Intermetallics, ‎0966-9795

Journal

ISSNs0966-9795
1 - 62 out of 62Page size: 100

Research output

  1. 2023
  2. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 161.2023, October, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Phase stability of TiAl-based BCC high entropy alloys

    Hatzenbichler, L., Zeisl, S., Clemens, H. & Holec, D., 7 Apr 2023, In: Intermetallics. 158.2023, July, 9 p., 107893.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    In-situ transmission electron microscopy analysis of the degree of heterogeneities in a metallic glass

    Zhang, N. Z., Sun, K., Şopu, D., Spieckermann, F., Ma, X., Geng, C., Bian, X., Jia, Y., Wang, Q., Wang, G. & Eckert, J., Mar 2023, In: Intermetallics. 154.2023, March, 10 p., 107807.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide

    Zeiler, S., Lintner, A., Schloffer, M., Pippan, R. & Hohenwarter, A., 22 Feb 2023, (E-pub ahead of print) In: Intermetallics. 156.2023, May, 9 p., 107852.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures

    Zhang, Z.-Q., Fellner, S., Ketov, S. V., Cordill, M., Sheng, H., Mitterer, C., Song, K., Gammer, C. & Eckert, J., Feb 2023, In: Intermetallics. 153.2023, February, p. 1-11 11 p., 107797.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2022
  8. E-pub ahead of print

    Plasticity and brittleness of the ordered βo phase in a TNM-TiAl alloy

    Molénat, G., Galy, B., Musi, M., Toualbi, L., Thomas, M., Clemens, H., Monchoux, J.-P. & Couret, A., 6 Sept 2022, (E-pub ahead of print) In: Intermetallics. 151.2022, December, 11 p., 107653.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Phase transformations and phase stability in the Ti–44 at.%Al–(0–7 at.%) Mo system

    Musi, M., Clemens, H., Stark, A., Staron, P. & Spörk-Erdely, P., Apr 2022, In: Intermetallics. 143.2022, April, 9 p., 107484.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Nanoindentation creep behavior of an Fe–Cr–Mo–B–C amorphous coating via atmospheric plasma spraying

    Dong, Q., Tan, J., Huang, R., Wang, H., Song, P., Li, C. J., Feng, Z. X., Calin, M. & Eckert, J., Feb 2022, In: Intermetallics. 141.2022, February, 9 p., 107411.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2021
  12. Published

    Effects of tungsten alloying and fluorination on the oxidation behavior of intermetallic titanium aluminides for aerospace applications

    Donchev, A., Mengis, L., Couret, A., Mayer, S., Clemens, H. & Galetz, M., Dec 2021, In: Intermetallics. 139.2021, December, 14 p., 107270.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphology

    Wimler, D., Lindemann, J., Kremmer, T., Clemens, H. & Mayer, S., Nov 2021, In: Intermetallics. 138.2021, November, 10 p., 107316.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Designing advanced intermetallic titanium aluminide alloys for additive manufacturing

    Wimler, D., Lindemann, J., Reith, M., Kirchner, A., Allen, M., Vargas, W. G., Franke, M., Klöden, B., Weißgärber, T., Güther, V., Schloffer, M., Clemens, H. & Mayer, S., Apr 2021, In: Intermetallics. 131.2021, April, p. 1-10 10 p., 107109.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Comparative irradiation response of an austenitic stainless steel with its high-entropy alloy counterpart

    Tunes, M., Greaves, G., Bei, H., Edmondson, P. D., Zhang, Y., Donnelly, S. E. & Schön, C. G., 2021, In: Intermetallics. 132.2021, May, 13 p., 107130.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2020
  17. Published

    Influence of combinatorial annealing and plastic deformation treatments on the intrinsic properties of Cu46Zr46Al8 bulk metallic glass

    Rezvan, A., Sarac, B., Soprunyuk, V., Kim, J. T., Song, K. K., Li, C., Schranz, W. T. & Eckert, J., 6 Oct 2020, In: Intermetallics. 127.2020, December, 106986.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2019
  19. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106611.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds

    Kulo, N., He, S., Ecker, W., Pippan, R., Antretter, T. & Razumovskiy, V. I., Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106604.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Investigating sluggish diffusion in a concentrated solid solution alloy using ion irradiation with in situ TEM

    Tunes, M. A., Le, H., Greaves, G., Schön, C. G., Bei, H., Zhang, Y., Edmondson, P. D. & Donnelly, S. E., 1 Jul 2019, In: Intermetallics. 110.2019, July, 106461.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry

    Thurston, K. V. S., Hohenwarter, A., Laplanche, G., George, E. P., Gludovatz, B. & Ritchie, R. O., 9 May 2019, In: Intermetallics. 110.2019, July, 106469.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Microstructure and magnetic property of LaFe11.6Si1.4 magnetocaloric alloys by a novel short time heat treatment

    Yang, L., Zhou, Z., Feng, S., Li, J., Liu, J., Li, J., Hu, Q. & Li, J., 1 Feb 2019, In: Intermetallics. 105.2019, February, p. 1-5 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2018
  25. E-pub ahead of print

    Metallurgical processing of titanium aluminides on industrial scale

    Güther, V., Allen, M., Klose, J. & Clemens, H., 26 Sept 2018, (E-pub ahead of print) In: Intermetallics. 103.2018, December, p. 12-22 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys

    Kim, J. T., Hong, S. H., Bian, X., Gokuldoss, P. K., Song, K., Eckert, J., Park, J. M. & Kim, K. B., 17 May 2018, In: Intermetallics. 99.2018, August, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Anisotropic elastic properties and phase stability of B2 and B19 CuZr structures under hydrostatic pressure

    Li, F. X., Hao, P. D., Yi, J. H., Şopu, D., Tan, J., Chong, X. Y. & Eckert, J., 30 Apr 2018, In: Intermetallics. 98.2018, July, p. 60-68 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2 Apr 2018, (E-pub ahead of print) In: Intermetallics. 97.2018, June, p. 27-33 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Bulk metallic dual phase glasses by severe plastic deformation

    Krämer, L., Champion, Y., Kormout, K. S., Maier-Kiener, V. & Pippan, R., 12 Jan 2018, In: Intermetallics. 94.2018, March, p. 172-178 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. 2017
  31. Published

    Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi

    Thurston, K. V. S., Gludovatz, B., Hohenwarter, A., Laplanche, G., George, E. P. & Ritchie, R. O., 1 Sept 2017, In: Intermetallics. 88.2017, September, p. 65-72 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity

    Zhang, L., He, Z., Tan, J., Zhang, Y., Stoica, M., Prashanth, K. G., Cordill, M., Jiang, Y. H., Zhou, R. & Eckert, J., 1 Mar 2017, In: Intermetallics. 82.2017, March, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 1 Feb 2017, (E-pub ahead of print) In: Intermetallics. 85.2017, June, p. 26-33 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity

    Zhang, L., He, Z. Y., Tan, J., Zhang, Y. Q., Stoica, M., Calin, M., Prashanth, K. G., Cordill, M., Jiang, Y. H., Zhou, R. & Eckert, J., 5 Jan 2017, (E-pub ahead of print) In: Intermetallics. 84.2017, May, p. 35-41 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80.2017, January, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2016
  38. E-pub ahead of print

    Ion milling-induced micrometer-sized heterogeneities and partial crystallization in a TiZrCuFeBe bulk metallic glass

    Zhang, L., Pauly, S., Zhu, Z., Gemming, T., Fu, H., Eckert, J. & Zhang, H., 27 Feb 2016, (E-pub ahead of print) In: Intermetallics. 73.2016, June, p. 5-11 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Atomic structure and thermal behavior of (Co0.65,Fe0.35)72Ta8B20 metallic glass with excellent soft magnetic properties

    Taghvaei, A. H., Bednarčik, J. & Eckert, J., 1 Feb 2016, In: Intermetallics. 69.2016, February, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Preparation of cast-iron-based nanocrystalline alloy with Cu and Nb addition

    Jung, H. Y., Stoica, M., Yi, S., Kim, D. H. & Eckert, J., 1 Feb 2016, In: Intermetallics. 69.2016, February, p. 54-61 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Ti-based bulk glassy composites obtained by replacement of Ni with Ga

    Rǎduţǎ, A., Nicoarǎ, M., Locovei, C., Eckert, J. & Stoica, M., Feb 2016, In: Intermetallics. 69.2016, February, p. 28-34 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2015
  43. E-pub ahead of print

    Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 14 Apr 2015, (E-pub ahead of print) In: Intermetallics. 63.2015, August, p. 19-26 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase

    Holec, D., Legut, D., Isaeva, L., Souvatzis, P., Clemens, H. & Mayer, S., 1 Jan 2015, In: Intermetallics. 61, p. 85-90 6 p., 5631.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    In-situ study of the time-temperature-transformation behaviour of a multi-phase intermetallic beta-stabilised TiAl alloy

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2015, In: Intermetallics. 57, p. 17-24

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2014
  47. Published

    Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy

    Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    High-temperature oxidation behavior of multi-phase Mo-containing gamma-TiAl-based alloys

    Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M., 2014, In: Intermetallics. 53, p. 45-55

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Mayer, S., Lindemann, J., Klose, J., Smarsly, W. & Guether, V., 2014, In: Intermetallics. 44, p. 128-140

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2013
  52. Published

    An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a beta-phase containing TiAl alloy

    Schmölzer, T., Liss, K.-D., Kirchlechner, C., Mayer, S., Stark, A., Peel, M. & Clemens, H., 2013, In: Intermetallics. 39, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Diffusive and massive phase transformations in Ti-Al-Nb alloys - Modelling and experiments

    Gamsjäger, E., Liu, Y., Rester, M., Puschnig, P., Draxl, C., Clemens, H., Dehm, G. & Fischer, F. D., 2013, In: Intermetallics. 38, p. 126-138

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2012
  55. Published

    Microstructure development and hardness of a powder metallurgical multi phase y-TiAl based alloy

    Schloffer, M., Iqbal, F., Gabrisch, H., Schwaighofer, E., Schimansky, F.-P., Mayer, S., Stark, A., Lippmann, T., Göken, M., Pyczak, F. & Clemens, H., 2012, In: Intermetallics. 22, p. 231-240

    Research output: Contribution to journal › Article › Research › peer-review

  56. 2010
  57. Published

    Can local hot spots induce alpha2/gamma lamellae during incomplete massive transformation of gamma-TiAl alloys?

    Fischer, F. D., Cha, L., Dehm, G. & Clemens, H., 2010, In: Intermetallics. 18, p. 972-976

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Environmental protection of the γ TiAl based alloy Ti-45Al-8Nb by CrAlYN thin films and thermal barrier coatings

    Braun, R., Rovere, F., Mayrhofer, P. H. & Leyens, C., 2010, In: Intermetallics. 18, p. 479-486

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Evolution of microstructure and texture in Ti-46Al-9Nb sheet material during tensile flow at elevated temperatures

    Bystrzanowski, S., Bartels, A., Stark, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2010, In: Intermetallics. p. 1046-1055

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Phase fractions, transition and ordering temperatures in TiAl-Nb-Mo alloys: An in- and ex-situ study

    Schmölzer, T., Liss, K.-D., Zickler, G., Watson, I. J., Droessler, L., Wallgram, W., Buslaps, T., Studer, A. & Clemens, H., 2010, In: Intermetallics. p. 1544-1552

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Precipitation behavior of intermetallic NiAl particles in Fe-6 at.%Al-4 at.%Ni analyzed by SANS and 3DAP

    Schober, M., Lerchbacher, C., Eidenberger, E., Staron, P., Clemens, H. & Leitner, H., 2010, In: Intermetallics. p. 1553-1559

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Spinodal decomposition in Fe-25 at%Co-9 at%Mo

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H. & Clemens, H., 2010, In: Intermetallics. p. 2128-2135

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journal › Article › Research › peer-review

  64. 2008
  65. Published

    Characteristics of the tensile flow behavior of Nb-46Al-9Nb sheet material – analysis of thermally-activated processes of plastic deformation

    Bystrzanowski, S., BARTELS, A., Clemens, H. & Gerling, R., 2008, In: Intermetallics. 16, p. 717-726

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    In- and Ex-situ Investigation of the beta-phase in a Nb and Mo Containing gamma-TiAl Based Alloy

    Clemens, H., Chladil, H., Wallgram, W., Zickler, G., Gerling, R., Liss, K.-D., Kremmer, S., Güther, V. & Smarsly, W., 2008, In: Intermetallics. 16, p. 827-833

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Microstructure and Mechanical Properties of Ti-45Al-5Nb + (0 - 0.5C) Sheets

    Gerling, R., Schimansky, F. P., Stark, A., BARTELS, A., Kestler, H., Cha, L., Scheu, C. & Clemens, H., 2008, In: Intermetallics. 16, p. 689-697

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Nanometer-scaled lamellar microstructures in Ti–45Al–7.5Nb–(0; 0.5)C alloys and their influence on hardness

    Cha, L., Scheu, C., Clemens, H., Chladil, H., Dehm, G., Gerling, R. & BARTELS, A., 2008, In: Intermetallics. 16, p. 868-875

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    On the influence of coating and oxidation on the mechanical properties of a gamma-TiAl based alloy

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008, In: Intermetallics. 16, p. 1206-1211

    Research output: Contribution to journal › Article › Research › peer-review

  70. 2007
  71. Published

    Prediction and thermodynamic analysis of In-activities of In-Ni alloys

    Waldner, P., 2007, In: Intermetallics. 15, p. 532-538

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2006
  73. Published

    Grain refinement in gamma-TiAl-based alloys by solid state phase transformations

    Clemens, H., Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Dehm, G., Gerling, R. & Schimansky, F.-P., 2006, In: Intermetallics. 14, p. 1380-1385

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Phase Transformations in High Niobium and Carbon Containing g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Schimansky, F. P. & Kremmer, S., 2006, In: Intermetallics. 14, p. 1194-1198

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Texture evolution of the gamma- and the a/a2-phase during hot rolling of gamma-TiAl based alloys

    Schillinger, W., Bartels, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Intermetallics. 14, p. 336-347

    Research output: Contribution to journal › Article › Research › peer-review

  76. 2005
  77. Published

    Creep Behaviour and Related High Temperature Microstructural Stability of Ti-46Al-9Nb Sheet

    Bystrzanowski, S., Bartels, A., Clemens, H., Gerling, R., Schimansky, F. P., Dehm, G. & Kestler, H., 2005, In: Intermetallics. 13, p. 515-524

    Research output: Contribution to journal › Article › Research › peer-review

  78. 2004
  79. Published

    Sputter-deposited Al-Au coatings

    Mitterer, C., Lenhart, H., Mayrhofer, P. H. & Kathrein, M., 2004, In: Intermetallics. 12, p. 579-587

    Research output: Contribution to journal › Article › Research › peer-review

  80. 2002
  81. Published

    The nonstoichiometric ξ-Ni2In phase with B82-structure: thermodynamic modelling

    Waldner, P. & Ipser, H., 2002, In: Intermetallics. 10, p. 485-491

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations