührig-Polaczek, A. & Sahm, P., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 651-655

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Structural refinement of low alloyed steels during severe plastic deformation

    Wetscher, F., Vorhauer, A., Stock, R. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 806-816

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2003
  22. Published

    Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

    Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, p. 189-196 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. 2002
  24. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2001
  26. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems

    Ludwig, A. & Pustal, B., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 337-340

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Heterogeneous nucleation in an Al-Ni-Si alloy studied using a metallic galss technique

    McKay, B., Cizek, P. & Schumacher, P., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 240-244

    Research output: Contribution to journal › Article › Research › peer-review

  29. 1997
  30. Published

    Critical shapes and arrangements of carbides in high-speed tool steel

    Antretter, T. & Fischer, F. D., 1 Sept 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, p. 6-11 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    In-Situ Observation of Cellular Growth under Rapid Solidification Conditions

    Ludwig, A. & Sahm, P., 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 124-128

    Research output: Contribution to journal › Article › Research › peer-review

  32. 1994
  33. Published

    Undercooling of Superalloy Melts: Basis of a New Manufacturing Technique for Single-Crystal Turbine Blades

    Ludwig, A. & Sahm, P., 1994, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  34. 1991
  35. Published

    Heat Transfer in the Single Roller Quenching Methods

    Ludwig, A., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 751-754

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Modeling of Dendritic Growth During the Ribbon Formation in Planar Flow Casting

    Ludwig, A. & Frommeyer, G., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 722-725

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Solid-Liquid Interfacial Free Energy

    Ludwig, A., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 577-580

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations