Materials science and engineering: A, Structural materials: properties, microstructure and processing, ‎0921-5093

Journal

ISSNs0921-5093
Additional searchable ISSN (electronic)1873-4936
1 - 50 out of 179Page size: 50

Research output

  1. 2024
  2. E-pub ahead of print

    Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloying

    Moravcik, I., Alfreider, M., Wurster, S., Schretter, L., Zadera, A., Pernica, V., Čamek, L., Eckert, J. & Hohenwarter, A., 27 Dec 2024, (E-pub ahead of print) In: Materials Science and Engineering: A. 924.2025, February, 14 p., 147757.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Microstructure evolution and mechanical properties of a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy processed by high-pressure torsion

    Zhang, Z., Fellner, S., Hohenwarter, A., Renk, O., Huang, Y., Chen, Z., Song, K., Li, C., Gammer, C. & Eckert, J., 23 Aug 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 914.2024, November, 12 p., 147139.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process

    Schimbäck, D., Kaserer, L., Mair, P., Mohebbi, M. S., Staron, P., Maier-Kiener, V., Letofsky-Papst, I., Kremmer, T., Palm, F., Montes, I., Höppel, H. W., Leichtfried, G. J. & Pogatscher, S., Jul 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 905.2024, July, 10 p., 146102.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Influence of deformation, microstructure, and temperature on the fracture resistance of technically pure tungsten

    Gludovatz, B., Wurster, S., Hohenwarter, A., Hoffmann, A. & Pippan, R., 11 May 2024, In: Materials Science and Engineering: A. 902.2024, June, 11 p., 146631.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Microscopic fracture toughness of notched porous sintered Cu micro-cantilevers for power electronics packaging

    Hu, D., Du, L., Alfreider, M., Fan, J., Kiener, D. & Zhang, G., 7 Apr 2024, In: Materials Science and Engineering: A. 897.2024, April, 10 p., 146316.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel

    Rosenauer, A., Teusl, S., Landefeld, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Maawad, E., Stockinger, M. & Schnitzer, R., Mar 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 895.2024, March, 13 p., 146220.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2023
  10. Published

    Deformation and failure behavior of nanocrystalline WCu

    Burtscher, M., Alfreider, M., Kainz, C. & Kiener, D., 6 Nov 2023, In: Materials Science and Engineering A. 887.2023, 6 November, 9 p., 145760.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    In-situ microscopy methods for imaging high-temperature microstructural processes – Exploring the differences and gaining new potentials

    Lumper, L., Schaffar, G. J. K., Sommerauer, M. & Maier-Kiener, V., 6 Nov 2023, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 887.2023, 6 November, 9 p., 145738.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Decoupling electroplasticity by temporal coordination design of pulse current loading and straining

    Li, H., Jin, F., Zhang, M., Ding, J., Bian, T., LI, J., Ma, J., Zhang, L. & Wang, Y., 10 Jul 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 881.2023, 10 August, 17 p., 145435.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy

    Picak, S., Singh, P., Salas, D., Fang, X., Tunes, M., Zhou, L., Kramer, M. J., Chumlyakov, Y. I., Johnson, D. D., Arróyave, R., Ren, Y. & Karaman, I., 22 Jun 2023, (E-pub ahead of print) In: Materials Science and Engineering: A. 888.2023, 17 November, 11 p., 145309.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloy

    Pillmeier, S., Pippan, R., Eckert, J. & Hohenwarter, A., 4 Mar 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 871.2023, 26 April, 12 p., 144868.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Effect of integrated austempering and Q&P treatment on the transformation kinetics, microstructure and mechanical properties of a medium-carbon steel

    Liu, M., Hu, H., Kern, M., Lederhaas, B., Xu, G. & Bernhard, C., 15 Feb 2023, (E-pub ahead of print) In: Materials Science and Engineering A. 869.2023, 24 March, 12 p., 144780.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2022
  17. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness

    Gu, Z., Zhou, Y., Dong, Q., He, G., Cui, J., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 10 p., 143901.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Enhancement in strength and thermal stability of selective laser melted Al–12Si by introducing titanium nanoparticles

    Qi, J., Liu, C. Y., Chen, Z. W., Liu, Z. Y., Tian, J. S., Feng, J., Okulov, I. V., Eckert, J. & Wang, P., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 12 p., 143833.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy

    Papenberg, N. P., Arnoldt, A., Trink, B., Uggowitzer, P. & Pogatscher, S., 23 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2022, 857, 22 p., 144079.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Monschein, S., Stockinger, M. & Schnitzer, R., 19 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 11 p., 144024.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Elucidating dynamic precipitation and yield strength of rolled Mg-Al-Ca-Mn alloy

    LI, J., Zhou, X., Su, J., Breitbach, B., Chwałek, M. L., Wang, H. & Dehm, G., 14 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 17 p., 143898.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Combined thermal desorption spectroscopy, hydrogen visualization, HRTEM and EBSD investigation of a Ni–Fe–Cr alloy: The role of hydrogen trapping behavior in hydrogen-assisted fracture

    Moshtaghi, M., Safyari, M. & Mori, G. K., 19 Jul 2022, In: Materials Science and Engineering A. 848.2022, 19 July, 10 p., 143428.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal

    Fleißner-Rieger, H., Musi, M., Albu, M., Krein, R. & Schnitzer, R., 5 Jul 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 850.2022, 11 August, 11 p., 143550.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites

    Wu, Y., Liu, B., Kang, H., Guo, E., LI, J., Du, G. & Wang, T., 18 Apr 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 840.2022, 18 April, 9 p., 142958.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungsten

    Firneis, D., Wurster, S., Nikolić, V., Pippan, R. & Hohenwarter, A., 24 Mar 2022, In: Materials Science and Engineering A. 838.2022, 24 March, 8 p., 142756.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation

    Zeisl, S., Lassnig, A., Hohenwarter, A. & Mendez Martin, F., 26 Jan 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 833.2022, 26 January, 9 p., 142416.

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2021
  30. E-pub ahead of print

    Development of segregations in a Mg–Mn–Nd alloy during HPT processing

    de Oliveira, P. C., Montoro, L. A., Perez-Prado, M. T., Hohenwarter, A., Figueiredo, R. B. & Isaac, A., 23 Oct 2021, (E-pub ahead of print) In: Materials Science and Engineering A. 802.2021, 20 January, 140423.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites

    Akbaripanah, F., Sabbaghian, M., Fakhar, N., Khaleghi, A. A., Minárik, P., Veselý, J., Hung, P. T., Kapoor, G., Renk, O., Máthis, K., Gubicza, J. & Eckert, J., 20 Aug 2021, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 826.2021, 5 October, 11 p., 141916.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 20 May 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 815.2021, 20 May, 11 p., 141296.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of cold rolling on the fatigue crack growth behavior of tungsten

    Pillmeier, S., Žák, S., Pippan, R. & Hohenwarter, A., 23 Feb 2021, In: Materials Science and Engineering A. 805.2021, 23 February, 12 p., 140791.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    High pressure torsion processing of maraging steel 250: Microstructure and mechanical behaviour evolution

    Jacob, K., Yadav, D., Dixit, S., Hohenwarter, A. & Jaya, B. N., 20 Jan 2021, In: Materials Science and Engineering A. 802.2021, 20 January, 13 p., 140665.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 20 Jan 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 802.2021, 20 January, 11 p., 140672.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2020
  38. Published

    Mechanism of low temperature deformation in aluminium alloys

    Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 23 Sept 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 795, 795, 11 p., 139935.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution

    Xu, Z. Y., Li, C. J., Wang, Z., Fang, D., Gao, P., Tao, J. M., Yi, J. H. & Eckert, J., 20 Aug 2020, In: Materials Science and Engineering A. 796.2020, 7 October, 7 p., 140067.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

    Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 5 Aug 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 792.2020, 5 August, 11 p., 139798.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Environmental hydrogen embrittlement associated with decohesion and void formation at soluble coarse particles in a cold-rolled Al–Cu based alloy

    Safyari, M., Moshtaghi, M. & Kuramoto, S., 9 Jul 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 799.2022, 2 January, 12 p., 139850.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Strain aging characterization and physical modelling of over-aging in dual phase steel

    Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 24 Jun 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 788.2020, 24 June, 13 p., 139595.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

    Yan, Z., Liu, K. & Eckert, J., 6 May 2020, In: Materials Science and Engineering A. 787.2020, 10 June, 8 p., 139520.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy

    Zhang, T., Zhao, R. D., Wu, F. F., Lin, S. B., Jiang, S. S., Huang, Y. J., Chen, S. H. & Eckert, J., 7 Apr 2020, In: Materials Science and Engineering A. 780.2020, 7 April, 7 p., 139182.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

    Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, In: Materials Science and Engineering A. 773.2020, 31 January, 9 p., 138848.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

    Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J., 13 Jan 2020, In: Materials Science and Engineering A. 771.2020, 13 January, 5 p., 138630.

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2019
  49. Published

    On the mean stress sensitivity of cast aluminium considering imperfections

    Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, p. 172-184 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Controlling the distribution of structural heterogeneities in severely deformed metallic glass

    Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In: Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion

    Wallis, C. & Buchmayr, B., 28 Jan 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 215-223 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

    Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 28 Jan 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility

    Schuh, B., Pippan, R. & Hohenwarter, A., 25 Jan 2019, In: Materials Science and Engineering A. 748.2019, 4 March, p. 379-385 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

    Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, p. 73-79

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy

    LI, J., An, Z., Hage, F. S., Wang, H. Y., Xie, P., Jin, S., Ramasse, Q. M. & Sha, G., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760.2019, 8 July, p. 366-376 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations