Materials science and engineering: A, Structural materials: properties, microstructure and processing, 0921-5093
Journal
ISSNs | 0921-5093 |
---|---|
Additional searchable ISSN (electronic) | 1873-4936 |
Research output
- 2022
- Published
Combined thermal desorption spectroscopy, hydrogen visualization, HRTEM and EBSD investigation of a Ni–Fe–Cr alloy: The role of hydrogen trapping behavior in hydrogen-assisted fracture
Moshtaghi, M., Safyari, M. & Mori, G. K., 19 Jul 2022, In: Materials Science and Engineering A. 848.2022, 19 July, 10 p., 143428.Research output: Contribution to journal › Article › Research › peer-review
- Published
Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal
Fleißner-Rieger, H., Musi, M., Albu, M., Krein, R. & Schnitzer, R., 5 Jul 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 850.2022, 11 August, 11 p., 143550.Research output: Contribution to journal › Article › Research › peer-review
- Published
Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites
Wu, Y., Liu, B., Kang, H., Guo, E., LI, J., Du, G. & Wang, T., 18 Apr 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 840.2022, 18 April, 9 p., 142958.Research output: Contribution to journal › Article › Research › peer-review
- Published
The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungsten
Firneis, D., Wurster, S., Nikolić, V., Pippan, R. & Hohenwarter, A., 24 Mar 2022, In: Materials Science and Engineering A. 838.2022, 24 March, 8 p., 142756.Research output: Contribution to journal › Article › Research › peer-review
- Published
Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation
Zeisl, S., Lassnig, A., Hohenwarter, A. & Mendez Martin, F., 26 Jan 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 833.2022, 26 January, 9 p., 142416.Research output: Contribution to journal › Article › Research › peer-review
- 2021
- E-pub ahead of print
Development of segregations in a Mg–Mn–Nd alloy during HPT processing
de Oliveira, P. C., Montoro, L. A., Perez-Prado, M. T., Hohenwarter, A., Figueiredo, R. B. & Isaac, A., 23 Oct 2021, (E-pub ahead of print) In: Materials Science and Engineering A. 802.2021, 20 January, 140423.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites
Akbaripanah, F., Sabbaghian, M., Fakhar, N., Khaleghi, A. A., Minárik, P., Veselý, J., Hung, P. T., Kapoor, G., Renk, O., Máthis, K., Gubicza, J. & Eckert, J., 20 Aug 2021, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 826.2021, 5 October, 11 p., 141916.Research output: Contribution to journal › Article › Research › peer-review
- Published
Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels
Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure and mechanical properties of partially ferritic Q&P steels
Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 20 May 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 815.2021, 20 May, 11 p., 141296.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of cold rolling on the fatigue crack growth behavior of tungsten
Pillmeier, S., Žák, S., Pippan, R. & Hohenwarter, A., 23 Feb 2021, In: Materials Science and Engineering A. 805.2021, 23 February, 12 p., 140791.Research output: Contribution to journal › Article › Research › peer-review
- Published
High pressure torsion processing of maraging steel 250: Microstructure and mechanical behaviour evolution
Jacob, K., Yadav, D., Dixit, S., Hohenwarter, A. & Jaya, B. N., 20 Jan 2021, In: Materials Science and Engineering A. 802.2021, 20 January, 13 p., 140665.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels
Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 20 Jan 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 802.2021, 20 January, 11 p., 140672.Research output: Contribution to journal › Article › Research › peer-review
- 2020
- Published
Mechanism of low temperature deformation in aluminium alloys
Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 23 Sept 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 795, 795, 11 p., 139935.Research output: Contribution to journal › Article › Research › peer-review
- Published
Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution
Xu, Z. Y., Li, C. J., Wang, Z., Fang, D., Gao, P., Tao, J. M., Yi, J. H. & Eckert, J., 20 Aug 2020, In: Materials Science and Engineering A. 796.2020, 7 October, 7 p., 140067.Research output: Contribution to journal › Article › Research › peer-review
- Published
Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering
Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 5 Aug 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 792.2020, 5 August, 11 p., 139798.Research output: Contribution to journal › Article › Research › peer-review
- Published
Environmental hydrogen embrittlement associated with decohesion and void formation at soluble coarse particles in a cold-rolled Al–Cu based alloy
Safyari, M., Moshtaghi, M. & Kuramoto, S., 9 Jul 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 799.2022, 2 January, 12 p., 139850.Research output: Contribution to journal › Article › Research › peer-review
- Published
Strain aging characterization and physical modelling of over-aging in dual phase steel
Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 24 Jun 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 788.2020, 24 June, 13 p., 139595.Research output: Contribution to journal › Article › Research › peer-review
- Published
Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment
Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.Research output: Contribution to journal › Article › Research › peer-review
- Published
Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel
Yan, Z., Liu, K. & Eckert, J., 6 May 2020, In: Materials Science and Engineering A. 787.2020, 10 June, 8 p., 139520.Research output: Contribution to journal › Article › Research › peer-review
- Published
Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy
Zhang, T., Zhao, R. D., Wu, F. F., Lin, S. B., Jiang, S. S., Huang, Y. J., Chen, S. H. & Eckert, J., 7 Apr 2020, In: Materials Science and Engineering A. 780.2020, 7 April, 7 p., 139182.Research output: Contribution to journal › Article › Research › peer-review