Materials, ‎1996-1944

Journal

ISSNs1996-1944
Additional searchable ISSN (electronic)1996-1944
1 - 100 out of 112Page size: 100

Research output

  1. 2024
  2. Published

    A Study on Ammonium Chloride Dendrite Tip Kinetics: The Importance of the Solid–Liquid Density Change and Interfacial Kinetics

    Alrasheedi, N., Stefan-Kharicha, M., Sari, I., Ahmadein, M. & Kharicha, A., 6 Jun 2024, In: Materials. 17.2024, 11, 11 p., 2768.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

    Cazin, I., Ocepek, M., Kecelj, J., Stražar, A. S. & Schlögl, S., 19 Apr 2024, In: Materials. 17.2024, 8, 13 p., 1890.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    The Impact of Marangoni and Buoyancy Convections on Flow and Segregation Patterns during the Solidification of Fe-0.82wt%C Steel

    Sari, I., Wu, M., Ahmadein, M., Ataya, S., Alrasheedi, N. & Kharicha, A., 5 Mar 2024, In: Materials. 17.2024, 5, 16 p., 1205.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Modeling Dendrite Coarsening and Remelting during Directional Solidification of Al-06wt.%Cu Alloy

    Sari, I., Alrasheedi, N., Ahmadein, M., Djuansjah, J., Hachani, L., Zaidat, K., Wu, M. & Kharicha, A., 16 Feb 2024, In: Materials. 17.2024, 4, 12 p., 912.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate

    Sari, I., Ahmadein, M., Ataya, S., Hachani, L., Zaidat, K., Alrasheedi, N., Wu, M. & Kharicha, A., 13 Feb 2024, In: Materials. 17.2024, 4, 15 p., 865.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2023
  8. Published

    Radionuclide removal from aqueous solutions using oxidized carbon fabrics

    Ioannidis, I., Pashalidis, I., Mulla, B., Kotanidis, G., Ioannou, K., Constantinides, G., Kostoglou, N. & Rebholz, C., 2 Dec 2023, In: Materials. 16.2023, 23, 16 p., 7479.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    In Situ Observation of Micro-Patterned Elastomeric Surfaces: The Formation of the Area of Real Contact and the Influence on Its Friction and Deformation Behaviour

    Hausberger, A., Pecora, M., Favier, D., Rossegger, E., Tockner, M., Ules, T., Haselmann, M., Schlögl, S. & Gauthier, C., 29 Sept 2023, In: Materials. 16.2023, 19, 17 p., 6489.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Low-Cycle Fatigue Behavior of Wire and Arc Additively Manufactured Ti-6Al-4V Material

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 5 Sept 2023, In: Materials. 16.2023, 18, 21 p., 6083.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    On the Change in Hydrogen Diffusion and Trapping Behaviour of Pearlitic Rail Steel at Different Stages of Production

    Eichinger, M., Loder, B., Tkadletz, M., Schnideritsch, H., Klösch, G. & Mori, G. K., 23 Aug 2023, In: Materials. 16.2023, 17, 15 p., 5780.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Machine learning mechanical properties of steel sheets from an industrial production route

    Millner, G., Mücke, M., Romaner, L. & Scheiber, D., Aug 2023, In: Materials. 30.2023, August, 11 p., 101810.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of Surface Finishing State on Fatigue Strength of Cast Aluminium and Steel Alloys

    Oberreiter, M., Horvath, M., Stoschka, M. & Fladischer, S., 30 Jun 2023, In: Materials. 16.2023, 13, 41 p., 4755.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses: In Vitro Evaluation and Finite Element Analysis

    Malgaj, T., Papšík, R., Abram, A., Kocjan, A. & Jevnikar, P., 27 Mar 2023, In: Materials. 16, 7, 15 p., 2646.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 23 Mar 2023, In: Materials. 16.2023, 7, 17 p., 2568.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

    Antoni, M., Spieckermann, F., Plutta, N., Gammer, C., Kapp, M., Ramasamy, P., Polak, C., Pippan, R., Zehetbauer, M. J. & Eckert, J., 1 Feb 2023, In: Materials. 16.2023, 3, 14 p., 1260.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering

    Honaramooz, M., Morak, R., Pogatscher, S., Popovski, G., Kremmer, T., Meisel, T., Österreicher, J. A., Arnoldt, A. & Paris, O., 31 Jan 2023, In: Materials. 16.2023, 3, 13 p., 1213.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  19. 2022
  20. Published

    Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi

    Chulist, R., Pukenas, A., Chekhonin, P., Hohenwarter, A., Pippan, R., Schell, N. & Skrotzki, W., 25 Nov 2022, In: Materials. 2022, 15, 18 p., 8407.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Discrete Element Modelling of Cold Crushing Tests Considering Various Interface Property Distributions in Ordinary Refractory Ceramics

    Du, W. & Jin, S., 31 Oct 2022, In: Materials. 15.2022, 21, 18 p., 7650.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6

    Slapnik, J., Liu, Y., Kupfer, R., Lucyshyn, T., Nardin, B. & Pinter, G., 23 Sept 2022, In: Materials. 15.2022, 19, 14 p., 6600.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Investigations on the Interaction Behavior between Direct Reduced Iron and Various Melts

    Pfeiffer, A., Wimmer, G. & Schenk, J., 18 Aug 2022, In: Materials. 15.2022, 16, 14 p., 5691.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A New Methodological Approach to the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 1: Method

    Zarl, M. A., Ernst, D., Cejka, J. & Schenk, J., 7 Jul 2022, In: Materials. 15.2022, 14, 23 p., 4767.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    A New Methodological Approach on the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 2: Results

    Ernst, D., Zarl, M. A., Cejka, J. & Schenk, J., 8 Jun 2022, In: Materials. 15.2022, 12, 22 p., 4065.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Using Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Mathematical Evaluation

    Wolfinger, T., Spreitzer, D. & Schenk, J., 1 Jun 2022, In: Materials. 15.2022, 11, 17 p., 3943.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Fatigue Analysis and Defect Size Evaluation of Filled NBR including Temperature Influence

    Schieppati, J., Schrittesser, B., Tagliabue, S., Andena, L., Holzner, A., Poduška, J. & Pinter, G. G., 24 May 2022, In: Materials. 15.2022, 11, 23 p., 3745.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Analysis of Non-Metallic Inclusions by Means of Chemical and Electrolytic Extraction—A Review

    Ramesh Babu, S. & Michelic, S. K., 7 May 2022, In: Materials. 15.2022, 9, 25 p., 3367.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Peeling of Flexible Laminates—Determination of Interlayer Adhesion of Backsheet Laminates Used for Photovoltaic Modules

    Oreski, G. & Pinter, G., 4 May 2022, In: Materials. 15.2022, 9, 11 p., 3294.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials

    Pletz, M. & Arbeiter, F. J., 3 May 2022, In: Materials. 15.2022, 9, 13 p., 3273.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Analysis of the Usability of Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Review

    Wolfinger, T., Spreitzer, D. & Schenk, J., 6 Apr 2022, In: Materials. 15.2022, 7, 15 p., 2687.

    Research output: Contribution to journal › Review article › peer-review

  33. Published

    Relaxation and Strain-Hardening Relationships in Highly Rejuvenated Metallic Glasses

    Yuan, X., Şopu, D., Song, K. & Eckert, J., 24 Feb 2022, In: Materials. 15.2022, 5, 10 p., 1702.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Microstructural, chemical, and crystallographic investigations of dynamic strain‐induced ferrite in a microalloyed QT steel

    Monschein, S., Ragger, K., Fasching, J., Zügner, D. & Schnitzer, R., 10 Feb 2022, In: Materials. 12.2022, 2, 14 p., 313.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Metallurgical Coke Production with Biomass Additives: Study of Biocoke Properties for Blast Furnace and Submerged Arc Furnace Purposes

    Bazaluk, O., Kieush, L., Koveria, A., Schenk, J., Pfeiffer, A., Zheng, H. & Lozynskyi, V., 1 Feb 2022, In: Materials. 15.2022, 3, 17 p., 1147.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Optimization of the post-process heat treatment strategy for a Near-α Titanium base alloy produced by laser powder bed fusion

    Fleißner-Rieger, C., Pfeifer, T., Turk, C. & Clemens, H., 28 Jan 2022, In: Materials. 15.2022, 3, p. 1-14 14 p., 1032.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Materials Engineering for Flexible Metallic Thin Film Applications

    Cordill, M. J., Kreiml, P. & Mitterer, C., 25 Jan 2022, In: Materials. 15.2022, 3, 25 p., 926.

    Research output: Contribution to journal › Review article › peer-review

  38. Published

    A Comprehensive Review of Characterization Methods for Metallurgical Coke Structures

    Zheng, H., Xu, R., Zhang, J., Daghagheleh, O., Schenk, J., Li, C. & Wang, W., 1 Jan 2022, In: Materials. 15.2022, 1, 24 p., 174.

    Research output: Contribution to journal › Review article › peer-review

  39. 2021
  40. Published

    In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Gąsior, P., Kaleta, J., Anuszkiewicz, A., Bender, M., Schledjewski, R., Mergo, P. & Osuch, T., 31 Dec 2021, In: Materials. 15.2022, 1, 16 p., 77.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Graphene-Reinforced Carbon-Bonded Coarse-Grained Refractories

    Storti, E., Fruhstorfer, J., Luchini, B., Jiříčková, A., Jankovský, O. & Aneziris, C., 27 Dec 2021, In: Materials. 15.2022, 1, 19 p., 186.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5Mg-1Si Alloy Manufactured by Selective Laser Melting

    Wang, P., Lei, Y., Qi, J. F., Yu, S.-J., Setchi, R., Wu, M. W., Eckert, J., Li, H. C. & Scudino, S., 1 Nov 2021, In: Materials. 14.2021, 22, 11 p., 7048.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Structure-Property Relationships of Polyamide 12 Grades Exposed to Rapid Crack Extension

    Messiha, M., Frank, A., Heimink, J., Arbeiter, F. & Pinter, G., 8 Oct 2021, In: Materials. 14.2021, 19, 12 p., 5899.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Liquid Metal Embrittlement of Advanced High Strength Steel: Experiments and damage modeling

    Prabitz, K., Asadzadeh, M. Z., Pichler, M., Antretter, T., Beal, C., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 21 Sept 2021, In: Materials. 14.2021, 18, 15 p., 5451.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Validated multi-physical finite element modelling of the spot welding process of the advanced high strength steel dp1200hd

    Prabitz, K., Pichler, M., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 18 Sept 2021, In: Materials. 14.2021, 18, 19 p., 5411.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Lean Wrought Magnesium Alloys

    Papenberg, N. P., Gneiger, S., Uggowitzer, P. J. & Pogatscher, S., 31 Jul 2021, In: Materials. 14.2021, 15, 30 p., 4282.

    Research output: Contribution to journal › Review article › peer-review

  47. Published

    Microstructure and Local Mechanical Properties of the Heat-Affected Zone of a Resistance Spot Welded Medium-Mn Steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 17 Jun 2021, In: Materials. 14.2021, 12, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Uggowitzer, P. & Pogatscher, S., 15 Jun 2021, In: Materials. 14.2021, 12, 3312.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part I: Evolution of Primary and Secondary Phases

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Kremmer, T., Uggowitzer, P. & Pogatscher, S., 2 Jun 2021, In: Materials. 14.2021, 12, 3204.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Molecular dynamics study of the nanoindentation behavior of cu64zr36/cu amorphous/crystalline nanolaminate composites

    Wu, W. P., Şopu, D. & Eckert, J., 23 May 2021, In: Materials. 14.2021, 11, 12 p., 2756.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Crack Propagation Analysis of Compression Loaded Rolling Elements

    Dlhý, P., Poduska, J., Berer, M., Gosch, A., Slavik, O., Nahlik, L. & Hutař, P., 19 May 2021, In: Materials. 14.2021, 10, 24 p., 2656.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M. & Baldi, F., 13 Apr 2021, In: Materials. 14.2021, 8, 23 p., 1945.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Quantification Approaches for Fatigue Crack Resistance of Thermoplastic Tape Layered Composites with Multiple Delaminations

    Khudiakova, A., Brunner, A. J., Wolfahrt, M. & Pinter, G., 17 Mar 2021, In: Materials. 14.2021, 6, 23 p., 1476.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    A Fast and Implantation-Free Sample Production Method for Large Scale Electron-Transparent Metallic Samples Destined for MEMS-Based In Situ S/TEM Experiments

    Tunes, M. A., Quick, C., Stemper, L., Santa Rosa Coradini, D., Grasserbauer, J., Dumitraschkewitz, P., Kremmer, T. & Pogatscher, S., 26 Feb 2021, In: Materials. 14.2021, 5, p. 1-9 9 p., 1085.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Resins for Frontal Photopolymerization: Combining depth-cure and tunable mechanical properties

    Ebner, C., Mitterer, J., Gonzalez-Gutierrez, J., Rieß, G. & Kern, W., 5 Feb 2021, In: Materials. 14.2021, 4, 10 p., 743.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites

    Wiener, J., Kaineder, H., Kolednik, O. & Arbeiter, F., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-19 19 p., 725.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Thermal Expansion of a Multiphase Intermetallic Ti-Al-Nb-Mo Alloy Studied by High-Energy X-ray Diffraction

    Staron, P., Stark, A., Schell, N., Spörk-Erdely, P. & Clemens, H., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-13 13 p., 727.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Solutions of critical raw materials issues regarding iron-based alloys

    Novák, P., Bellezze, T., Cabibbo, M., Gamsjäger, E., Wießner, M., Rajnovic, D., Jaworska, L., Hanus, P., Shishkin, A., Goel, G. & Goel, S., 2 Feb 2021, In: Materials. 14, 4, p. 1-36 36 p., 899.

    Research output: Contribution to journal › Review article › peer-review

  59. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  60. 2020
  61. Published

    Fracture of Thin-Walled Polyoxymethylene Bulk Specimens in Modes I and III

    Schrader, P., Gosch, A., Berer, M. & Marzi, S., 2 Nov 2020, In: Materials. 13, 22, p. 1-18 18 p., 5096.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    An Advanced TiAl Alloy for High-Performance Racing Applications

    Burtscher, M., Klein, T., Lindemann, J., Lehmann, O., Fellmann, H., Güther, V., Clemens, H. & Mayer, S., 22 Oct 2020, In: Materials. 13.2020, 21, p. 1-14 14 p., 4720.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Selective Laser Melting of Aluminum and Its Alloys

    Wang, Z., Ummethala, R., Singh, N., Tang, S., Suryanarayana, C., Eckert, J. & Prashanth, K. G., 14 Oct 2020, In: Materials. 13.2020, 20, p. 1-67 67 p., 4564.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Addressing H-Material Interaction in Fast Diffusion Materials—A Feasibility Study on a Complex Phase Steel

    Massone, A., Manhard, A., Drexler, A., Posch, C., Ecker, W., Maier-Kiener, V. & Kiener, D., 2 Oct 2020, In: Materials. 13.2020, 20, p. 1-20 20 p., 4677.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Hydrogen Uptake and Embrittlement of Carbon Steels in Various Environments

    Trautmann, A., Mori, G., Oberndorfer, M., Bauer, S., Holzer, C. & Dittmann, C., 14 Aug 2020, In: Materials. 13.2020, 16, 16 p., 3604.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Effect of Polishing on Electrochemical Behavior and Passive Layer Composition of Different Stainless Steels

    Rokosz, K., Solecki, G., Mori, G., Fluch, R., Kapp, M. & Lahtinen, J., 1 Aug 2020, In: Materials. 13.2020, 15, 12 p., 3402.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Microstructural Change during the Interrupted Quenching of the AlZnMg(Cu) Alloy AA7050

    Kremmer, T., Dumitraschkewitz, P., Pöschmann, D., Ebner, T., Uggowitzer, P., Kolb, G. & Pogatscher, S., 4 Jun 2020, In: Materials. 13, 11, 11 p., 2554.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Recent trends in applying ortho-nitrobenzyl esters for the design of photo-responsive polymer networks

    Romano, A., Roppolo, I., Rossegger, E., Schlögl, S. & Sangermano, M., 2 Jun 2020, In: Materials. 13, 12, p. 1-26 26 p., 2777.

    Research output: Contribution to journal › Review article › peer-review

  71. Published

    Elasto-Viscoplastic Material Model of a Directly-Cast Low-Carbon Steel at High Temperatures

    Krobath, M., Krobath, R., Bernhard, C. & Ecker, W., 15 May 2020, In: Materials. 13.2020, 10, 13 p., 2281.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Influence of Fiber Deviation on Strength of Thin Birch (Betula pendula Roth.) Veneers

    Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Kumpenza, C. & Müller, U., 1 Apr 2020, In: Materials. 13.2020, 7, 12 p., 1484.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Soft Ferromagnetic Bulk Metallic Glass with Potential Self-Healing Ability

    Ramasamy, P., Stoica, M., Ababei, G., Lupu, N. & Eckert, J., 14 Mar 2020, In: Materials. 13.2020, 6, 8 p., 1319.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Linear Elastic FE-Analysis of porous, laser welded, heat treatable, aluminium high pressure die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2 Mar 2020, In: Materials. 13, 6, 1420.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Mg-alloys for forging applications-A review

    Papenberg, N. P., Gneiger, S., Weißensteiner, I., Uggowitzer, P. J. & Pogatscher, S., 22 Feb 2020, In: Materials. 13.2020, 4, 61 p., 985.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Investigation of Peritectic Solidification Morphologies by Using the Binary Organic Model System TRIS-NPG

    Mogeritsch, J., Abdi, M. & Ludwig, A., 21 Feb 2020, In: Materials. 13.2020, 4, 16 p., 966.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

    Naseri Seftejani, M., Schenk, J., Spreitzer, D. & Zarl, M. A., 20 Feb 2020, In: Materials. 13.2020, 4, 24 p., 935.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

    Godec, D., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 8 Feb 2020, In: Materials. 13.2020, 3, 23 p., 774.

    Research output: Contribution to journal › Article › Research › peer-review

  79. E-pub ahead of print

    Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys

    Hitzler, L., Hafenstein, S., Mendez Martin, F., Clemens, H., Sert, E., Öchsner, A., Merkel, M. & Werner, E., 5 Feb 2020, (E-pub ahead of print) In: Materials. 13.2020, 3, 17 p., 720.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Ageing behaviour of Al-Mg-Si alloys after cryogenic and room temperature deformation

    Gruber, B., Grabner, F., Fragner, W., Schökel, A., Spieckermann, F., Uggowitzer, P. & Pogatscher, S., 1 Feb 2020, In: Materials. 13, 3, 554.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Evolution of microstructure and texture in laboratory- and industrial-scaled production of automotive Al-sheets

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Mitsche, S., Uggowitzer, P. & Pogatscher, S., 19 Jan 2020, In: Materials. 13.2020, 2, 469.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Model-Based Residual Stress Design in Multiphase Seamless Steel Tubes

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 16 Jan 2020, In: Materials. 13.2020, 2, 12 p., 439.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Molecular Coverage Determines Sliding Wear Behavior of n-Octadecylphosphonic Acid Functionalized Cu–O Coated Steel Disks against Aluminum

    Prünte, S., Music, D., Terziyska, V., Mitterer, C. & Schneider, J. M., 1 Jan 2020, In: Materials. 13.2020, 2, 10 p., 280.

    Research output: Contribution to journal › Article › Research › peer-review

  84. 2019
  85. Published

    Activation and Repassivation of Stainless Steels in Artificial Brines as a Function of pH

    Mujanovic, E., Zajec, B., Kosec, T., Legat, A., Hönig, S., Zehethofer, G. & Mori, G., 20 Nov 2019, In: Materials. 12.2019, 23, 11 p., 3811.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Influence of Zn and Sn on the Precipitation Behavior of New Al–Mg–Si Alloys

    Glöckel, F., Uggowitzer, P. J., Felfer, P., Pogatscher, S. & Höppel, H. W., 10 Aug 2019, In: Materials. 12.2019, 16, 13 p., 2547.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment

    Horky, J., Ghaffar, A., Werbach, K., Mingler, B., Pogatscher, S., Schäublin, R., Setman, D., Uggowitzer, P. J., Löffler, J. F. & Zehetbauer, M. J., 2 Aug 2019, In: Materials. 12.2019, 15, 18 p., 2460.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Photopatternable Epoxy-Based Thermosets

    Giebler, M., Radl, S., Ules, T., Griesser, T. & Schlögl, S., 24 Jul 2019, In: Materials. 12.2019, 15, 12 p., 2350.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Effect of Thermal Treatments on Sn-Alloyed Al-Mg-Si Alloys

    Schmid, F., Uggowitzer, P., Schäublin, R. E., Werinos, M., Ebner, T. & Pogatscher, S., 3 Jun 2019, In: Materials. 12.2019, 11, 19 p., 1801.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Effect of Compositional and Processing Variations in New 5182-Type AlMgMn Alloys on Mechanical Properties and Deformation Surface Quality

    Ebenberger, P., Uggowitzer, P., Gerold, B. & Pogatscher, S., 20 May 2019, In: Materials. 12.2019, 10, 21 p., 1645.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Reduction of Haematite Using Hydrogen Thermal Plasma

    Naseri Seftejani, M., Schenk, J. & Zarl, M. A., 16 May 2019, In: Materials. 12.2019, 10, 22 p., 1608.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    On the Statistical Size Effect of Cast Aluminium

    Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., 14 May 2019, In: Materials. 12.2019, 10, 19 p., 1578.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering

    Wimler, D., Lindemann, J., Clemens, H. & Mayer, S., 9 May 2019, In: Materials. 12.2019, 9, 12 p., 1523.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Electron irradiation effects on strength and ductility of polymer foils studied by femtosecond laser-processed micro-tensile specimens

    Pfeifenberger, M. J., Milassin, G., Hohenwarter, A., Putz, B., Semprimoschnig, C. O. A. & Pippan, R., 7 May 2019, In: Materials. 12.2019, 9, 16 p., 1468.

    Research output: Contribution to journal › Article › Research › peer-review

  95. E-pub ahead of print

    An ab initio study of vacancies in disordered magnetic systems: A Case Study of Fe-Rich Fe-Al Phases

    Miháliková, I., Friák, M., Koutná, N., Holec, D. & Šob, M., 2 May 2019, (E-pub ahead of print) In: Materials. 12.2019, 9, 16 p., 1430.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Structure Property Relationships in Shape Memory Metallic Glass Composites

    Sopu, D., Yuan, X. D., Moitzi, F., Stoica, M. & Eckert, J., 1 May 2019, In: Materials. 12.2019, 9, 10 p., 1419.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Thermal Expansion and Other Thermodynamic Properties of α2-Ti3Al and γ-TiAl Intermetallic Phases from First Principles Methods

    Holec, D., Abdoshahi, N., Mayer, S. & Clemens, H., 19 Apr 2019, In: Materials. 12.2019, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Experimental Chemistry and Structural Stability of AlNb3 Enabled by Antisite Defects Formation

    Koutná, N., Erdely, P., Zöhrer, S., Franz, R., Du, Y., Liu, S., Mayrhofer, P. H. & Holec, D., 3 Apr 2019, In: Materials. 12.2019, 7, p. 1-11 11 p., 1104.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11 High-Entropy Alloys

    Zhang, Z., Song, K. K., Li, R., Xue, Q. S., Wu, S., Yan, D., Li, X. L., Song, B., Sarac, B., Kim, J. T., Ramasamy, P., Wang, L. & Eckert, J., 15 Feb 2019, In: Materials. 12.2019, 4, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Copper/Epoxy Joints in Printed Circuit Boards: Manufacturing and Interfacial Failure Mechanisms

    Nothdurft, P., Rieß, G. & Kern, W., 12 Feb 2019, In: Materials. 12.2019, 3, 18 p., 550.

    Research output: Contribution to journal › Review article › peer-review

  101. Published

    Diffusive steel scrap melting in carbon-saturated hot metal-Phenomenological investigation at the solid-liquid interface

    Penz, F. M., Schenk, J., Ammer, R., Klösch, G., Pastucha, K. & Reischl, M., 1 Jan 2019, In: Materials. 12.2019, 8, 1358.

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2018
  103. E-pub ahead of print

    Origin of the Low Magnetic Moment in Fe₂AlTi: An Ab Initio Study

    Friák, M., Slávik, A., Miháliková, I., Holec, D., Všianská, M., Šob, M., Palm, M. & Neugebauer, J., 14 Sept 2018, (E-pub ahead of print) In: Materials. 11.2018, 9, 10 p., 1732.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    An ab initio study of thermodynamic and mechanical stability of heusler-based Fe2AlCo polymorphs

    Friák, M., Oweisová, S., Pavlu, J., Holec, D. & Šob, M., 27 Aug 2018, In: Materials. 11.2018, 9, 12 p., 1543.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment

    Zhang, C.-C., Wang, H.-Y., Zha, M., Wang, C., Li, J.-H., Yang, Z.-Z. & Jiang, Q.-C., 26 May 2018, In: Materials. 11.2018, 6, 11 p., 895.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  107. Published

    Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy

    Schuh, B., Völker, B., Todt, J., Kormout, K. S., Schell, N. & Hohenwarter, A., 24 Apr 2018, In: Materials. 11.2019, 5, 18 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations